Kconfig 38.5 KB
Newer Older
1
#
2
# GPIO infrastructure and drivers
3
4
#

5
6
7
8
9
10
11
12
config ARCH_HAVE_CUSTOM_GPIO_H
	bool
	help
	  Selecting this config option from the architecture Kconfig allows
	  the architecture to provide a custom asm/gpio.h implementation
	  overriding the default implementations.  New uses of this are
	  strongly discouraged.

Michael Buesch's avatar
Michael Buesch committed
13
14
menuconfig GPIOLIB
	bool "GPIO Support"
Linus Walleij's avatar
Linus Walleij committed
15
	select ANON_INODES
Michael Buesch's avatar
Michael Buesch committed
16
17
18
	help
	  This enables GPIO support through the generic GPIO library.
	  You only need to enable this, if you also want to enable
19
	  one or more of the GPIO drivers below.
Michael Buesch's avatar
Michael Buesch committed
20
21

	  If unsure, say N.
22

Michael Buesch's avatar
Michael Buesch committed
23
if GPIOLIB
24

25
26
config OF_GPIO
	def_bool y
27
	depends on OF
28
	depends on HAS_IOMEM
29

Mathias Nyman's avatar
Mathias Nyman committed
30
31
32
33
config GPIO_ACPI
	def_bool y
	depends on ACPI

34
config GPIOLIB_IRQCHIP
35
	select IRQ_DOMAIN
36
37
	bool

38
39
40
41
42
config DEBUG_GPIO
	bool "Debug GPIO calls"
	depends on DEBUG_KERNEL
	help
	  Say Y here to add some extra checks and diagnostics to GPIO calls.
43
44
45
	  These checks help ensure that GPIOs have been properly initialized
	  before they are used, and that sleeping calls are not made from
	  non-sleeping contexts.  They can make bitbanged serial protocols
46
47
48
	  slower.  The diagnostics help catch the type of setup errors
	  that are most common when setting up new platforms or boards.

David Brownell's avatar
David Brownell committed
49
50
config GPIO_SYSFS
	bool "/sys/class/gpio/... (sysfs interface)"
51
	depends on SYSFS
David Brownell's avatar
David Brownell committed
52
53
54
55
56
57
58
59
60
61
62
63
	help
	  Say Y here to add a sysfs interface for GPIOs.

	  This is mostly useful to work around omissions in a system's
	  kernel support.  Those are common in custom and semicustom
	  hardware assembled using standard kernels with a minimum of
	  custom patches.  In those cases, userspace code may import
	  a given GPIO from the kernel, if no kernel driver requested it.

	  Kernel drivers may also request that a particular GPIO be
	  exported to userspace; this can be useful when debugging.

Grant Likely's avatar
Grant Likely committed
64
config GPIO_GENERIC
65
	depends on HAS_IOMEM # Only for IOMEM drivers
Grant Likely's avatar
Grant Likely committed
66
67
	tristate

68
# put drivers in the right section, in alphabetical order
69

70
# This symbol is selected by both I2C and SPI expanders
71
72
73
config GPIO_MAX730X
	tristate

74
menu "Memory mapped GPIO drivers"
75
	depends on HAS_IOMEM
76

77
78
79
80
81
82
83
84
85
86
87
88
89
90
config GPIO_74XX_MMIO
	tristate "GPIO driver for 74xx-ICs with MMIO access"
	depends on OF_GPIO
	select GPIO_GENERIC
	help
	  Say yes here to support GPIO functionality for 74xx-compatible ICs
	  with MMIO access. Compatible models include:
	    1 bit:	741G125 (Input), 741G74 (Output)
	    2 bits:	742G125 (Input), 7474 (Output)
	    4 bits:	74125 (Input), 74175 (Output)
	    6 bits:	74365 (Input), 74174 (Output)
	    8 bits:	74244 (Input), 74273 (Output)
	    16 bits:	741624 (Input), 7416374 (Output)

91
92
93
94
95
96
97
98
99
config GPIO_ALTERA
	tristate "Altera GPIO"
	depends on OF_GPIO
	select GPIOLIB_IRQCHIP
	help
	  Say Y or M here to build support for the Altera PIO device.

	  If driver is built as a module it will be called gpio-altera.

YD Tseng's avatar
YD Tseng committed
100
101
102
config GPIO_AMDPT
	tristate "AMD Promontory GPIO support"
	depends on ACPI
103
	select GPIO_GENERIC
YD Tseng's avatar
YD Tseng committed
104
105
106
107
	help
	  driver for GPIO functionality on Promontory IOHub
	  Require ACPI ASL code to enumerate as a platform device.

Joel Stanley's avatar
Joel Stanley committed
108
109
110
111
112
113
114
config GPIO_ASPEED
	tristate "Aspeed GPIO support"
	depends on (ARCH_ASPEED || COMPILE_TEST) && OF_GPIO
	select GPIOLIB_IRQCHIP
	help
	  Say Y here to support Aspeed AST2400 and AST2500 GPIO controllers.

115
116
117
config GPIO_ATH79
	tristate "Atheros AR71XX/AR724X/AR913X GPIO support"
	default y if ATH79
118
	depends on ATH79 || COMPILE_TEST
119
	select GPIO_GENERIC
120
	select GPIOLIB_IRQCHIP
121
122
123
124
	help
	  Select this option to enable GPIO driver for
	  Atheros AR71XX/AR724X/AR913X SoC devices.

125
126
127
128
config GPIO_RASPBERRYPI_EXP
	tristate "Raspberry Pi 3 GPIO Expander"
	default RASPBERRYPI_FIRMWARE
	depends on OF_GPIO
129
	depends on (ARCH_BCM2835 && RASPBERRYPI_FIRMWARE) || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE)
130
131
132
133
	help
	  Turn on GPIO support for the expander on Raspberry Pi 3 boards, using
	  the firmware mailbox to communicate with VideoCore on BCM283x chips.

134
135
136
137
138
139
config GPIO_BCM_KONA
	bool "Broadcom Kona GPIO"
	depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST)
	help
	  Turn on GPIO support for Broadcom "Kona" chips.

140
141
config GPIO_BRCMSTB
	tristate "BRCMSTB GPIO support"
142
143
	default y if (ARCH_BRCMSTB || BMIPS_GENERIC)
	depends on OF_GPIO && (ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST)
144
	select GPIO_GENERIC
145
	select IRQ_DOMAIN
146
147
148
	help
	  Say yes here to enable GPIO support for Broadcom STB (BCM7XXX) SoCs.

149
config GPIO_CLPS711X
150
	tristate "CLPS711X GPIO support"
151
	depends on ARCH_CLPS711X || COMPILE_TEST
152
153
154
	select GPIO_GENERIC
	help
	  Say yes here to support GPIO on CLPS711X SoCs.
155

156
157
158
159
160
161
162
config GPIO_DAVINCI
	bool "TI Davinci/Keystone GPIO support"
	default y if ARCH_DAVINCI
	depends on ARM && (ARCH_DAVINCI || ARCH_KEYSTONE)
	help
	  Say yes here to enable GPIO support for TI Davinci/Keystone SoCs.

163
164
165
166
167
168
169
170
config GPIO_DWAPB
	tristate "Synopsys DesignWare APB GPIO driver"
	select GPIO_GENERIC
	select GENERIC_IRQ_CHIP
	help
	  Say Y or M here to build support for the Synopsys DesignWare APB
	  GPIO block.

Magnus Damm's avatar
Magnus Damm committed
171
172
config GPIO_EM
	tristate "Emma Mobile GPIO"
173
	depends on (ARCH_EMEV2 || COMPILE_TEST) && OF_GPIO
Magnus Damm's avatar
Magnus Damm committed
174
175
176
	help
	  Say yes here to support GPIO on Renesas Emma Mobile SoCs.

177
178
179
config GPIO_EP93XX
	def_bool y
	depends on ARCH_EP93XX
180
	select GPIO_GENERIC
181

Rabin Vincent's avatar
Rabin Vincent committed
182
183
184
config GPIO_ETRAXFS
	bool "Axis ETRAX FS General I/O"
	depends on CRIS || COMPILE_TEST
185
	depends on OF_GPIO
Rabin Vincent's avatar
Rabin Vincent committed
186
	select GPIO_GENERIC
187
	select GPIOLIB_IRQCHIP
Rabin Vincent's avatar
Rabin Vincent committed
188
189
190
	help
	  Say yes here to support the GPIO controller on Axis ETRAX FS SoCs.

191
192
193
194
195
196
197
config GPIO_EXAR
	tristate "Support for GPIO pins on XR17V352/354/358"
	depends on SERIAL_8250_EXAR
	help
	  Selecting this option will enable handling of GPIO pins present
	  on Exar XR17V352/354/358 chips.

198
199
200
201
202
203
204
205
206
207
208
209
config GPIO_GE_FPGA
	bool "GE FPGA based GPIO"
	depends on GE_FPGA
	select GPIO_GENERIC
	help
	  Support for common GPIO functionality provided on some GE Single Board
	  Computers.

	  This driver provides basic support (configure as input or output, read
	  and write pin state) for GPIO implemented in a number of GE single
	  board computers.

210
211
config GPIO_FTGPIO010
	bool "Faraday FTGPIO010 GPIO"
212
213
214
	depends on OF_GPIO
	select GPIO_GENERIC
	select GPIOLIB_IRQCHIP
215
	default (ARCH_GEMINI || ARCH_MOXART)
216
	help
217
218
	  Support for common GPIOs from the Faraday FTGPIO010 IP core, found in
	  Cortina systems Gemini platforms, Moxa ART and others.
219

220
221
222
223
224
225
226
227
config GPIO_GENERIC_PLATFORM
	tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
	select GPIO_GENERIC
	help
	  Say yes here to support basic platform_device memory-mapped GPIO controllers.

config GPIO_GRGPIO
	tristate "Aeroflex Gaisler GRGPIO support"
228
	depends on OF_GPIO
229
230
231
232
233
234
	select GPIO_GENERIC
	select IRQ_DOMAIN
	help
	  Select this to support Aeroflex Gaisler GRGPIO cores from the GRLIB
	  VHDL IP core library.

235
236
237
238
239
240
241
242
243
config GPIO_HLWD
	tristate "Nintendo Wii (Hollywood) GPIO"
	depends on OF_GPIO
	select GPIO_GENERIC
	help
	  Select this to support the GPIO controller of the Nintendo Wii.

	  If unsure, say N.

244
245
246
247
248
249
250
251
252
253
254
255
256
config GPIO_ICH
	tristate "Intel ICH GPIO"
	depends on PCI && X86
	select MFD_CORE
	select LPC_ICH
	help
	  Say yes here to support the GPIO functionality of a number of Intel
	  ICH-based chipsets.  Currently supported devices: ICH6, ICH7, ICH8
	  ICH9, ICH10, Series 5/3400 (eg Ibex Peak), Series 6/C200 (eg
	  Cougar Point), NM10 (Tiger Point), and 3100 (Whitmore Lake).

	  If unsure, say N.

Paul Cercueil's avatar
Paul Cercueil committed
257
258
config GPIO_INGENIC
	tristate "Ingenic JZ47xx SoCs GPIO support"
259
	depends on OF
Paul Cercueil's avatar
Paul Cercueil committed
260
261
262
263
264
265
266
267
	depends on MACH_INGENIC || COMPILE_TEST
	select GPIOLIB_IRQCHIP
	help
	  Say yes here to support the GPIO functionality present on the
	  JZ4740 and JZ4780 SoCs from Ingenic.

	  If unsure, say N.

268
269
config GPIO_IOP
	tristate "Intel IOP GPIO"
270
271
	depends on ARCH_IOP32X || ARCH_IOP33X || COMPILE_TEST
	select GPIO_GENERIC
272
273
274
275
276
277
278
279
280
281
282
283
	help
	  Say yes here to support the GPIO functionality of a number of Intel
	  IOP32X or IOP33X.

	  If unsure, say N.

config GPIO_LOONGSON
	bool "Loongson-2/3 GPIO support"
	depends on CPU_LOONGSON2 || CPU_LOONGSON3
	help
	  driver for GPIO functionality on Loongson-2F/3A/3B processors.

284
config GPIO_LPC18XX
285
	tristate "NXP LPC18XX/43XX GPIO support"
286
287
288
289
290
291
	default y if ARCH_LPC18XX
	depends on OF_GPIO && (ARCH_LPC18XX || COMPILE_TEST)
	help
	  Select this option to enable GPIO driver for
	  NXP LPC18XX/43XX devices.

292
293
294
295
296
297
298
299
config GPIO_LYNXPOINT
	tristate "Intel Lynxpoint GPIO support"
	depends on ACPI && X86
	select GPIOLIB_IRQCHIP
	help
	  driver for GPIO functionality on Intel Lynxpoint PCH chipset
	  Requires ACPI device enumeration code to set up a platform device.

300
config GPIO_MB86S7X
301
	tristate "GPIO support for Fujitsu MB86S7x Platforms"
302
303
304
	help
	  Say yes here to support the GPIO controller in Fujitsu MB86S70 SoCs.

305
306
307
308
309
310
311
config GPIO_MENZ127
	tristate "MEN 16Z127 GPIO support"
	depends on MCB
	select GPIO_GENERIC
	help
	 Say yes here to support the MEN 16Z127 GPIO Controller

312
313
314
315
316
317
318
319
config GPIO_MM_LANTIQ
	bool "Lantiq Memory mapped GPIOs"
	depends on LANTIQ && SOC_XWAY
	help
	  This enables support for memory mapped GPIOs on the External Bus Unit
	  (EBU) found on Lantiq SoCs. The gpios are output only as they are
	  created by attaching a 16bit latch to the bus.

320
321
config GPIO_MOCKUP
	tristate "GPIO Testing Driver"
322
	depends on GPIOLIB && SYSFS
323
	select GPIO_SYSFS
324
	select GPIOLIB_IRQCHIP
325
	select IRQ_SIM
326
327
328
329
330
331
332
333
	help
	  This enables GPIO Testing driver, which provides a way to test GPIO
	  subsystem through sysfs(or char device) and debugfs. GPIO_SYSFS
	  must be selected for this test.
	  User could use it through the script in
	  tools/testing/selftests/gpio/gpio-mockup.sh. Reference the usage in
	  it.

334
335
336
337
config GPIO_MPC5200
	def_bool y
	depends on PPC_MPC52xx

338
config GPIO_MPC8XXX
339
	bool "MPC512x/MPC8xxx/QorIQ GPIO support"
340
	depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
341
342
343
		   FSL_SOC_BOOKE || PPC_86xx || ARCH_LAYERSCAPE || ARM || \
		   COMPILE_TEST
	select GPIO_GENERIC
Arnd Bergmann's avatar
Arnd Bergmann committed
344
	select IRQ_DOMAIN
345
346
	help
	  Say Y here if you're going to use hardware that connects to the
347
	  MPC512x/831x/834x/837x/8572/8610/QorIQ GPIOs.
348

349
350
config GPIO_MVEBU
	def_bool y
351
	depends on PLAT_ORION || ARCH_MVEBU
352
	depends on OF_GPIO
353
	select GENERIC_IRQ_CHIP
354
	select REGMAP_MMIO
355

356
357
358
config GPIO_MXC
	def_bool y
	depends on ARCH_MXC
Grant Likely's avatar
Grant Likely committed
359
	select GPIO_GENERIC
360
	select GENERIC_IRQ_CHIP
Grant Likely's avatar
Grant Likely committed
361
362
363
364

config GPIO_MXS
	def_bool y
	depends on ARCH_MXS
365
	select GPIO_GENERIC
366
	select GENERIC_IRQ_CHIP
367

368
369
370
371
372
373
374
375
config GPIO_OCTEON
	tristate "Cavium OCTEON GPIO"
	depends on GPIOLIB && CAVIUM_OCTEON_SOC
	default y
	help
	  Say yes here to support the on-chip GPIO lines on the OCTEON
	  family of SOCs.

376
config GPIO_OMAP
377
	tristate "TI OMAP GPIO support" if ARCH_OMAP2PLUS || COMPILE_TEST
378
	default y if ARCH_OMAP
379
380
	depends on ARM
	select GENERIC_IRQ_CHIP
381
	select GPIOLIB_IRQCHIP
382
383
384
	help
	  Say yes here to enable GPIO support for TI OMAP SoCs.

385
386
config GPIO_PL061
	bool "PrimeCell PL061 GPIO support"
387
	depends on ARM_AMBA
388
	select IRQ_DOMAIN
389
	select GPIOLIB_IRQCHIP
390
391
392
	help
	  Say yes here to support the PrimeCell PL061 GPIO device

393
394
395
396
397
398
config GPIO_PXA
	bool "PXA GPIO support"
	depends on ARCH_PXA || ARCH_MMP
	help
	  Say yes here to support the PXA GPIO device

399
400
config GPIO_RCAR
	tristate "Renesas R-Car GPIO"
Simon Horman's avatar
Simon Horman committed
401
	depends on ARCH_RENESAS || COMPILE_TEST
402
	select GPIOLIB_IRQCHIP
403
404
405
	help
	  Say yes here to support GPIO on Renesas R-Car SoCs.

406
407
408
409
410
411
config GPIO_REG
	bool
	help
	  A 32-bit single register GPIO fixed in/out implementation.  This
	  can be used to represent any register as a set of GPIO signals.

412
413
414
415
416
417
418
config GPIO_SPEAR_SPICS
	bool "ST SPEAr13xx SPI Chip Select as GPIO support"
	depends on PLAT_SPEAR
	select GENERIC_IRQ_CHIP
	help
	  Say yes here to support ST SPEAr SPI Chip Select as GPIO device

419
420
421
422
423
424
425
426
config GPIO_STA2X11
	bool "STA2x11/ConneXt GPIO support"
	depends on MFD_STA2X11
	select GENERIC_IRQ_CHIP
	help
	  Say yes here to support the STA2x11/ConneXt GPIO device.
	  The GPIO module has 128 GPIO pins with alternate functions.

427
428
429
430
431
432
433
434
435
436
config GPIO_STP_XWAY
	bool "XWAY STP GPIOs"
	depends on SOC_XWAY
	help
	  This enables support for the Serial To Parallel (STP) unit found on
	  XWAY SoC. The STP allows the SoC to drive a shift registers cascade,
	  that can be up to 24 bit. This peripheral is aimed at driving leds.
	  Some of the gpios/leds can be auto updated by the soc with dsl and
	  phy status.

437
438
439
440
441
442
config GPIO_SYSCON
	tristate "GPIO based on SYSCON"
	depends on MFD_SYSCON && OF
	help
	  Say yes here to support GPIO functionality though SYSCON driver.

443
444
445
446
447
config GPIO_TB10X
	bool
	select GENERIC_IRQ_CHIP
	select OF_GPIO

448
config GPIO_TEGRA
449
450
	bool "NVIDIA Tegra GPIO support"
	default ARCH_TEGRA
451
	depends on ARCH_TEGRA || COMPILE_TEST
452
	depends on OF_GPIO
453
454
	help
	  Say yes here to support GPIO pins on NVIDIA Tegra SoCs.
455

Thierry Reding's avatar
Thierry Reding committed
456
457
458
459
460
461
462
463
464
config GPIO_TEGRA186
	tristate "NVIDIA Tegra186 GPIO support"
	default ARCH_TEGRA_186_SOC
	depends on ARCH_TEGRA_186_SOC || COMPILE_TEST
	depends on OF_GPIO
	select GPIOLIB_IRQCHIP
	help
	  Say yes here to support GPIO pins on NVIDIA Tegra186 SoCs.

465
466
467
config GPIO_TS4800
	tristate "TS-4800 DIO blocks and compatibles"
	depends on OF_GPIO
468
	depends on SOC_IMX51 || COMPILE_TEST
469
470
471
472
	select GPIO_GENERIC
	help
	  This driver support TS-4800 FPGA GPIO controllers.

473
474
475
config GPIO_THUNDERX
	tristate "Cavium ThunderX/OCTEON-TX GPIO"
	depends on ARCH_THUNDER || (64BIT && COMPILE_TEST)
476
477
	depends on PCI_MSI
	select IRQ_DOMAIN_HIERARCHY
478
479
480
481
482
	select IRQ_FASTEOI_HIERARCHY_HANDLERS
	help
	  Say yes here to support the on-chip GPIO lines on the ThunderX
	  and OCTEON-TX families of SoCs.

483
484
485
486
487
488
489
490
config GPIO_UNIPHIER
	tristate "UniPhier GPIO support"
	depends on ARCH_UNIPHIER || COMPILE_TEST
	depends on OF_GPIO
	select IRQ_DOMAIN_HIERARCHY
	help
	  Say yes here to support UniPhier GPIOs.

491
492
493
494
495
496
497
config GPIO_VF610
	def_bool y
	depends on ARCH_MXC && SOC_VF610
	select GPIOLIB_IRQCHIP
	help
	  Say yes here to support Vybrid vf610 GPIOs.

498
499
500
501
502
503
504
505
config GPIO_VR41XX
	tristate "NEC VR4100 series General-purpose I/O Uint support"
	depends on CPU_VR41XX
	help
	  Say yes here to support the NEC VR4100 series General-purpose I/O Uint

config GPIO_VX855
	tristate "VIA VX855/VX875 GPIO"
506
	depends on (X86 || COMPILE_TEST) && PCI
507
508
509
510
511
512
513
514
515
	select MFD_CORE
	select MFD_VX855
	help
	  Support access to the VX855/VX875 GPIO lines through the gpio library.

	  This driver provides common support for accessing the device,
	  additional drivers must be enabled in order to use the
	  functionality of the device.

516
517
518
519
520
521
522
523
524
config GPIO_XGENE
	bool "APM X-Gene GPIO controller support"
	depends on ARM64 && OF_GPIO
	help
	  This driver is to support the GPIO block within the APM X-Gene SoC
	  platform's generic flash controller. The GPIO pins are muxed with
	  the generic flash controller's address and data pins. Say yes
	  here to enable the GFC GPIO functionality.

525
526
527
528
config GPIO_XGENE_SB
	tristate "APM X-Gene GPIO standby controller support"
	depends on ARCH_XGENE && OF_GPIO
	select GPIO_GENERIC
529
	select GPIOLIB_IRQCHIP
530
	select IRQ_DOMAIN_HIERARCHY
531
532
533
534
	help
	  This driver supports the GPIO block within the APM X-Gene
	  Standby Domain. Say yes here to enable the GPIO functionality.

535
config GPIO_XILINX
536
	tristate "Xilinx GPIO support"
537
	depends on OF_GPIO
538
539
540
	help
	  Say yes here to support the Xilinx FPGA GPIO device

541
542
config GPIO_XLP
	tristate "Netlogic XLP GPIO support"
543
	depends on OF_GPIO && (CPU_XLP || ARCH_THUNDER2 || COMPILE_TEST)
544
545
546
547
	select GPIOLIB_IRQCHIP
	help
	  This driver provides support for GPIO interface on Netlogic XLP MIPS64
	  SoCs. Currently supported XLP variants are XLP8XX, XLP3XX, XLP2XX,
548
549
	  XLP9XX and XLP5XX. The same GPIO controller block is also present in
	  Cavium's ThunderX2 CN99XX SoCs.
550
551
552

	  If unsure, say N.

Baruch Siach's avatar
Baruch Siach committed
553
554
555
config GPIO_XTENSA
	bool "Xtensa GPIO32 support"
	depends on XTENSA
556
	depends on HAVE_XTENSA_GPIO32
Baruch Siach's avatar
Baruch Siach committed
557
558
559
560
561
	depends on !SMP
	help
	  Say yes here to support the Xtensa internal GPIO32 IMPWIRE (input)
	  and EXPSTATE (output) ports

562
563
564
config GPIO_ZEVIO
	bool "LSI ZEVIO SoC memory mapped GPIOs"
	depends on ARM && OF_GPIO
565
	help
566
	  Say yes here to support the GPIO controller in LSI ZEVIO SoCs.
567

568
569
config GPIO_ZYNQ
	tristate "Xilinx Zynq GPIO support"
570
	depends on ARCH_ZYNQ || ARCH_ZYNQMP
571
	select GPIOLIB_IRQCHIP
572
	help
573
	  Say yes here to support Xilinx Zynq GPIO controller.
574

Linus Walleij's avatar
Linus Walleij committed
575
576
config GPIO_ZX
	bool "ZTE ZX GPIO support"
Peter Robinson's avatar
Peter Robinson committed
577
	depends on ARCH_ZX || COMPILE_TEST
Linus Walleij's avatar
Linus Walleij committed
578
579
580
581
	select GPIOLIB_IRQCHIP
	help
	  Say yes here to support the GPIO device on ZTE ZX SoCs.

582
583
584
585
586
587
588
config GPIO_LOONGSON1
	tristate "Loongson1 GPIO support"
	depends on MACH_LOONGSON32
	select GPIO_GENERIC
	help
	  Say Y or M here to support GPIO on Loongson1 SoCs.

589
endmenu
590

591
menu "Port-mapped I/O GPIO drivers"
592
	depends on X86 # Unconditional I/O space access
593

594
595
config GPIO_104_DIO_48E
	tristate "ACCES 104-DIO-48E GPIO support"
596
597
	depends on PC104
	select ISA_BUS_API
598
599
	select GPIOLIB_IRQCHIP
	help
600
601
602
603
	  Enables GPIO support for the ACCES 104-DIO-48E series (104-DIO-48E,
	  104-DIO-24E). The base port addresses for the devices may be
	  configured via the base module parameter. The interrupt line numbers
	  for the devices may be configured via the irq module parameter.
604

605
606
config GPIO_104_IDIO_16
	tristate "ACCES 104-IDIO-16 GPIO support"
607
608
	depends on PC104
	select ISA_BUS_API
609
	select GPIOLIB_IRQCHIP
610
	help
611
612
613
614
615
	  Enables GPIO support for the ACCES 104-IDIO-16 family (104-IDIO-16,
	  104-IDIO-16E, 104-IDO-16, 104-IDIO-8, 104-IDIO-8E, 104-IDO-8). The
	  base port addresses for the devices may be configured via the base
	  module parameter. The interrupt line numbers for the devices may be
	  configured via the irq module parameter.
616

617
618
config GPIO_104_IDI_48
	tristate "ACCES 104-IDI-48 GPIO support"
619
620
	depends on PC104
	select ISA_BUS_API
621
622
	select GPIOLIB_IRQCHIP
	help
623
624
625
626
627
	  Enables GPIO support for the ACCES 104-IDI-48 family (104-IDI-48A,
	  104-IDI-48AC, 104-IDI-48B, 104-IDI-48BC). The base port addresses for
	  the devices may be configured via the base module parameter. The
	  interrupt line numbers for the devices may be configured via the irq
	  module parameter.
628

629
config GPIO_F7188X
630
	tristate "F71869, F71869A, F71882FG, F71889F and F81866 GPIO support"
631
632
	help
	  This option enables support for GPIOs found on Fintek Super-I/O
633
	  chips F71869, F71869A, F71882FG, F71889F and F81866.
634
635
636
637

	  To compile this driver as a module, choose M here: the module will
	  be called f7188x-gpio.

638
639
config GPIO_GPIO_MM
	tristate "Diamond Systems GPIO-MM GPIO support"
640
641
	depends on PC104
	select ISA_BUS_API
642
643
644
645
646
647
648
649
650
651
	help
	  Enables GPIO support for the Diamond Systems GPIO-MM and GPIO-MM-12.

	  The Diamond Systems GPIO-MM device features 48 lines of digital I/O
	  via the emulation of dual 82C55A PPI chips. This driver provides GPIO
	  support for these 48 channels of digital I/O.

	  The base port addresses for the devices may be configured via the base
	  array module parameter.

652
653
654
655
656
657
config GPIO_IT87
	tristate "IT87xx GPIO support"
	help
	  Say yes here to support GPIO functionality of IT87xx Super I/O chips.

	  This driver is tested with ITE IT8728 and IT8732 Super I/O chips, and
658
	  supports the IT8761E, IT8620E and IT8628E Super I/O chip as well.
659
660
661
662
663
664

	  To compile this driver as a module, choose M here: the module will
	  be called gpio_it87

config GPIO_SCH
	tristate "Intel SCH/TunnelCreek/Centerton/Quark X1000 GPIO"
665
	depends on (X86 || COMPILE_TEST) && PCI
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
	select MFD_CORE
	select LPC_SCH
	help
	  Say yes here to support GPIO interface on Intel Poulsbo SCH,
	  Intel Tunnel Creek processor, Intel Centerton processor or
	  Intel Quark X1000 SoC.

	  The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are
	  powered by the core power rail and are turned off during sleep
	  modes (S3 and higher). The remaining four GPIOs are powered by
	  the Intel SCH suspend power supply. These GPIOs remain
	  active during S3. The suspend powered GPIOs can be used to wake the
	  system from the Suspend-to-RAM state.

	  The Intel Tunnel Creek processor has 5 GPIOs powered by the
	  core power rail and 9 from suspend power supply.

	  The Intel Centerton processor has a total of 30 GPIO pins.
	  Twenty-one are powered by the core power rail and 9 from the
	  suspend power supply.

	  The Intel Quark X1000 SoC has 2 GPIOs powered by the core
	  power well and 6 from the suspend power well.

config GPIO_SCH311X
	tristate "SMSC SCH311x SuperI/O GPIO"
	help
	  Driver to enable the GPIOs found on SMSC SMSC SCH3112, SCH3114 and
	  SCH3116 "Super I/O" chipsets.

	  To compile this driver as a module, choose M here: the module will
	  be called gpio-sch311x.

config GPIO_TS5500
	tristate "TS-5500 DIO blocks and compatibles"
	depends on TS5500 || COMPILE_TEST
	help
	  This driver supports Digital I/O exposed by pin blocks found on some
	  Technologic Systems platforms. It includes, but is not limited to, 3
	  blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600
	  LCD port.

708
709
config GPIO_WINBOND
	tristate "Winbond Super I/O GPIO support"
710
	select ISA_BUS_API
711
712
713
714
715
716
717
718
719
720
721
722
723
	help
	  This option enables support for GPIOs found on Winbond Super I/O
	  chips.
	  Currently, only W83627UHG (also known as Nuvoton NCT6627UD) is
	  supported.

	  You will need to provide a module parameter "gpios", or a
	  boot-time parameter "gpio_winbond.gpios" with a bitmask of GPIO
	  ports to enable (bit 0 is GPIO1, bit 1 is GPIO2, etc.).

	  To compile this driver as a module, choose M here: the module will
	  be called gpio-winbond.

724
725
config GPIO_WS16C48
	tristate "WinSystems WS16C48 GPIO support"
726
	select ISA_BUS_API
727
728
	select GPIOLIB_IRQCHIP
	help
729
730
731
732
	  Enables GPIO support for the WinSystems WS16C48. The base port
	  addresses for the devices may be configured via the base module
	  parameter. The interrupt line numbers for the devices may be
	  configured via the irq module parameter.
733

734
735
endmenu

736
737
menu "I2C GPIO expanders"
	depends on I2C
738

739
740
config GPIO_ADP5588
	tristate "ADP5588 I2C GPIO expander"
741
	help
742
743
	  This option enables support for 18 GPIOs found
	  on Analog Devices ADP5588 GPIO Expanders.
744

745
746
747
config GPIO_ADP5588_IRQ
	bool "Interrupt controller support for ADP5588"
	depends on GPIO_ADP5588=y
748
	help
749
750
	  Say yes here to enable the adp5588 to be used as an interrupt
	  controller. It requires the driver to be built in the kernel.
751

752
753
config GPIO_ADNP
	tristate "Avionic Design N-bit GPIO expander"
754
	depends on OF_GPIO
755
756
	select GPIOLIB_IRQCHIP
	help
757
758
759
760
761
762
	  This option enables support for N GPIOs found on Avionic Design
	  I2C GPIO expanders. The register space will be extended by powers
	  of two, so the controller will need to accommodate for that. For
	  example: if a controller provides 48 pins, 6 registers will be
	  enough to represent all pins, but the driver will assume a
	  register layout for 64 pins (8 registers).
763

764
765
766
767
config GPIO_MAX7300
	tristate "Maxim MAX7300 GPIO expander"
	select GPIO_MAX730X
	help
768
	  GPIO driver for Maxim MAX7300 I2C-based GPIO expander.
769

Eric Miao's avatar
Eric Miao committed
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
config GPIO_MAX732X
	tristate "MAX7319, MAX7320-7327 I2C Port Expanders"
	help
	  Say yes here to support the MAX7319, MAX7320-7327 series of I2C
	  Port Expanders. Each IO port on these chips has a fixed role of
	  Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain
	  Input and Output (designed by 'P'). The combinations are listed
	  below:

	  8 bits:	max7319 (8I), max7320 (8O), max7321 (8P),
		  	max7322 (4I4O), max7323 (4P4O)

	  16 bits:	max7324 (8I8O), max7325 (8P8O),
		  	max7326 (4I12O), max7327 (4P12O)

	  Board setup code must specify the model to use, and the start
	  number for these GPIOs.

788
789
config GPIO_MAX732X_IRQ
	bool "Interrupt controller support for MAX732x"
790
	depends on GPIO_MAX732X=y
791
	select GPIOLIB_IRQCHIP
792
793
794
795
	help
	  Say yes here to enable the max732x to be used as an interrupt
	  controller. It requires the driver to be built in the kernel.

796
797
config GPIO_MC9S08DZ60
	bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions"
798
	depends on I2C=y && MACH_MX35_3DS
799
800
801
	help
	  Select this to enable the MC9S08DZ60 GPIO driver

802
config GPIO_PCA953X
Aaron Sierra's avatar
Aaron Sierra committed
803
	tristate "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports"
804
	help
805
806
807
808
809
810
	  Say yes here to provide access to several register-oriented
	  SMBus I/O expanders, made mostly by NXP or TI.  Compatible
	  models include:

	  4 bits:	pca9536, pca9537

811
	  8 bits:	max7310, max7315, pca6107, pca9534, pca9538, pca9554,
812
			pca9556, pca9557, pca9574, tca6408, tca9554, xra1202
813

814
815
	  16 bits:	max7312, max7313, pca9535, pca9539, pca9555, pca9575,
			tca6416
816

817
818
	  24 bits:	tca6424

Aaron Sierra's avatar
Aaron Sierra committed
819
	  40 bits:	pca9505, pca9698
820

821
822
823
config GPIO_PCA953X_IRQ
	bool "Interrupt controller support for PCA953x"
	depends on GPIO_PCA953X=y
824
	select GPIOLIB_IRQCHIP
825
826
827
828
	help
	  Say yes here to enable the pca953x to be used as an interrupt
	  controller. It requires the driver to be built in the kernel.

829
config GPIO_PCF857X
830
	tristate "PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders"
831
	select GPIOLIB_IRQCHIP
832
	select IRQ_DOMAIN
833
834
835
836
837
838
839
	help
	  Say yes here to provide access to most "quasi-bidirectional" I2C
	  GPIO expanders used for additional digital outputs or inputs.
	  Most of these parts are from NXP, though TI is a second source for
	  some of them.  Compatible models include:

	  8 bits:   pcf8574, pcf8574a, pca8574, pca8574a,
840
841
	            pca9670, pca9672, pca9674, pca9674a,
	  	    max7328, max7329
842
843
844
845
846
847
848
849
850
851
852
853

	  16 bits:  pcf8575, pcf8575c, pca8575,
	            pca9671, pca9673, pca9675

	  Your board setup code will need to declare the expanders in
	  use, and assign numbers to the GPIOs they expose.  Those GPIOs
	  can then be used from drivers and other kernel code, just like
	  other GPIOs, but only accessible from task contexts.

	  This driver provides an in-kernel interface to those GPIOs using
	  platform-neutral GPIO calls.

854
855
856
857
858
859
860
861
config GPIO_TPIC2810
	tristate "TPIC2810 8-Bit I2C GPO expander"
	help
	  Say yes here to enable the GPO driver for the TI TPIC2810 chip.

	  To compile this driver as a module, choose M here: the module will
	  be called gpio-tpic2810.

862
863
config GPIO_TS4900
	tristate "Technologic Systems FPGA I2C GPIO"
864
	depends on SOC_IMX6 || COMPILE_TEST
865
866
867
868
869
	select REGMAP_I2C
	help
	  Say yes here to enabled the GPIO driver for Technologic's FPGA core.
	  Series supported include TS-4100, TS-4900, TS-7970 and TS-7990.

870
871
872
endmenu

menu "MFD GPIO expanders"
873
874
875
876
877
878
879
880

config GPIO_ADP5520
	tristate "GPIO Support for ADP5520 PMIC"
	depends on PMIC_ADP5520
	help
	  This option enables support for on-chip GPIO found
	  on Analog Devices ADP5520 PMICs.

881
882
883
884
885
886
887
888
config GPIO_ALTERA_A10SR
	tristate "Altera Arria10 System Resource GPIO"
	depends on MFD_ALTERA_A10SR
	help
	  Driver for Arria10 Development Kit GPIO expansion which
	  includes reads of pushbuttons and DIP switches as well
	  as writes to LEDs.

889
890
891
892
893
894
config GPIO_ARIZONA
	tristate "Wolfson Microelectronics Arizona class devices"
	depends on MFD_ARIZONA
	help
	  Support for GPIOs on Wolfson Arizona class devices.

895
896
897
898
899
900
901
902
903
904
905
config GPIO_BD9571MWV
	tristate "ROHM BD9571 GPIO support"
	depends on MFD_BD9571MWV
	help
	  Support for GPIOs on ROHM BD9571 PMIC. There are two GPIOs
	  available on the ROHM PMIC in total, both of which can also
	  generate interrupts.

	  This driver can also be built as a module. If so, the module
	  will be called gpio-bd9571mwv.

906
907
config GPIO_CRYSTAL_COVE
	tristate "GPIO support for Crystal Cove PMIC"
908
	depends on (X86 || COMPILE_TEST) && INTEL_SOC_PMIC
909
910
911
912
913
914
915
916
917
918
919
920
	select GPIOLIB_IRQCHIP
	help
	  Support for GPIO pins on Crystal Cove PMIC.

	  Say Yes if you have a Intel SoC based tablet with Crystal Cove PMIC
	  inside.

	  This driver can also be built as a module. If so, the module will be
	  called gpio-crystalcove.

config GPIO_CS5535
	tristate "AMD CS5535/CS5536 GPIO support"
921
	depends on X86 || MIPS || COMPILE_TEST
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
	depends on MFD_CS5535
	help
	  The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that
	  can be used for quite a number of things.  The CS5535/6 is found on
	  AMD Geode and Lemote Yeeloong devices.

	  If unsure, say N.

config GPIO_DA9052
	tristate "Dialog DA9052 GPIO"
	depends on PMIC_DA9052
	help
	  Say yes here to enable the GPIO driver for the DA9052 chip.

config GPIO_DA9055
	tristate "Dialog Semiconductor DA9055 GPIO"
	depends on MFD_DA9055
	help
	  Say yes here to enable the GPIO driver for the DA9055 chip.

	  The Dialog DA9055 PMIC chip has 3 GPIO pins that can be
	  be controller by this driver.

	  If driver is built as a module it will be called gpio-da9055.

config GPIO_DLN2
	tristate "Diolan DLN2 GPIO support"
	depends on MFD_DLN2
	select GPIOLIB_IRQCHIP

	help
	  Select this option to enable GPIO driver for the Diolan DLN2
	  board.

	  This driver can also be built as a module. If so, the module
	  will be called gpio-dln2.

959
960
961
962
963
964
965
966
config HTC_EGPIO
	bool "HTC EGPIO support"
	depends on GPIOLIB && ARM
	help
	    This driver supports the CPLD egpio chip present on
	    several HTC phones.  It provides basic support for input
	    pins, output pins, and irqs.

967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
config GPIO_JANZ_TTL
	tristate "Janz VMOD-TTL Digital IO Module"
	depends on MFD_JANZ_CMODIO
	help
	  This enables support for the Janz VMOD-TTL Digital IO module.
	  This driver provides support for driving the pins in output
	  mode only. Input mode is not supported.

config GPIO_KEMPLD
	tristate "Kontron ETX / COMexpress GPIO"
	depends on MFD_KEMPLD
	help
	  This enables support for the PLD GPIO interface on some Kontron ETX
	  and COMexpress (ETXexpress) modules.

	  This driver can also be built as a module. If so, the module will be
	  called gpio-kempld.

config GPIO_LP3943
	tristate "TI/National Semiconductor LP3943 GPIO expander"
	depends on MFD_LP3943
	help
	  GPIO driver for LP3943 MFD.
	  LP3943 can be used as a GPIO expander which provides up to 16 GPIOs.
	  Open drain outputs are required for this usage.

993
994
995
996
997
998
999
1000
config GPIO_LP873X
	tristate "TI LP873X GPO"
	depends on MFD_TI_LP873X
	help
	  This driver supports the GPO on TI Lp873x PMICs. 2 GPOs are present
	  on LP873X PMICs.

	  This driver can also be built as a module. If so, the module will be