Commit 67936a41 authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge branch 'i2c/for-current-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "I2C has three driver fixes for the newly introduced drivers and one ID
  addition for the i801 driver"

* 'i2c/for-current-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: i2c-stm32f7: make structure stm32f7_setup static const
  i2c: ensure termination of *_device_id tables
  i2c: i801: Add support for Intel Cedar Fork
  i2c: stm32f7: fix setup structure
parents 031b8140 25f2f440
......@@ -36,6 +36,7 @@ Supported adapters:
* Intel Gemini Lake (SOC)
* Intel Cannon Lake-H (PCH)
* Intel Cannon Lake-LP (PCH)
* Intel Cedar Fork (PCH)
Datasheets: Publicly available at the Intel website
On Intel Patsburg and later chipsets, both the normal host SMBus controller
......
......@@ -131,6 +131,7 @@ config I2C_I801
Gemini Lake (SOC)
Cannon Lake-H (PCH)
Cannon Lake-LP (PCH)
Cedar Fork (PCH)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
......
......@@ -68,6 +68,7 @@
* Gemini Lake (SOC) 0x31d4 32 hard yes yes yes
* Cannon Lake-H (PCH) 0xa323 32 hard yes yes yes
* Cannon Lake-LP (PCH) 0x9da3 32 hard yes yes yes
* Cedar Fork (PCH) 0x18df 32 hard yes yes yes
*
* Features supported by this driver:
* Software PEC no
......@@ -204,6 +205,7 @@
/* Older devices have their ID defined in <linux/pci_ids.h> */
#define PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS 0x0f12
#define PCI_DEVICE_ID_INTEL_CDF_SMBUS 0x18df
#define PCI_DEVICE_ID_INTEL_DNV_SMBUS 0x19df
#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22
#define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS 0x1d22
......@@ -1025,6 +1027,7 @@ static const struct pci_device_id i801_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CDF_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BROXTON_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) },
......@@ -1513,6 +1516,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
case PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS:
case PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS:
case PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS:
case PCI_DEVICE_ID_INTEL_CDF_SMBUS:
case PCI_DEVICE_ID_INTEL_DNV_SMBUS:
case PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS:
priv->features |= FEATURE_I2C_BLOCK_READ;
......
......@@ -627,6 +627,7 @@ static const struct dev_pm_ops sprd_i2c_pm_ops = {
static const struct of_device_id sprd_i2c_of_match[] = {
{ .compatible = "sprd,sc9860-i2c", },
{},
};
static struct platform_driver sprd_i2c_driver = {
......
......@@ -215,7 +215,7 @@ struct stm32f7_i2c_dev {
unsigned int msg_num;
unsigned int msg_id;
struct stm32f7_i2c_msg f7_msg;
struct stm32f7_i2c_setup *setup;
struct stm32f7_i2c_setup setup;
struct stm32f7_i2c_timings timing;
};
......@@ -265,7 +265,7 @@ static struct stm32f7_i2c_spec i2c_specs[] = {
},
};
struct stm32f7_i2c_setup stm32f7_setup = {
static const struct stm32f7_i2c_setup stm32f7_setup = {
.rise_time = STM32F7_I2C_RISE_TIME_DEFAULT,
.fall_time = STM32F7_I2C_FALL_TIME_DEFAULT,
.dnf = STM32F7_I2C_DNF_DEFAULT,
......@@ -537,7 +537,7 @@ static void stm32f7_i2c_hw_config(struct stm32f7_i2c_dev *i2c_dev)
writel_relaxed(timing, i2c_dev->base + STM32F7_I2C_TIMINGR);
/* Enable I2C */
if (i2c_dev->setup->analog_filter)
if (i2c_dev->setup.analog_filter)
stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1,
STM32F7_I2C_CR1_ANFOFF);
else
......@@ -887,22 +887,19 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
}
setup = of_device_get_match_data(&pdev->dev);
i2c_dev->setup->rise_time = setup->rise_time;
i2c_dev->setup->fall_time = setup->fall_time;
i2c_dev->setup->dnf = setup->dnf;
i2c_dev->setup->analog_filter = setup->analog_filter;
i2c_dev->setup = *setup;
ret = device_property_read_u32(i2c_dev->dev, "i2c-scl-rising-time-ns",
&rise_time);
if (!ret)
i2c_dev->setup->rise_time = rise_time;
i2c_dev->setup.rise_time = rise_time;
ret = device_property_read_u32(i2c_dev->dev, "i2c-scl-falling-time-ns",
&fall_time);
if (!ret)
i2c_dev->setup->fall_time = fall_time;
i2c_dev->setup.fall_time = fall_time;
ret = stm32f7_i2c_setup_timing(i2c_dev, i2c_dev->setup);
ret = stm32f7_i2c_setup_timing(i2c_dev, &i2c_dev->setup);
if (ret)
goto clk_free;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment