Skip to content

GitLab

Switch branch/tag
  1. 20 May, 2015 2 commits
  3. 11 Aug, 2014 2 commits
  5. 19 May, 2012 1 commit
  7. 26 Feb, 2012 1 commit
  9. 27 Feb, 2009 1 commit
    • Ramachandra K's avatar
      IB/mad: Fix RMPP header RRespTime manipulation · 7020cb0f
      Ramachandra K authored 
      

Fix ib_set_rmpp_flags() to use the correct bit mask for RRespTime.  In
the 8-bit field of the RMPP header, the first 5 bits are RRespTime and
next 3 bits are RMPPFlags. Hence to retain the first 5 bits, the mask
should be 0xF8 instead of 0xF1.

ack_recv()-->format_ack() calls ib_set_rmpp_flags() and due to the
incorrect ANDing with 0xF1, RRespTime got changed incorrectly and RMPP
Acks sent back always had a RRespTime of 0x1E (30) which caused the
other end to consider the time outs to be approximately 4297 seconds
(i.e. in the order of 4*2^30) instead of the usual ~4 seconds (order
of 4*2^20).
Signed-off-by: default avatarRamachandra K <ramachandra.kuchimanchi@qlogic.com>
Acked-by: default avatarSean Hefty <sean.hefty@intel.com>
Signed-off-by: default avatarRoland Dreier <rolandd@cisco.com>
      7020cb0f
  11. 18 Jan, 2009 1 commit
  13. 15 Jul, 2008 1 commit
  15. 25 Jan, 2008 1 commit
  17. 03 Aug, 2007 1 commit
  19. 11 Jul, 2007 1 commit
    • Sean Hefty's avatar
      IB/sa: Make sure SA queries use default P_Key · 2aec5c60
      Sean Hefty authored 
      

MADs sent to the SA should use the the default P_Key (0x7fff/0xffff).
There's no requirement that the default P_Key is stored at index 0 in
the local P_Key table, so add code to the sa_query module to look up
the index of the default P_Key when creating an address handle for the
SA (which is done any time the P_Key table might change), and use this
index for all SA queries.
Signed-off-by: default avatarSean Hefty <sean.hefty@intel.com>
Signed-off-by: default avatarRoland Dreier <rolandd@cisco.com>
      2aec5c60
  21. 03 May, 2007 1 commit
    • Jean Delvare's avatar
      PCI: Cleanup the includes of <linux/pci.h> · 6473d160
      Jean Delvare authored 
      I noticed that many source files include <linux/pci.h> while they do
not appear to need it. Here is an attempt to clean it all up.

In order to find all possibly affected files, I searched for all
files including <linux/pci.h> but without any other occurence of "pci"
or "PCI". I removed the include statement from all of these, then I
compiled an allmodconfig kernel on both i386 and x86_64 and fixed the
false positives manually.

My tests covered 66% of the affected files, so there could be false
positives remaining. Untested files are:

arch/alpha/kernel/err_common.c
arch/alpha/kernel/err_ev6.c
arch/alpha/kernel/err_ev7.c
arch/ia64/sn/kernel/huberror.c
arch/ia64/sn/kernel/xpnet.c
arch/m68knommu/kernel/dma.c
arch/mips/lib/iomap.c
arch/powerpc/platforms/pseries/ras.c
arch/ppc/8260_io/enet.c
arch/ppc/8260_io/fcc_enet.c
arch/ppc/8xx_io/enet.c
arch/ppc/syslib/ppc4xx_sgdma.c
arch/sh64/mach-cayman/iomap.c
arch/xtensa/kernel/xtensa_ksyms.c
arch/xtensa/platform-iss/setup.c
drivers/i2c/busses/i2c-at91.c
drivers/i2c/busses/i2c-mpc.c
drivers/media/video/saa711x.c
drivers/misc/hdpuftrs/hdpu_cpustate.c
drivers/misc/hdpuftrs/hdpu_nexus.c
drivers/net/au1000_eth.c
drivers/net/fec_8xx/fec_main.c
drivers/net/fec_8xx/fec_mii.c
drivers/net/fs_enet/fs_enet-main.c
drivers/net/fs_enet/mac-fcc.c
drivers/net/fs_enet/mac-fec.c
drivers/net/fs_enet/mac-scc.c
drivers/net/fs_enet/mii-bitbang.c
drivers/net/fs_enet/mii-fec.c
drivers/net/ibm_emac/ibm_emac_core.c
drivers/net/lasi_82596.c
drivers/parisc/hppb.c
drivers/sbus/sbus.c
drivers/video/g364fb.c
drivers/video/platinumfb.c
drivers/video/stifb.c
drivers/video/valkyriefb.c
include/asm-arm/arch-ixp4xx/dma.h
sound/oss/au1550_ac97.c

I would welcome test reports for these files. I am fine with removing
the untested files from the patch if the general opinion is that these
changes aren't safe. The tested part would still be nice to have.

Note that this patch depends on another header fixup patch I submitted
to LKML yesterday:
  [PATCH] scatterlist.h needs types.h
  http://lkml.org/lkml/2007/3/01/141

Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      6473d160
  23. 24 Jul, 2006 1 commit
  25. 30 Mar, 2006 1 commit
  27. 20 Mar, 2006 1 commit
    • Jack Morgenstein's avatar
      IB/umad: Add support for large RMPP transfers · f36e1793
      Jack Morgenstein authored 
      

Add support for sending and receiving large RMPP transfers.  The old
code supports transfers only as large as a single contiguous kernel
memory allocation.  This patch uses linked list of memory buffers when
sending and receiving data to avoid needing contiguous pages for
larger transfers.

  Receive side: copy the arriving MADs in chunks instead of coalescing
  to one large buffer in kernel space.

  Send side: split a multipacket MAD buffer to a list of segments,
  (multipacket_list) and send these using a gather list of size 2.
  Also, save pointer to last sent segment, and retrieve requested
  segments by walking list starting at last sent segment. Finally,
  save pointer to last-acked segment.  When retrying, retrieve
  segments for resending relative to this pointer.  When updating last
  ack, start at this pointer.
Signed-off-by: default avatarJack Morgenstein <jackm@mellanox.co.il>
Signed-off-by: default avatarSean Hefty <sean.hefty@intel.com>
Signed-off-by: default avatarRoland Dreier <rolandd@cisco.com>
      f36e1793
  29. 25 Oct, 2005 1 commit
    • Sean Hefty's avatar
      [IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped · 34816ad9
      Sean Hefty authored 
      

The MAD layer was violating the DMA API by touching data buffers used
for sends after the DMA mapping was done.  This causes problems on
non-cache-coherent architectures, because the device doing DMA won't
see updates to the payload buffers that exist only in the CPU cache.

Fix this by having all MAD consumers use ib_create_send_mad() to
allocate their send buffers, and moving the DMA mapping into the MAD
layer so it can be done just before calling send (and after any
modifications of the send buffer by the MAD layer).

Tested on a non-cache-coherent PowerPC 440SPe system.
Signed-off-by: default avatarSean Hefty <sean.hefty@intel.com>
Signed-off-by: default avatarRoland Dreier <rolandd@cisco.com>
      34816ad9
  31. 08 Oct, 2005 1 commit
  33. 21 Sep, 2005 1 commit
  35. 09 Sep, 2005 1 commit
  37. 27 Aug, 2005 3 commits
  39. 27 Jul, 2005 6 commits
  41. 16 Apr, 2005 1 commit
    • Linus Torvalds's avatar
      Linux-2.6.12-rc2 · 1da177e4
      Linus Torvalds authored 
      Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
      1da177e4

Imprint & Privacy Policy