Commit 7a3e97b0 authored by Santosh Yaraganavi's avatar Santosh Yaraganavi Committed by James Bottomley
Browse files

[SCSI] ufshcd: UFS Host controller driver



This patch adds support for Universal Flash Storage(UFS)
host controllers. The UFS host controller driver
includes host controller initialization method.

The Initialization process involves following steps:
 - Initiate UFS Host Controller initialization process by writing
   to Host controller enable register
 - Configure UFS Host controller registers with host memory space
   datastructure offsets.
 - Unipro link startup procedure
 - Check for connected device
 - Configure UFS host controller to process requests
 - Enable required interrupts
 - Configure interrupt aggregation

[jejb: fix warnings in 32 bit compile]
Signed-off-by: default avatarSantosh Yaraganavi <santoshsy@gmail.com>
Signed-off-by: default avatarVinayak Holikatti <vinholikatti@gmail.com>
Reviewed-by: default avatarArnd Bergmann <arnd@linaro.org>
Reviewed-by: default avatarVishak G <vishak.g@samsung.com>
Reviewed-by: default avatarGirish K S <girish.shivananjappa@linaro.org>
Reviewed-by: default avatarNamjae Jeon <linkinjeon@gmail.com>
Signed-off-by: default avatarJames Bottomley <JBottomley@Parallels.com>
parent 0bd7f842
......@@ -94,3 +94,5 @@ sym53c8xx_2.txt
- info on second generation driver for sym53c8xx based adapters
tmscsim.txt
- info on driver for AM53c974 based adapters
ufs.txt
- info on Universal Flash Storage(UFS) and UFS host controller driver.
Universal Flash Storage
=======================
Contents
--------
1. Overview
2. UFS Architecture Overview
2.1 Application Layer
2.2 UFS Transport Protocol(UTP) layer
2.3 UFS Interconnect(UIC) Layer
3. UFSHCD Overview
3.1 UFS controller initialization
3.2 UTP Transfer requests
3.3 UFS error handling
3.4 SCSI Error handling
1. Overview
-----------
Universal Flash Storage(UFS) is a storage specification for flash devices.
It is aimed to provide a universal storage interface for both
embedded and removable flash memory based storage in mobile
devices such as smart phones and tablet computers. The specification
is defined by JEDEC Solid State Technology Association. UFS is based
on MIPI M-PHY physical layer standard. UFS uses MIPI M-PHY as the
physical layer and MIPI Unipro as the link layer.
The main goals of UFS is to provide,
* Optimized performance:
For UFS version 1.0 and 1.1 the target performance is as follows,
Support for Gear1 is mandatory (rate A: 1248Mbps, rate B: 1457.6Mbps)
Support for Gear2 is optional (rate A: 2496Mbps, rate B: 2915.2Mbps)
Future version of the standard,
Gear3 (rate A: 4992Mbps, rate B: 5830.4Mbps)
* Low power consumption
* High random IOPs and low latency
2. UFS Architecture Overview
----------------------------
UFS has a layered communication architecture which is based on SCSI
SAM-5 architectural model.
UFS communication architecture consists of following layers,
2.1 Application Layer
The Application layer is composed of UFS command set layer(UCS),
Task Manager and Device manager. The UFS interface is designed to be
protocol agnostic, however SCSI has been selected as a baseline
protocol for versions 1.0 and 1.1 of UFS protocol layer.
UFS supports subset of SCSI commands defined by SPC-4 and SBC-3.
* UCS: It handles SCSI commands supported by UFS specification.
* Task manager: It handles task management functions defined by the
UFS which are meant for command queue control.
* Device manager: It handles device level operations and device
configuration operations. Device level operations mainly involve
device power management operations and commands to Interconnect
layers. Device level configurations involve handling of query
requests which are used to modify and retrieve configuration
information of the device.
2.2 UFS Transport Protocol(UTP) layer
UTP layer provides services for
the higher layers through Service Access Points. UTP defines 3
service access points for higher layers.
* UDM_SAP: Device manager service access point is exposed to device
manager for device level operations. These device level operations
are done through query requests.
* UTP_CMD_SAP: Command service access point is exposed to UFS command
set layer(UCS) to transport commands.
* UTP_TM_SAP: Task management service access point is exposed to task
manager to transport task management functions.
UTP transports messages through UFS protocol information unit(UPIU).
2.3 UFS Interconnect(UIC) Layer
UIC is the lowest layer of UFS layered architecture. It handles
connection between UFS host and UFS device. UIC consists of
MIPI UniPro and MIPI M-PHY. UIC provides 2 service access points
to upper layer,
* UIC_SAP: To transport UPIU between UFS host and UFS device.
* UIO_SAP: To issue commands to Unipro layers.
3. UFSHCD Overview
------------------
The UFS host controller driver is based on Linux SCSI Framework.
UFSHCD is a low level device driver which acts as an interface between
SCSI Midlayer and PCIe based UFS host controllers.
The current UFSHCD implementation supports following functionality,
3.1 UFS controller initialization
The initialization module brings UFS host controller to active state
and prepares the controller to transfer commands/response between
UFSHCD and UFS device.
3.2 UTP Transfer requests
Transfer request handling module of UFSHCD receives SCSI commands
from SCSI Midlayer, forms UPIUs and issues the UPIUs to UFS Host
controller. Also, the module decodes, responses received from UFS
host controller in the form of UPIUs and intimates the SCSI Midlayer
of the status of the command.
3.3 UFS error handling
Error handling module handles Host controller fatal errors,
Device fatal errors and UIC interconnect layer related errors.
3.4 SCSI Error handling
This is done through UFSHCD SCSI error handling routines registered
with SCSI Midlayer. Examples of some of the error handling commands
issues by SCSI Midlayer are Abort task, Lun reset and host reset.
UFSHCD Routines to perform these tasks are registered with
SCSI Midlayer through .eh_abort_handler, .eh_device_reset_handler and
.eh_host_reset_handler.
In this version of UFSHCD Query requests and power management
functionality are not implemented.
UFS Specifications can be found at,
UFS - http://www.jedec.org/sites/default/files/docs/JESD220.pdf
UFSHCI - http://www.jedec.org/sites/default/files/docs/JESD223.pdf
......@@ -619,6 +619,7 @@ config SCSI_ARCMSR
source "drivers/scsi/megaraid/Kconfig.megaraid"
source "drivers/scsi/mpt2sas/Kconfig"
source "drivers/scsi/ufs/Kconfig"
config SCSI_HPTIOP
tristate "HighPoint RocketRAID 3xxx/4xxx Controller support"
......
......@@ -108,6 +108,7 @@ obj-$(CONFIG_MEGARAID_LEGACY) += megaraid.o
obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/
obj-$(CONFIG_MEGARAID_SAS) += megaraid/
obj-$(CONFIG_SCSI_MPT2SAS) += mpt2sas/
obj-$(CONFIG_SCSI_UFSHCD) += ufs/
obj-$(CONFIG_SCSI_ACARD) += atp870u.o
obj-$(CONFIG_SCSI_SUNESP) += esp_scsi.o sun_esp.o
obj-$(CONFIG_SCSI_GDTH) += gdth.o
......
#
# Kernel configuration file for the UFS Host Controller
#
# This code is based on drivers/scsi/ufs/Kconfig
# Copyright (C) 2011 Samsung Samsung India Software Operations
#
# Santosh Yaraganavi <santosh.sy@samsung.com>
# Vinayak Holikatti <h.vinayak@samsung.com>
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# NO WARRANTY
# THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
# CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
# LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
# MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
# solely responsible for determining the appropriateness of using and
# distributing the Program and assumes all risks associated with its
# exercise of rights under this Agreement, including but not limited to
# the risks and costs of program errors, damage to or loss of data,
# programs or equipment, and unavailability or interruption of operations.
# DISCLAIMER OF LIABILITY
# NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
# TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
# USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
# HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
# USA.
config SCSI_UFSHCD
tristate "Universal Flash Storage host controller driver"
depends on PCI && SCSI
---help---
This is a generic driver which supports PCIe UFS Host controllers.
# UFSHCD makefile
obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
/*
* Universal Flash Storage Host controller driver
*
* This code is based on drivers/scsi/ufs/ufs.h
* Copyright (C) 2011-2012 Samsung India Software Operations
*
* Santosh Yaraganavi <santosh.sy@samsung.com>
* Vinayak Holikatti <h.vinayak@samsung.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* NO WARRANTY
* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
* solely responsible for determining the appropriateness of using and
* distributing the Program and assumes all risks associated with its
* exercise of rights under this Agreement, including but not limited to
* the risks and costs of program errors, damage to or loss of data,
* programs or equipment, and unavailability or interruption of operations.
* DISCLAIMER OF LIABILITY
* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
* USA.
*/
#ifndef _UFS_H
#define _UFS_H
#define MAX_CDB_SIZE 16
#define UPIU_HEADER_DWORD(byte3, byte2, byte1, byte0)\
((byte3 << 24) | (byte2 << 16) |\
(byte1 << 8) | (byte0))
/*
* UFS Protocol Information Unit related definitions
*/
/* Task management functions */
enum {
UFS_ABORT_TASK = 0x01,
UFS_ABORT_TASK_SET = 0x02,
UFS_CLEAR_TASK_SET = 0x04,
UFS_LOGICAL_RESET = 0x08,
UFS_QUERY_TASK = 0x80,
UFS_QUERY_TASK_SET = 0x81,
};
/* UTP UPIU Transaction Codes Initiator to Target */
enum {
UPIU_TRANSACTION_NOP_OUT = 0x00,
UPIU_TRANSACTION_COMMAND = 0x01,
UPIU_TRANSACTION_DATA_OUT = 0x02,
UPIU_TRANSACTION_TASK_REQ = 0x04,
UPIU_TRANSACTION_QUERY_REQ = 0x26,
};
/* UTP UPIU Transaction Codes Target to Initiator */
enum {
UPIU_TRANSACTION_NOP_IN = 0x20,
UPIU_TRANSACTION_RESPONSE = 0x21,
UPIU_TRANSACTION_DATA_IN = 0x22,
UPIU_TRANSACTION_TASK_RSP = 0x24,
UPIU_TRANSACTION_READY_XFER = 0x31,
UPIU_TRANSACTION_QUERY_RSP = 0x36,
};
/* UPIU Read/Write flags */
enum {
UPIU_CMD_FLAGS_NONE = 0x00,
UPIU_CMD_FLAGS_WRITE = 0x20,
UPIU_CMD_FLAGS_READ = 0x40,
};
/* UPIU Task Attributes */
enum {
UPIU_TASK_ATTR_SIMPLE = 0x00,
UPIU_TASK_ATTR_ORDERED = 0x01,
UPIU_TASK_ATTR_HEADQ = 0x02,
UPIU_TASK_ATTR_ACA = 0x03,
};
/* UTP QUERY Transaction Specific Fields OpCode */
enum {
UPIU_QUERY_OPCODE_NOP = 0x0,
UPIU_QUERY_OPCODE_READ_DESC = 0x1,
UPIU_QUERY_OPCODE_WRITE_DESC = 0x2,
UPIU_QUERY_OPCODE_READ_ATTR = 0x3,
UPIU_QUERY_OPCODE_WRITE_ATTR = 0x4,
UPIU_QUERY_OPCODE_READ_FLAG = 0x5,
UPIU_QUERY_OPCODE_SET_FLAG = 0x6,
UPIU_QUERY_OPCODE_CLEAR_FLAG = 0x7,
UPIU_QUERY_OPCODE_TOGGLE_FLAG = 0x8,
};
/* UTP Transfer Request Command Type (CT) */
enum {
UPIU_COMMAND_SET_TYPE_SCSI = 0x0,
UPIU_COMMAND_SET_TYPE_UFS = 0x1,
UPIU_COMMAND_SET_TYPE_QUERY = 0x2,
};
enum {
MASK_SCSI_STATUS = 0xFF,
MASK_TASK_RESPONSE = 0xFF00,
MASK_RSP_UPIU_RESULT = 0xFFFF,
};
/* Task management service response */
enum {
UPIU_TASK_MANAGEMENT_FUNC_COMPL = 0x00,
UPIU_TASK_MANAGEMENT_FUNC_NOT_SUPPORTED = 0x04,
UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED = 0x08,
UPIU_TASK_MANAGEMENT_FUNC_FAILED = 0x05,
UPIU_INCORRECT_LOGICAL_UNIT_NO = 0x09,
};
/**
* struct utp_upiu_header - UPIU header structure
* @dword_0: UPIU header DW-0
* @dword_1: UPIU header DW-1
* @dword_2: UPIU header DW-2
*/
struct utp_upiu_header {
u32 dword_0;
u32 dword_1;
u32 dword_2;
};
/**
* struct utp_upiu_cmd - Command UPIU structure
* @header: UPIU header structure DW-0 to DW-2
* @data_transfer_len: Data Transfer Length DW-3
* @cdb: Command Descriptor Block CDB DW-4 to DW-7
*/
struct utp_upiu_cmd {
struct utp_upiu_header header;
u32 exp_data_transfer_len;
u8 cdb[MAX_CDB_SIZE];
};
/**
* struct utp_upiu_rsp - Response UPIU structure
* @header: UPIU header DW-0 to DW-2
* @residual_transfer_count: Residual transfer count DW-3
* @reserved: Reserved double words DW-4 to DW-7
* @sense_data_len: Sense data length DW-8 U16
* @sense_data: Sense data field DW-8 to DW-12
*/
struct utp_upiu_rsp {
struct utp_upiu_header header;
u32 residual_transfer_count;
u32 reserved[4];
u16 sense_data_len;
u8 sense_data[18];
};
/**
* struct utp_upiu_task_req - Task request UPIU structure
* @header - UPIU header structure DW0 to DW-2
* @input_param1: Input parameter 1 DW-3
* @input_param2: Input parameter 2 DW-4
* @input_param3: Input parameter 3 DW-5
* @reserved: Reserved double words DW-6 to DW-7
*/
struct utp_upiu_task_req {
struct utp_upiu_header header;
u32 input_param1;
u32 input_param2;
u32 input_param3;
u32 reserved[2];
};
/**
* struct utp_upiu_task_rsp - Task Management Response UPIU structure
* @header: UPIU header structure DW0-DW-2
* @output_param1: Ouput parameter 1 DW3
* @output_param2: Output parameter 2 DW4
* @reserved: Reserved double words DW-5 to DW-7
*/
struct utp_upiu_task_rsp {
struct utp_upiu_header header;
u32 output_param1;
u32 output_param2;
u32 reserved[3];
};
#endif /* End of Header */
This diff is collapsed.
/*
* Universal Flash Storage Host controller driver
*
* This code is based on drivers/scsi/ufs/ufshci.h
* Copyright (C) 2011-2012 Samsung India Software Operations
*
* Santosh Yaraganavi <santosh.sy@samsung.com>
* Vinayak Holikatti <h.vinayak@samsung.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* NO WARRANTY
* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
* solely responsible for determining the appropriateness of using and
* distributing the Program and assumes all risks associated with its
* exercise of rights under this Agreement, including but not limited to
* the risks and costs of program errors, damage to or loss of data,
* programs or equipment, and unavailability or interruption of operations.
* DISCLAIMER OF LIABILITY
* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
* USA.
*/
#ifndef _UFSHCI_H
#define _UFSHCI_H
enum {
TASK_REQ_UPIU_SIZE_DWORDS = 8,
TASK_RSP_UPIU_SIZE_DWORDS = 8,
ALIGNED_UPIU_SIZE = 128,
};
/* UFSHCI Registers */
enum {
REG_CONTROLLER_CAPABILITIES = 0x00,
REG_UFS_VERSION = 0x08,
REG_CONTROLLER_DEV_ID = 0x10,
REG_CONTROLLER_PROD_ID = 0x14,
REG_INTERRUPT_STATUS = 0x20,
REG_INTERRUPT_ENABLE = 0x24,
REG_CONTROLLER_STATUS = 0x30,
REG_CONTROLLER_ENABLE = 0x34,
REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER = 0x38,
REG_UIC_ERROR_CODE_DATA_LINK_LAYER = 0x3C,
REG_UIC_ERROR_CODE_NETWORK_LAYER = 0x40,
REG_UIC_ERROR_CODE_TRANSPORT_LAYER = 0x44,
REG_UIC_ERROR_CODE_DME = 0x48,
REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL = 0x4C,
REG_UTP_TRANSFER_REQ_LIST_BASE_L = 0x50,
REG_UTP_TRANSFER_REQ_LIST_BASE_H = 0x54,
REG_UTP_TRANSFER_REQ_DOOR_BELL = 0x58,
REG_UTP_TRANSFER_REQ_LIST_CLEAR = 0x5C,
REG_UTP_TRANSFER_REQ_LIST_RUN_STOP = 0x60,
REG_UTP_TASK_REQ_LIST_BASE_L = 0x70,
REG_UTP_TASK_REQ_LIST_BASE_H = 0x74,
REG_UTP_TASK_REQ_DOOR_BELL = 0x78,
REG_UTP_TASK_REQ_LIST_CLEAR = 0x7C,
REG_UTP_TASK_REQ_LIST_RUN_STOP = 0x80,
REG_UIC_COMMAND = 0x90,
REG_UIC_COMMAND_ARG_1 = 0x94,
REG_UIC_COMMAND_ARG_2 = 0x98,
REG_UIC_COMMAND_ARG_3 = 0x9C,
};
/* Controller capability masks */
enum {
MASK_TRANSFER_REQUESTS_SLOTS = 0x0000001F,
MASK_TASK_MANAGEMENT_REQUEST_SLOTS = 0x00070000,
MASK_64_ADDRESSING_SUPPORT = 0x01000000,
MASK_OUT_OF_ORDER_DATA_DELIVERY_SUPPORT = 0x02000000,
MASK_UIC_DME_TEST_MODE_SUPPORT = 0x04000000,
};
/* UFS Version 08h */
#define MINOR_VERSION_NUM_MASK UFS_MASK(0xFFFF, 0)
#define MAJOR_VERSION_NUM_MASK UFS_MASK(0xFFFF, 16)
/* Controller UFSHCI version */
enum {
UFSHCI_VERSION_10 = 0x00010000,
UFSHCI_VERSION_11 = 0x00010100,
};
/*
* HCDDID - Host Controller Identification Descriptor
* - Device ID and Device Class 10h
*/
#define DEVICE_CLASS UFS_MASK(0xFFFF, 0)
#define DEVICE_ID UFS_MASK(0xFF, 24)
/*
* HCPMID - Host Controller Identification Descriptor
* - Product/Manufacturer ID 14h
*/
#define MANUFACTURE_ID_MASK UFS_MASK(0xFFFF, 0)
#define PRODUCT_ID_MASK UFS_MASK(0xFFFF, 16)
#define UFS_BIT(x) (1L << (x))
#define UTP_TRANSFER_REQ_COMPL UFS_BIT(0)
#define UIC_DME_END_PT_RESET UFS_BIT(1)
#define UIC_ERROR UFS_BIT(2)
#define UIC_TEST_MODE UFS_BIT(3)
#define UIC_POWER_MODE UFS_BIT(4)
#define UIC_HIBERNATE_EXIT UFS_BIT(5)
#define UIC_HIBERNATE_ENTER UFS_BIT(6)
#define UIC_LINK_LOST UFS_BIT(7)
#define UIC_LINK_STARTUP UFS_BIT(8)
#define UTP_TASK_REQ_COMPL UFS_BIT(9)
#define UIC_COMMAND_COMPL UFS_BIT(10)
#define DEVICE_FATAL_ERROR UFS_BIT(11)
#define CONTROLLER_FATAL_ERROR UFS_BIT(16)
#define SYSTEM_BUS_FATAL_ERROR UFS_BIT(17)
#define UFSHCD_ERROR_MASK (UIC_ERROR |\
DEVICE_FATAL_ERROR |\
CONTROLLER_FATAL_ERROR |\
SYSTEM_BUS_FATAL_ERROR)
#define INT_FATAL_ERRORS (DEVICE_FATAL_ERROR |\
CONTROLLER_FATAL_ERROR |\
SYSTEM_BUS_FATAL_ERROR)
/* HCS - Host Controller Status 30h */
#define DEVICE_PRESENT UFS_BIT(0)
#define UTP_TRANSFER_REQ_LIST_READY UFS_BIT(1)
#define UTP_TASK_REQ_LIST_READY UFS_BIT(2)
#define UIC_COMMAND_READY UFS_BIT(3)
#define HOST_ERROR_INDICATOR UFS_BIT(4)
#define DEVICE_ERROR_INDICATOR UFS_BIT(5)
#define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK UFS_MASK(0x7, 8)
/* HCE - Host Controller Enable 34h */
#define CONTROLLER_ENABLE UFS_BIT(0)
#define CONTROLLER_DISABLE 0x0
/* UECPA - Host UIC Error Code PHY Adapter Layer 38h */
#define UIC_PHY_ADAPTER_LAYER_ERROR UFS_BIT(31)
#define UIC_PHY_ADAPTER_LAYER_ERROR_CODE_MASK 0x1F
/* UECDL - Host UIC Error Code Data Link Layer 3Ch */
#define UIC_DATA_LINK_LAYER_ERROR UFS_BIT(31)
#define UIC_DATA_LINK_LAYER_ERROR_CODE_MASK 0x7FFF
#define UIC_DATA_LINK_LAYER_ERROR_PA_INIT 0x2000
/* UECN - Host UIC Error Code Network Layer 40h */
#define UIC_NETWORK_LAYER_ERROR UFS_BIT(31)
#define UIC_NETWORK_LAYER_ERROR_CODE_MASK 0x7
/* UECT - Host UIC Error Code Transport Layer 44h */
#define UIC_TRANSPORT_LAYER_ERROR UFS_BIT(31)
#define UIC_TRANSPORT_LAYER_ERROR_CODE_MASK 0x7F
/* UECDME - Host UIC Error Code DME 48h */
#define UIC_DME_ERROR UFS_BIT(31)
#define UIC_DME_ERROR_CODE_MASK 0x1
#define INT_AGGR_TIMEOUT_VAL_MASK 0xFF
#define INT_AGGR_COUNTER_THRESHOLD_MASK UFS_MASK(0x1F, 8)
#define INT_AGGR_COUNTER_AND_TIMER_RESET UFS_BIT(16)
#define INT_AGGR_STATUS_BIT UFS_BIT(20)
#define INT_AGGR_PARAM_WRITE UFS_BIT(24)
#define INT_AGGR_ENABLE UFS_BIT(31)
/* UTRLRSR - UTP Transfer Request Run-Stop Register 60h */
#define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT UFS_BIT(0)
/* UTMRLRSR - UTP Task Management Request Run-Stop Register 80h */
#define UTP_TASK_REQ_LIST_RUN_STOP_BIT UFS_BIT(0)
/* UICCMD - UIC Command */
#define COMMAND_OPCODE_MASK 0xFF
#define GEN_SELECTOR_INDEX_MASK 0xFFFF
#define MIB_ATTRIBUTE_MASK UFS_MASK(0xFFFF, 16)
#define RESET_LEVEL 0xFF
#define ATTR_SET_TYPE_MASK UFS_MASK(0xFF, 16)
#define CONFIG_RESULT_CODE_MASK 0xFF
#define GENERIC_ERROR_CODE_MASK 0xFF
/* UIC Commands */
enum {
UIC_CMD_DME_GET = 0x01,
UIC_CMD_DME_SET = 0x02,
UIC_CMD_DME_PEER_GET = 0x03,
UIC_CMD_DME_PEER_SET = 0x04,
UIC_CMD_DME_POWERON = 0x10,
UIC_CMD_DME_POWEROFF = 0x11,
UIC_CMD_DME_ENABLE = 0x12,
UIC_CMD_DME_RESET = 0x14,
UIC_CMD_DME_END_PT_RST = 0x15,
UIC_CMD_DME_LINK_STARTUP = 0x16,
UIC_CMD_DME_HIBER_ENTER = 0x17,
UIC_CMD_DME_HIBER_EXIT = 0x18,
UIC_CMD_DME_TEST_MODE = 0x1A,
};
/* UIC Config result code / Generic error code */
enum {
UIC_CMD_RESULT_SUCCESS = 0x00,