Commit 2505c7b0 authored by Eugeniy Paltsev's avatar Eugeniy Paltsev Committed by Linus Walleij
Browse files

GPIO: add single-register GPIO via CREG driver



Add single-register MMIO GPIO driver for complex cases where
only several fields in register belong to GPIO lines and each GPIO
line owns a field with different length and on/off value.

Such CREG GPIOs are used in Synopsys AXS10x and HSDK boards.
Signed-off-by: default avatarEugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 29f55cc6
......@@ -14018,6 +14018,12 @@ S: Supported
F: drivers/reset/reset-axs10x.c
F: Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt
SYNOPSYS CREG GPIO DRIVER
M: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
S: Maintained
F: drivers/gpio/gpio-creg-snps.c
F: Documentation/devicetree/bindings/gpio/snps,creg-gpio.txt
SYNOPSYS DESIGNWARE 8250 UART DRIVER
R: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
S: Maintained
......
......@@ -437,6 +437,16 @@ config GPIO_SIOX
Say yes here to support SIOX I/O devices. These are units connected
via a SIOX bus and have a number of fixed-direction I/O lines.
config GPIO_SNPS_CREG
bool "Synopsys GPIO via CREG (Control REGisters) driver"
depends on ARC || COMPILE_TEST
select OF_GPIO
help
This driver supports GPIOs via CREG on various Synopsys SoCs.
This is a single-register MMIO GPIO driver for complex cases
where only several fields in register belong to GPIO lines and
each GPIO line owns a field with different length and on/off value.
config GPIO_SPEAR_SPICS
bool "ST SPEAr13xx SPI Chip Select as GPIO support"
depends on PLAT_SPEAR
......
......@@ -110,6 +110,7 @@ obj-$(CONFIG_GPIO_REG) += gpio-reg.o
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
obj-$(CONFIG_GPIO_SCH311X) += gpio-sch311x.o
obj-$(CONFIG_GPIO_SNPS_CREG) += gpio-creg-snps.o
obj-$(CONFIG_GPIO_SODAVILLE) += gpio-sodaville.o
obj-$(CONFIG_GPIO_SPEAR_SPICS) += gpio-spear-spics.o
obj-$(CONFIG_GPIO_SPRD) += gpio-sprd.o
......
// SPDX-License-Identifier: GPL-2.0+
//
// Synopsys CREG (Control REGisters) GPIO driver
//
// Copyright (C) 2018 Synopsys
// Author: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
#include <linux/gpio/driver.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#define MAX_GPIO 32
struct creg_layout {
u8 ngpio;
u8 shift[MAX_GPIO];
u8 on[MAX_GPIO];
u8 off[MAX_GPIO];
u8 bit_per_gpio[MAX_GPIO];
};
struct creg_gpio {
struct gpio_chip gc;
void __iomem *regs;
spinlock_t lock;
const struct creg_layout *layout;
};
static void creg_gpio_set(struct gpio_chip *gc, unsigned int offset, int val)
{
struct creg_gpio *hcg = gpiochip_get_data(gc);
const struct creg_layout *layout = hcg->layout;
u32 reg, reg_shift, value;
unsigned long flags;
int i;
value = val ? hcg->layout->on[offset] : hcg->layout->off[offset];
reg_shift = layout->shift[offset];
for (i = 0; i < offset; i++)
reg_shift += layout->bit_per_gpio[i] + layout->shift[i];
spin_lock_irqsave(&hcg->lock, flags);
reg = readl(hcg->regs);
reg &= ~(GENMASK(layout->bit_per_gpio[i] - 1, 0) << reg_shift);
reg |= (value << reg_shift);
writel(reg, hcg->regs);
spin_unlock_irqrestore(&hcg->lock, flags);
}
static int creg_gpio_dir_out(struct gpio_chip *gc, unsigned int offset, int val)
{
creg_gpio_set(gc, offset, val);
return 0;
}
static int creg_gpio_validate_pg(struct device *dev, struct creg_gpio *hcg,
int i)
{
const struct creg_layout *layout = hcg->layout;
if (layout->bit_per_gpio[i] < 1 || layout->bit_per_gpio[i] > 8)
return -EINVAL;
/* Check that on valiue fits it's placeholder */
if (GENMASK(31, layout->bit_per_gpio[i]) & layout->on[i])
return -EINVAL;
/* Check that off valiue fits it's placeholder */
if (GENMASK(31, layout->bit_per_gpio[i]) & layout->off[i])
return -EINVAL;
if (layout->on[i] == layout->off[i])
return -EINVAL;
return 0;
}
static int creg_gpio_validate(struct device *dev, struct creg_gpio *hcg,
u32 ngpios)
{
u32 reg_len = 0;
int i;
if (hcg->layout->ngpio < 1 || hcg->layout->ngpio > MAX_GPIO)
return -EINVAL;
if (ngpios < 1 || ngpios > hcg->layout->ngpio) {
dev_err(dev, "ngpios must be in [1:%u]\n", hcg->layout->ngpio);
return -EINVAL;
}
for (i = 0; i < hcg->layout->ngpio; i++) {
if (creg_gpio_validate_pg(dev, hcg, i))
return -EINVAL;
reg_len += hcg->layout->shift[i] + hcg->layout->bit_per_gpio[i];
}
/* Check that we fit in 32 bit register */
if (reg_len > 32)
return -EINVAL;
return 0;
}
static const struct creg_layout hsdk_cs_ctl = {
.ngpio = 10,
.shift = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
.off = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
.on = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
.bit_per_gpio = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 }
};
static const struct creg_layout axs10x_flsh_cs_ctl = {
.ngpio = 1,
.shift = { 0 },
.off = { 1 },
.on = { 3 },
.bit_per_gpio = { 2 }
};
static const struct of_device_id creg_gpio_ids[] = {
{
.compatible = "snps,creg-gpio-axs10x",
.data = &axs10x_flsh_cs_ctl
}, {
.compatible = "snps,creg-gpio-hsdk",
.data = &hsdk_cs_ctl
}, { /* sentinel */ }
};
static int creg_gpio_probe(struct platform_device *pdev)
{
const struct of_device_id *match;
struct device *dev = &pdev->dev;
struct creg_gpio *hcg;
struct resource *mem;
u32 ngpios;
int ret;
hcg = devm_kzalloc(dev, sizeof(struct creg_gpio), GFP_KERNEL);
if (!hcg)
return -ENOMEM;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
hcg->regs = devm_ioremap_resource(dev, mem);
if (IS_ERR(hcg->regs))
return PTR_ERR(hcg->regs);
match = of_match_node(creg_gpio_ids, pdev->dev.of_node);
hcg->layout = match->data;
if (!hcg->layout)
return -EINVAL;
ret = of_property_read_u32(dev->of_node, "ngpios", &ngpios);
if (ret)
return ret;
ret = creg_gpio_validate(dev, hcg, ngpios);
if (ret)
return ret;
spin_lock_init(&hcg->lock);
hcg->gc.label = dev_name(dev);
hcg->gc.base = -1;
hcg->gc.ngpio = ngpios;
hcg->gc.set = creg_gpio_set;
hcg->gc.direction_output = creg_gpio_dir_out;
hcg->gc.of_node = dev->of_node;
ret = devm_gpiochip_add_data(dev, &hcg->gc, hcg);
if (ret)
return ret;
dev_info(dev, "GPIO controller with %d gpios probed\n", ngpios);
return 0;
}
static struct platform_driver creg_gpio_snps_driver = {
.driver = {
.name = "snps-creg-gpio",
.of_match_table = creg_gpio_ids,
},
.probe = creg_gpio_probe,
};
builtin_platform_driver(creg_gpio_snps_driver);
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment