Commit 35d1efe8 authored by Masanari Iida's avatar Masanari Iida Committed by Nicholas Bellinger
Browse files

target: Fix minor spelling typos in drivers/target



Correct spelling typo in printk and comment within drivers/target.
Signed-off-by: default avatarMasanari Iida <standby24x7@gmail.com>
Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
parent 9c58b7dd
......@@ -344,7 +344,7 @@ int target_emulate_set_target_port_groups(struct se_cmd *cmd)
*/
rtpi = get_unaligned_be16(ptr + 2);
/*
* Locate the matching relative target port identifer
* Locate the matching relative target port identifier
* for the struct se_device storage object.
*/
spin_lock(&dev->se_port_lock);
......
......@@ -1200,7 +1200,7 @@ static ssize_t target_core_dev_pr_show_attr_res_pr_holder_tg_port(
" Target Node Endpoint: %s\n", tfo->get_fabric_name(),
tfo->tpg_get_wwn(se_tpg));
len += sprintf(page+len, "SPC-3 Reservation: Relative Port"
" Identifer Tag: %hu %s Portal Group Tag: %hu"
" Identifier Tag: %hu %s Portal Group Tag: %hu"
" %s Logical Unit: %u\n", lun->lun_sep->sep_rtpi,
tfo->get_fabric_name(), tfo->tpg_get_tag(se_tpg),
tfo->get_fabric_name(), lun->unpacked_lun);
......
......@@ -531,7 +531,7 @@ static struct se_port *core_alloc_port(struct se_device *dev)
}
again:
/*
* Allocate the next RELATIVE TARGET PORT IDENTIFER for this struct se_device
* Allocate the next RELATIVE TARGET PORT IDENTIFIER for this struct se_device
* Here is the table from spc4r17 section 7.7.3.8.
*
* Table 473 -- RELATIVE TARGET PORT IDENTIFIER field
......@@ -548,7 +548,7 @@ static struct se_port *core_alloc_port(struct se_device *dev)
list_for_each_entry(port_tmp, &dev->dev_sep_list, sep_list) {
/*
* Make sure RELATIVE TARGET PORT IDENTIFER is unique
* Make sure RELATIVE TARGET PORT IDENTIFIER is unique
* for 16-bit wrap..
*/
if (port->sep_rtpi == port_tmp->sep_rtpi)
......@@ -595,7 +595,7 @@ static void core_export_port(
}
dev->dev_port_count++;
port->sep_index = port->sep_rtpi; /* RELATIVE TARGET PORT IDENTIFER */
port->sep_index = port->sep_rtpi; /* RELATIVE TARGET PORT IDENTIFIER */
}
/*
......
......@@ -338,7 +338,7 @@ u32 iscsi_get_pr_transport_id_len(
* 00b: iSCSI Initiator device TransportID format
*/
if (pr_reg->isid_present_at_reg) {
len += 5; /* For ",i,0x" ASCII seperator */
len += 5; /* For ",i,0x" ASCII separator */
len += 7; /* For iSCSI Initiator Session ID + Null terminator */
*format_code = 1;
} else
......@@ -415,20 +415,20 @@ char *iscsi_parse_pr_out_transport_id(
*out_tid_len = (add_len + 4);
}
/*
* Check for ',i,0x' seperator between iSCSI Name and iSCSI Initiator
* Check for ',i,0x' separator between iSCSI Name and iSCSI Initiator
* Session ID as defined in Table 390 - iSCSI initiator port TransportID
* format.
*/
if (format_code == 0x40) {
p = strstr(&buf[4], ",i,0x");
if (!p) {
pr_err("Unable to locate \",i,0x\" seperator"
pr_err("Unable to locate \",i,0x\" separator"
" for Initiator port identifier: %s\n",
&buf[4]);
return NULL;
}
*p = '\0'; /* Terminate iSCSI Name */
p += 5; /* Skip over ",i,0x" seperator */
p += 5; /* Skip over ",i,0x" separator */
*port_nexus_ptr = p;
/*
......
......@@ -1620,7 +1620,7 @@ static int core_scsi3_decode_spec_i_port(
goto out;
}
/*
* Locate the desination initiator ACL to be registered
* Locate the destination initiator ACL to be registered
* from the decoded fabric module specific TransportID
* at *i_str.
*/
......@@ -4257,7 +4257,7 @@ static int core_scsi3_pri_read_full_status(struct se_cmd *cmd)
buf[off++] = ((port->sep_rtpi >> 8) & 0xff);
buf[off++] = (port->sep_rtpi & 0xff);
} else
off += 2; /* Skip over RELATIVE TARGET PORT IDENTIFER */
off += 2; /* Skip over RELATIVE TARGET PORT IDENTIFIER */
/*
* Now, have the $FABRIC_MOD fill in the protocol identifier
......
......@@ -264,7 +264,7 @@ pscsi_get_inquiry_vpd_device_ident(struct scsi_device *sdev,
" length zero!\n");
break;
}
pr_debug("T10 VPD Identifer Length: %d\n", ident_len);
pr_debug("T10 VPD Identifier Length: %d\n", ident_len);
vpd = kzalloc(sizeof(struct t10_vpd), GFP_KERNEL);
if (!vpd) {
......
......@@ -303,7 +303,7 @@ struct se_node_acl *core_tpg_check_initiator_node_acl(
}
/*
* Here we only create demo-mode MappedLUNs from the active
* TPG LUNs if the fabric is not explictly asking for
* TPG LUNs if the fabric is not explicitly asking for
* tpg_check_demo_mode_login_only() == 1.
*/
if ((tpg->se_tpg_tfo->tpg_check_demo_mode_login_only == NULL) ||
......
......@@ -958,7 +958,7 @@ int
transport_set_vpd_ident(struct t10_vpd *vpd, unsigned char *page_83)
{
static const char hex_str[] = "0123456789abcdef";
int j = 0, i = 4; /* offset to start of the identifer */
int j = 0, i = 4; /* offset to start of the identifier */
/*
* The VPD Code Set (encoding)
......@@ -2760,7 +2760,7 @@ bool transport_wait_for_tasks(struct se_cmd *cmd)
spin_lock_irqsave(&cmd->t_state_lock, flags);
cmd->transport_state &= ~(CMD_T_ACTIVE | CMD_T_STOP);
pr_debug("wait_for_tasks: Stopped wait_for_compltion("
pr_debug("wait_for_tasks: Stopped wait_for_completion("
"&cmd->t_transport_stop_comp) for ITT: 0x%08x\n",
cmd->se_tfo->get_task_tag(cmd));
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment