Commit cb7c6c33 authored by Lianbo Jiang's avatar Lianbo Jiang Committed by Greg Kroah-Hartman
Browse files

scsi: smartpqi: properly set both the DMA mask and the coherent DMA mask

[ Upstream commit 1d94f06e


When SME is enabled, the smartpqi driver won't work on the HP DL385 G10
machine, which causes the failure of kernel boot because it fails to
allocate pqi error buffer. Please refer to the kernel log:
[    9.431749] usbcore: registered new interface driver uas
[    9.441524] Microsemi PQI Driver (v1.1.4-130)
[    9.442956] i40e 0000:04:00.0: fw 6.70.48768 api 1.7 nvm 10.2.5
[    9.447237] smartpqi 0000:23:00.0: Microsemi Smart Family Controller found
         Starting dracut initqueue hook...
[  OK  ] Started Show Plymouth Boot Scre[    9.471654] Broadcom NetXtreme-C/E driver bnxt_en v1.9.1
[  OK  ] Started Forward Password Requests to Plymouth Directory Watch.
[[0;[    9.487108] smartpqi 0000:23:00.0: failed to allocate PQI error buffer
[  139.050544] dracut-initqueue[949]: Warning: dracut-initqueue timeout - starting timeout scripts
[  139.589779] dracut-initqueue[949]: Warning: dracut-initqueue timeout - starting timeout scripts

Basically, the fact that the coherent DMA mask value wasn't set caused the
driver to fall back to SWIOTLB when SME is active.

For correct operation, lets call the dma_set_mask_and_coherent() to
properly set the mask for both streaming and coherent, in order to inform
the kernel about the devices DMA addressing capabilities.
Signed-off-by: default avatarLianbo Jiang <>
Acked-by: default avatarDon Brace <>
Tested-by: default avatarDon Brace <>
Signed-off-by: default avatarMartin K. Petersen <>
Signed-off-by: default avatarSasha Levin <>
parent 214c5933
......@@ -6378,7 +6378,7 @@ static int pqi_pci_init(struct pqi_ctrl_info *ctrl_info)
mask = DMA_BIT_MASK(32);
rc = dma_set_mask(&ctrl_info->pci_dev->dev, mask);
rc = dma_set_mask_and_coherent(&ctrl_info->pci_dev->dev, mask);
if (rc) {
dev_err(&ctrl_info->pci_dev->dev, "failed to set DMA mask\n");
goto disable_device;
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment