Commit 410ca5c7 authored by Matthew Wilcox's avatar Matthew Wilcox Committed by James Bottomley
Browse files

[SCSI] Move scsi_print_msg to SPI class



scsi_print_msg() is an SPI-specific concept.  This patch moves it from
constants.c to scsi_transport_spi.c and updates the Kconfig to link in
the SPI class for the drivers which use scsi_print_msg().
Signed-off-by: default avatarMatthew Wilcox <matthew@wil.cx>
Signed-off-by: default avatarJames Bottomley <James.Bottomley@SteelEye.com>
parent 7b16318d
......@@ -336,6 +336,7 @@ config SCSI_ACARD
config SCSI_AHA152X
tristate "Adaptec AHA152X/2825 support"
depends on ISA && SCSI && !64BIT
select SCSI_SPI_ATTRS
---help---
This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
SCSI host adapters. It also works for the AVA-1505, but the IRQ etc.
......@@ -623,6 +624,7 @@ config SCSI_OMIT_FLASHPOINT
config SCSI_DMX3191D
tristate "DMX3191D SCSI support"
depends on PCI && SCSI
select SCSI_SPI_ATTRS
help
This is support for Domex DMX3191D SCSI Host Adapters.
......@@ -632,6 +634,7 @@ config SCSI_DMX3191D
config SCSI_DTC3280
tristate "DTC3180/3280 SCSI support"
depends on ISA && SCSI
select SCSI_SPI_ATTRS
help
This is support for DTC 3180/3280 SCSI Host Adapters. Please read
the SCSI-HOWTO, available from
......@@ -752,6 +755,7 @@ config SCSI_GDTH
config SCSI_GENERIC_NCR5380
tristate "Generic NCR5380/53c400 SCSI PIO support"
depends on ISA && SCSI
select SCSI_SPI_ATTRS
---help---
This is a driver for the old NCR 53c80 series of SCSI controllers
on boards using PIO. Most boards such as the Trantor T130 fit this
......@@ -771,6 +775,7 @@ config SCSI_GENERIC_NCR5380
config SCSI_GENERIC_NCR5380_MMIO
tristate "Generic NCR5380/53c400 SCSI MMIO support"
depends on ISA && SCSI
select SCSI_SPI_ATTRS
---help---
This is a driver for the old NCR 53c80 series of SCSI controllers
on boards using memory mapped I/O.
......@@ -1254,6 +1259,7 @@ config SCSI_MCA_53C9X
config SCSI_PAS16
tristate "PAS16 SCSI support"
depends on ISA && SCSI
select SCSI_SPI_ATTRS
---help---
This is support for a SCSI host adapter. It is explained in section
3.10 of the SCSI-HOWTO, available from
......@@ -1423,6 +1429,7 @@ config SCSI_DC390T
config SCSI_T128
tristate "Trantor T128/T128F/T228 SCSI support"
depends on ISA && SCSI
select SCSI_SPI_ATTRS
---help---
This is support for a SCSI host adapter. It is explained in section
3.11 of the SCSI-HOWTO, available from
......@@ -1681,6 +1688,7 @@ config OKTAGON_SCSI
config ATARI_SCSI
tristate "Atari native SCSI support"
depends on ATARI && SCSI && BROKEN
select SCSI_SPI_ATTRS
---help---
If you have an Atari with built-in NCR5380 SCSI controller (TT,
Falcon, ...) say Y to get it supported. Of course also, if you have
......@@ -1722,6 +1730,7 @@ config TT_DMA_EMUL
config MAC_SCSI
bool "Macintosh NCR5380 SCSI"
depends on MAC && SCSI=y
select SCSI_SPI_ATTRS
help
This is the NCR 5380 SCSI controller included on most of the 68030
based Macintoshes. If you have one of these say Y and read the
......@@ -1743,6 +1752,7 @@ config SCSI_MAC_ESP
config MVME147_SCSI
bool "WD33C93 SCSI driver for MVME147"
depends on MVME147 && SCSI=y
select SCSI_SPI_ATTRS
help
Support for the on-board SCSI controller on the Motorola MVME147
single-board computer.
......@@ -1750,6 +1760,7 @@ config MVME147_SCSI
config MVME16x_SCSI
bool "NCR53C710 SCSI driver for MVME16x"
depends on MVME16x && SCSI && BROKEN
select SCSI_SPI_ATTRS
help
The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710
SCSI controller chip. Almost everyone using one of these boards
......@@ -1758,6 +1769,7 @@ config MVME16x_SCSI
config BVME6000_SCSI
bool "NCR53C710 SCSI driver for BVME6000"
depends on BVME6000 && SCSI && BROKEN
select SCSI_SPI_ATTRS
help
The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710
SCSI controller chip. Almost everyone using one of these boards
......@@ -1774,6 +1786,7 @@ config SCSI_NCR53C7xx_FAST
config SUN3_SCSI
tristate "Sun3 NCR5380 SCSI"
depends on SUN3 && SCSI && BROKEN
select SCSI_SPI_ATTRS
help
This option will enable support for the OBIO (onboard io) NCR5380
SCSI controller found in the Sun 3/50 and 3/60, as well as for
......
......@@ -4,6 +4,7 @@
config SCSI_ACORNSCSI_3
tristate "Acorn SCSI card (aka30) support"
depends on ARCH_ACORN && SCSI && BROKEN
select SCSI_SPI_ATTRS
help
This enables support for the Acorn SCSI card (aka30). If you have an
Acorn system with one of these, say Y. If unsure, say N.
......
......@@ -1278,114 +1278,6 @@ void scsi_print_req_sense(const char *devclass, struct scsi_request *sreq)
}
EXPORT_SYMBOL(scsi_print_req_sense);
#ifdef CONFIG_SCSI_CONSTANTS
static const char * const one_byte_msgs[] = {
/* 0x00 */ "Command Complete", NULL, "Save Pointers",
/* 0x03 */ "Restore Pointers", "Disconnect", "Initiator Error",
/* 0x06 */ "Abort", "Message Reject", "Nop", "Message Parity Error",
/* 0x0a */ "Linked Command Complete", "Linked Command Complete w/flag",
/* 0x0c */ "Bus device reset", "Abort Tag", "Clear Queue",
/* 0x0f */ "Initiate Recovery", "Release Recovery"
};
#define NO_ONE_BYTE_MSGS (sizeof(one_byte_msgs) / sizeof (const char *))
static const char * const two_byte_msgs[] = {
/* 0x20 */ "Simple Queue Tag", "Head of Queue Tag", "Ordered Queue Tag"
/* 0x23 */ "Ignore Wide Residue"
};
#define NO_TWO_BYTE_MSGS (sizeof(two_byte_msgs) / sizeof (const char *))
static const char * const extended_msgs[] = {
/* 0x00 */ "Modify Data Pointer", "Synchronous Data Transfer Request",
/* 0x02 */ "SCSI-I Extended Identify", "Wide Data Transfer Request"
};
#define NO_EXTENDED_MSGS (sizeof(two_byte_msgs) / sizeof (const char *))
int scsi_print_msg (const unsigned char *msg)
{
int len = 0, i;
if (msg[0] == EXTENDED_MESSAGE) {
len = 3 + msg[1];
if (msg[2] < NO_EXTENDED_MSGS)
printk ("%s ", extended_msgs[msg[2]]);
else
printk ("Extended Message, reserved code (0x%02x) ",
(int) msg[2]);
switch (msg[2]) {
case EXTENDED_MODIFY_DATA_POINTER:
printk("pointer = %d", (int) (msg[3] << 24) |
(msg[4] << 16) | (msg[5] << 8) | msg[6]);
break;
case EXTENDED_SDTR:
printk("period = %d ns, offset = %d",
(int) msg[3] * 4, (int) msg[4]);
break;
case EXTENDED_WDTR:
printk("width = 2^%d bytes", msg[3]);
break;
default:
for (i = 2; i < len; ++i)
printk("%02x ", msg[i]);
}
/* Identify */
} else if (msg[0] & 0x80) {
printk("Identify disconnect %sallowed %s %d ",
(msg[0] & 0x40) ? "" : "not ",
(msg[0] & 0x20) ? "target routine" : "lun",
msg[0] & 0x7);
len = 1;
/* Normal One byte */
} else if (msg[0] < 0x1f) {
if (msg[0] < NO_ONE_BYTE_MSGS)
printk(one_byte_msgs[msg[0]]);
else
printk("reserved (%02x) ", msg[0]);
len = 1;
/* Two byte */
} else if (msg[0] <= 0x2f) {
if ((msg[0] - 0x20) < NO_TWO_BYTE_MSGS)
printk("%s %02x ", two_byte_msgs[msg[0] - 0x20],
msg[1]);
else
printk("reserved two byte (%02x %02x) ",
msg[0], msg[1]);
len = 2;
} else
printk("reserved");
return len;
}
EXPORT_SYMBOL(scsi_print_msg);
#else /* ifndef CONFIG_SCSI_CONSTANTS */
int scsi_print_msg (const unsigned char *msg)
{
int len = 0, i;
if (msg[0] == EXTENDED_MESSAGE) {
len = 3 + msg[1];
for (i = 0; i < len; ++i)
printk("%02x ", msg[i]);
/* Identify */
} else if (msg[0] & 0x80) {
printk("%02x ", msg[0]);
len = 1;
/* Normal One byte */
} else if (msg[0] < 0x1f) {
printk("%02x ", msg[0]);
len = 1;
/* Two byte */
} else if (msg[0] <= 0x2f) {
printk("%02x %02x", msg[0], msg[1]);
len = 2;
} else
printk("%02x ", msg[0]);
return len;
}
EXPORT_SYMBOL(scsi_print_msg);
#endif /* ! CONFIG_SCSI_CONSTANTS */
void scsi_print_command(struct scsi_cmnd *cmd)
{
/* Assume appended output (i.e. not at start of line) */
......
......@@ -18,6 +18,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/config.h>
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/module.h>
......@@ -1047,6 +1048,114 @@ void spi_display_xfer_agreement(struct scsi_target *starget)
}
EXPORT_SYMBOL(spi_display_xfer_agreement);
#ifdef CONFIG_SCSI_CONSTANTS
static const char * const one_byte_msgs[] = {
/* 0x00 */ "Command Complete", NULL, "Save Pointers",
/* 0x03 */ "Restore Pointers", "Disconnect", "Initiator Error",
/* 0x06 */ "Abort", "Message Reject", "Nop", "Message Parity Error",
/* 0x0a */ "Linked Command Complete", "Linked Command Complete w/flag",
/* 0x0c */ "Bus device reset", "Abort Tag", "Clear Queue",
/* 0x0f */ "Initiate Recovery", "Release Recovery"
};
#define NO_ONE_BYTE_MSGS (sizeof(one_byte_msgs) / sizeof (const char *))
static const char * const two_byte_msgs[] = {
/* 0x20 */ "Simple Queue Tag", "Head of Queue Tag", "Ordered Queue Tag"
/* 0x23 */ "Ignore Wide Residue"
};
#define NO_TWO_BYTE_MSGS (sizeof(two_byte_msgs) / sizeof (const char *))
static const char * const extended_msgs[] = {
/* 0x00 */ "Modify Data Pointer", "Synchronous Data Transfer Request",
/* 0x02 */ "SCSI-I Extended Identify", "Wide Data Transfer Request"
};
#define NO_EXTENDED_MSGS (sizeof(two_byte_msgs) / sizeof (const char *))
int scsi_print_msg (const unsigned char *msg)
{
int len = 0, i;
if (msg[0] == EXTENDED_MESSAGE) {
len = 3 + msg[1];
if (msg[2] < NO_EXTENDED_MSGS)
printk ("%s ", extended_msgs[msg[2]]);
else
printk ("Extended Message, reserved code (0x%02x) ",
(int) msg[2]);
switch (msg[2]) {
case EXTENDED_MODIFY_DATA_POINTER:
printk("pointer = %d", (int) (msg[3] << 24) |
(msg[4] << 16) | (msg[5] << 8) | msg[6]);
break;
case EXTENDED_SDTR:
printk("period = %d ns, offset = %d",
(int) msg[3] * 4, (int) msg[4]);
break;
case EXTENDED_WDTR:
printk("width = 2^%d bytes", msg[3]);
break;
default:
for (i = 2; i < len; ++i)
printk("%02x ", msg[i]);
}
/* Identify */
} else if (msg[0] & 0x80) {
printk("Identify disconnect %sallowed %s %d ",
(msg[0] & 0x40) ? "" : "not ",
(msg[0] & 0x20) ? "target routine" : "lun",
msg[0] & 0x7);
len = 1;
/* Normal One byte */
} else if (msg[0] < 0x1f) {
if (msg[0] < NO_ONE_BYTE_MSGS)
printk(one_byte_msgs[msg[0]]);
else
printk("reserved (%02x) ", msg[0]);
len = 1;
/* Two byte */
} else if (msg[0] <= 0x2f) {
if ((msg[0] - 0x20) < NO_TWO_BYTE_MSGS)
printk("%s %02x ", two_byte_msgs[msg[0] - 0x20],
msg[1]);
else
printk("reserved two byte (%02x %02x) ",
msg[0], msg[1]);
len = 2;
} else
printk("reserved");
return len;
}
EXPORT_SYMBOL(scsi_print_msg);
#else /* ifndef CONFIG_SCSI_CONSTANTS */
int scsi_print_msg (const unsigned char *msg)
{
int len = 0, i;
if (msg[0] == EXTENDED_MESSAGE) {
len = 3 + msg[1];
for (i = 0; i < len; ++i)
printk("%02x ", msg[i]);
/* Identify */
} else if (msg[0] & 0x80) {
printk("%02x ", msg[0]);
len = 1;
/* Normal One byte */
} else if (msg[0] < 0x1f) {
printk("%02x ", msg[0]);
len = 1;
/* Two byte */
} else if (msg[0] <= 0x2f) {
printk("%02x %02x", msg[0], msg[1]);
len = 2;
} else
printk("%02x ", msg[0]);
return len;
}
EXPORT_SYMBOL(scsi_print_msg);
#endif /* ! CONFIG_SCSI_CONSTANTS */
#define SETUP_ATTRIBUTE(field) \
i->private_attrs[count] = class_device_attr_##field; \
if (!i->f->set_##field) { \
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment