Commit 3fe89d2e authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge tag 'fixes-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Since we didn't get around to collect fixes in time for -rc2 over the
  easter vacation, this one is unfortunately a bit larger than we'd like
  for an -rc3 merge.

  A large set of the changes is in the device tree sources, so I'm
  splitting out the description between code changes and DT changes.
  Aside from omap and versatile express, the actual code bugs are and
  trivial.  Here is an overview:

  imx:
   - fix video clock settings
   - fix one clock refcounting bug

  omap:
   - update defconfig for renamed USB PHY driver
   - fix error handling in gpmc
   - fix N900 video initialization regression
   - fix reression in hwmod code from missing braces
   - fix am43xx and omap3 clocks
   - remove bogus write to voltage control register

  pxa:
   - fix build regression from 3.13 header cleanup

  rockchip:
   - fix a misleading printk string

  shmobile:
   - fix incorrect sound setting on multiple machines

  spear:
   - remove incorrect __init section annotation

  tegra:
   - remove a stale Kconfig entry

  u300:
   - update defconfig

  ux500:
   - enable common wireless and sensor drivers in defconfig
   - more defconfig updates

  vexpress:
   - fix voltage calculation for opp
   - fix reboot hang and warning
   - fix out-of-bounds array access
   - improve error handling in clock driver

  overall:
   - always select CLKSRC_OF in multiplatform builds

  And these are the devicetree related changes:

  imx:
   - add missing #clock-cell properties
   - fix pinctrl setting in imx6sl-evk
   - fix video endpoint on imx53
   - remove obsolete lvds-channel nodes (multiple patches)
   - add missing second stmpe node
   - fix usb host mode on dmo-edmqmx6 (multiple patches)
   - fix gic node #address-cells to match usage
   - add missing legacy IRQ map for PCIe
   - fix microsom pincontrol setting for rgmii
   - fix fatal typo in touchscreen DT usage for mx5
   - list all RAM present on m53evk and mx53qsb

  omap:
   - fix bug in DT handling of gpmc external bus
   - add DT for older revision of beagleboard
   - fix regression after DT node name fixes
   - remove obsolete properties for gpmc
   - fix pinmux comment to match DT it refers to
   - fix newly added dra7xx clock node data
   - add missing clock for USB PHY

  mvebu:
   - add missing clock for mdio node
   - fix nonstandard vendor prefixes on i2c nodes

  rockchip:
   - fix pin control setting for uart

  shmobile:
   - fix typo in DT data for pin control (multiple patches)
   - fix gic node #address-cells to match usage

  tegra:
   - fix clock and uart DT representation to match hardware

  zynq:
   - add DT nodes for newly added driver
   - add DT properties required for cpufreq-ondemand

  overall:
   - restore alphabetic order in Makefile
   - grammar fixes in bindings"

* tag 'fixes-3.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (66 commits)
  ARM: vexpress/TC2: Convert OPP voltage to uV before storing
  power/reset: vexpress: Fix restart/power off operation
  dt: tegra: remove non-existent clock IDs
  clk: tegra: remove non-existent clocks
  ARM: tegra: remove UART5/UARTE from tegra124.dtsi
  ARM: tegra: remove TEGRA_EMC_SCALING_ENABLE
  ARM: Tidy up DTB Makefile entries
  ARM: fix missing CLKSRC_OF on multi-platform
  ARM: spear: add __init to spear_clocksource_init()
  ARM: pxa: hx4700.h: include "irqs.h" for PXA_NR_BUILTIN_GPIO
  arm/mach-vexpress: array accessed out of bounds
  clk: vexpress: NULL dereference on error path
  ARM: OMAP2+: Fix GPMC remap for devices using an offset
  ARM: zynq: dt: Add I2C nodes to Zynq device tree
  ARM: zynq: DT: Add 'clock-latency' property
  ARM: OMAP2+: Fix oops for GPMC free
  ARM: dts: Add support for the BeagleBoard xM A/B
  ARM: dts: Grammar /that will/it will/
  ARM: dts: Grammar /is uses/ is used/
  ARM: OMAP2+: Fix config name for USB3 PHY
  ...
parents 625bba66 76e7745e
......@@ -311,6 +311,7 @@ config ARCH_MULTIPLATFORM
select ARM_HAS_SG_CHAIN
select ARM_PATCH_PHYS_VIRT
select AUTO_ZRELADDR
select CLKSRC_OF
select COMMON_CLK
select GENERIC_CLOCKEVENTS
select MULTI_IRQ_HANDLER
......
......@@ -51,10 +51,9 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d36ek.dtb
dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
bcm21664-garnet.dtb
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
dtb-$(CONFIG_ARCH_BERLIN) += \
berlin2-sony-nsz-gs7.dtb \
berlin2cd-google-chromecast.dtb
......@@ -246,6 +245,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
omap3-sbc-t3730.dtb \
omap3-devkit8000.dtb \
omap3-beagle-xm.dtb \
omap3-beagle-xm-ab.dtb \
omap3-evm.dtb \
omap3-evm-37xx.dtb \
omap3-ldp.dtb \
......@@ -294,13 +294,6 @@ dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
qcom-apq8074-dragonboard.dtb
dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
ste-hrefprev60-stuib.dtb \
ste-hrefprev60-tvk.dtb \
ste-hrefv60plus-stuib.dtb \
ste-hrefv60plus-tvk.dtb \
ste-ccu8540.dtb \
ste-ccu9540.dtb
dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \
s3c6410-smdk6410.dtb
......@@ -369,9 +362,16 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
tegra30-cardhu-a04.dtb \
tegra114-dalmore.dtb \
tegra124-venice2.dtb
dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb
dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
ste-hrefprev60-stuib.dtb \
ste-hrefprev60-tvk.dtb \
ste-hrefv60plus-stuib.dtb \
ste-hrefv60plus-tvk.dtb \
ste-ccu8540.dtb \
ste-ccu9540.dtb
dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \
versatile-pb.dtb
dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
vexpress-v2p-ca9.dtb \
vexpress-v2p-ca15-tc1.dtb \
......
......@@ -183,7 +183,7 @@
&usb {
status = "okay";
control@44e10000 {
control@44e10620 {
status = "okay";
};
......@@ -204,7 +204,7 @@
dr_mode = "host";
};
dma-controller@07402000 {
dma-controller@47402000 {
status = "okay";
};
};
......
......@@ -301,8 +301,8 @@
am335x_evm_audio_pins: am335x_evm_audio_pins {
pinctrl-single,pins = <
0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rx_dv.mcasp1_aclkx */
0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_txd3.mcasp1_fsx */
0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
>;
......@@ -331,7 +331,7 @@
&usb {
status = "okay";
control@44e10000 {
control@44e10620 {
status = "okay";
};
......@@ -352,7 +352,7 @@
dr_mode = "host";
};
dma-controller@07402000 {
dma-controller@47402000 {
status = "okay";
};
};
......
......@@ -364,7 +364,7 @@
&usb {
status = "okay";
control@44e10000 {
control@44e10620 {
status = "okay";
};
......@@ -385,7 +385,7 @@
dr_mode = "host";
};
dma-controller@07402000 {
dma-controller@47402000 {
status = "okay";
};
};
......
......@@ -118,7 +118,6 @@
reg = <0 0 0>; /* CS0, offset 0 */
nand-bus-width = <8>;
ti,nand-ecc-opt = "bch8";
gpmc,device-nand = "true";
gpmc,device-width = <1>;
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
......@@ -202,7 +201,7 @@
&usb {
status = "okay";
control@44e10000 {
control@44e10620 {
status = "okay";
};
......@@ -223,7 +222,7 @@
dr_mode = "host";
};
dma-controller@07402000 {
dma-controller@47402000 {
status = "okay";
};
};
......
......@@ -72,7 +72,7 @@
};
/*
* The soc node represents the soc top level view. It is uses for IPs
* The soc node represents the soc top level view. It is used for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
*/
soc {
......@@ -94,8 +94,8 @@
/*
* XXX: Use a flat representation of the AM33XX interconnect.
* The real AM33XX interconnect network is quite complex.Since
* that will not bring real advantage to represent that in DT
* The real AM33XX interconnect network is quite complex. Since
* it will not bring real advantage to represent that in DT
* for the moment, just use a fake OCP bus entry to represent
* the whole bus hierarchy.
*/
......
......@@ -230,6 +230,7 @@
#size-cells = <0>;
compatible = "marvell,orion-mdio";
reg = <0x72004 0x4>;
clocks = <&gateclk 4>;
};
eth1: ethernet@74000 {
......
......@@ -336,6 +336,7 @@
#size-cells = <0>;
compatible = "marvell,orion-mdio";
reg = <0x72004 0x4>;
clocks = <&gateclk 4>;
};
coredivclk: clock@e4250 {
......
......@@ -80,7 +80,7 @@
};
/*
* The soc node represents the soc top level view. It is uses for IPs
* The soc node represents the soc top level view. It is used for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
*/
soc {
......@@ -94,7 +94,7 @@
/*
* XXX: Use a flat representation of the SOC interconnect.
* The real OMAP interconnect network is quite complex.
* Since that will not bring real advantage to represent that in DT for
* Since it will not bring real advantage to represent that in DT for
* the moment, just use a fake OCP bus entry to represent the whole bus
* hierarchy.
*/
......
......@@ -1640,7 +1640,7 @@
#clock-cells = <0>;
compatible = "ti,mux-clock";
clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
ti,bit-shift = <28>;
ti,bit-shift = <24>;
reg = <0x1860>;
};
......
......@@ -56,6 +56,7 @@
osc {
compatible = "fsl,imx-osc", "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
};
};
......
......@@ -29,6 +29,7 @@
osc26m {
compatible = "fsl,imx-osc26m", "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
};
......
......@@ -48,6 +48,7 @@
osc26m {
compatible = "fsl,imx-osc26m", "fixed-clock";
#clock-cells = <0>;
clock-frequency = <26000000>;
};
};
......
......@@ -53,21 +53,25 @@
ckil {
compatible = "fsl,imx-ckil", "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
ckih1 {
compatible = "fsl,imx-ckih1", "fixed-clock";
#clock-cells = <0>;
clock-frequency = <22579200>;
};
ckih2 {
compatible = "fsl,imx-ckih2", "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
osc {
compatible = "fsl,imx-osc", "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
};
};
......
......@@ -50,21 +50,25 @@
ckil {
compatible = "fsl,imx-ckil", "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
ckih1 {
compatible = "fsl,imx-ckih1", "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
ckih2 {
compatible = "fsl,imx-ckih2", "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
osc {
compatible = "fsl,imx-osc", "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
};
};
......
......@@ -17,7 +17,8 @@
compatible = "denx,imx53-m53evk", "fsl,imx53";
memory {
reg = <0x70000000 0x20000000>;
reg = <0x70000000 0x20000000>,
<0xb0000000 0x20000000>;
};
soc {
......@@ -193,17 +194,17 @@
irq-trigger = <0x1>;
stmpe_touchscreen {
compatible = "stmpe,ts";
compatible = "st,stmpe-ts";
reg = <0>;
ts,sample-time = <4>;
ts,mod-12b = <1>;
ts,ref-sel = <0>;
ts,adc-freq = <1>;
ts,ave-ctrl = <3>;
ts,touch-det-delay = <3>;
ts,settling = <4>;
ts,fraction-z = <7>;
ts,i-drive = <1>;
st,sample-time = <4>;
st,mod-12b = <1>;
st,ref-sel = <0>;
st,adc-freq = <1>;
st,ave-ctrl = <3>;
st,touch-det-delay = <3>;
st,settling = <4>;
st,fraction-z = <7>;
st,i-drive = <1>;
};
};
......
......@@ -14,7 +14,8 @@
/ {
memory {
reg = <0x70000000 0x40000000>;
reg = <0x70000000 0x20000000>,
<0xb0000000 0x20000000>;
};
display0: display@di0 {
......
......@@ -25,12 +25,17 @@
soc {
display: display@di0 {
compatible = "fsl,imx-parallel-display";
crtcs = <&ipu 0>;
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rgb24_vga1>;
status = "okay";
port {
display0_in: endpoint {
remote-endpoint = <&ipu_di0_disp0>;
};
};
display-timings {
VGA {
clock-frequency = <25200000>;
......@@ -293,6 +298,10 @@
};
};
&ipu_di0_disp0 {
remote-endpoint = <&display0_in>;
};
&kpp {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_kpp>;
......
......@@ -70,21 +70,25 @@
ckil {
compatible = "fsl,imx-ckil", "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
ckih1 {
compatible = "fsl,imx-ckih1", "fixed-clock";
#clock-cells = <0>;
clock-frequency = <22579200>;
};
ckih2 {
compatible = "fsl,imx-ckih2", "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
osc {
compatible = "fsl,imx-osc", "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
};
};
......@@ -430,7 +434,7 @@
port {
lvds1_in: endpoint {
remote-endpoint = <&ipu_di0_lvds0>;
remote-endpoint = <&ipu_di1_lvds1>;
};
};
};
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment