Commit a7ce2e0d authored by Uwe Kleine-König's avatar Uwe Kleine-König Committed by Jiri Kosina
Browse files

fix comnment/printk typos concerning "empty"

Signed-off-by: default avatarUwe Kleine-König <>
Signed-off-by: default avatarJiri Kosina <>
parent e3845dee
......@@ -807,7 +807,7 @@ Changes from 20040908 to 20040920
lpfc_disc_done/lpfc_do_dpc cleanup - lpfc_disc_done can return
void - move lpfc_do_dpc and lpfc_disc_done to lpfc_hbadisc.c -
remove checking of list emptiness before calling lpfc_disc_done,
it handles the emtpy list case just fine and the additional
it handles the empty list case just fine and the additional
instructions cost less then the bustlocked spinlock operations.
* Integrated patch from Christoph Hellwig: This adds a new 64bit
counter instead, brd_no isn't reused anymore. Also some tiny
......@@ -310,7 +310,7 @@ imx_dma_setup_sg(int channel,
imxdma->resbytes = dma_length;
if (!sg || !sgcount) {
printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n",
printk(KERN_ERR "imxdma%d: imx_dma_setup_sg empty sg list\n",
return -EINVAL;
......@@ -615,7 +615,7 @@ ultra2_dmafifoflush:
* went empty and the next bit of data is copied from
* the SCSI fifo into the PCI fifo. It should only
* come on when both FIFOs (meaning the entire FIFO
* chain) are emtpy. Since it can take up to 4 cycles
* chain) are empty. Since it can take up to 4 cycles
* for new data to be copied from the SCSI fifo into
* the PCI fifo, testing for FIFOEMP status for 4
* extra times gives the needed time for any
......@@ -81,7 +81,7 @@ nwpserial_console_write(struct console *co, const char *s, unsigned int count)
uart_console_write(&up->port, s, count, nwpserial_console_putchar);
/* wait for transmitter to become emtpy */
/* wait for transmitter to become empty */
while ((dcr_read(up->dcr_host, UART_LSR) & UART_LSR_THRE) == 0)
......@@ -636,7 +636,7 @@ static int hw_rule_period_time(struct snd_pcm_hw_params *params,
min_datainterval = min(min_datainterval, fp->datainterval);
if (min_datainterval == 0xff) {
hwc_debug(" --> get emtpy\n");
hwc_debug(" --> get empty\n");
it->empty = 1;
return -EINVAL;
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment