Commit 495965a1 authored by Heikki Krogerus's avatar Heikki Krogerus Committed by Greg Kroah-Hartman

platform: x86: intel_cht_int33fe: Add connections for the USB Type-C port

Assigning the mux to the USB Type-C port on top of fusb302.
That will prepare this driver for the change in the USB
Type-C class code, where the class driver will assume the
muxes to be always assigned to the ports and not the

Once the USB Type-C class driver has been updated, the
connections between the mux and fusb302 can be dropped.
Acked-by: default avatarAndy Shevchenko <>
Acked-by: default avatarHans de Goede <>
Tested-by: default avatarHans de Goede <>
Signed-off-by: default avatarHeikki Krogerus <>
Signed-off-by: default avatarGreg Kroah-Hartman <>
parent 78d2b54b
...@@ -34,7 +34,7 @@ struct cht_int33fe_data { ...@@ -34,7 +34,7 @@ struct cht_int33fe_data {
struct i2c_client *fusb302; struct i2c_client *fusb302;
struct i2c_client *pi3usb30532; struct i2c_client *pi3usb30532;
/* Contain a list-head must be per device */ /* Contain a list-head must be per device */
struct device_connection connections[5]; struct device_connection connections[8];
}; };
/* /*
...@@ -187,6 +187,16 @@ static int cht_int33fe_probe(struct i2c_client *client) ...@@ -187,6 +187,16 @@ static int cht_int33fe_probe(struct i2c_client *client)
data->connections[3].endpoint[1] = "intel_xhci_usb_sw-role-switch"; data->connections[3].endpoint[1] = "intel_xhci_usb_sw-role-switch";
data->connections[3].id = "usb-role-switch"; data->connections[3].id = "usb-role-switch";
data->connections[4].endpoint[0] = "port0";
data->connections[4].endpoint[1] = "i2c-pi3usb30532";
data->connections[4].id = "typec-switch";
data->connections[5].endpoint[0] = "port0";
data->connections[5].endpoint[1] = "i2c-pi3usb30532";
data->connections[5].id = "typec-mux";
data->connections[6].endpoint[0] = "port0";
data->connections[6].endpoint[1] = "i2c-pi3usb30532";
data->connections[6].id = "idff01m01";
device_connections_add(data->connections); device_connections_add(data->connections);
memset(&board_info, 0, sizeof(board_info)); memset(&board_info, 0, sizeof(board_info));
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment