Commit ae67b800 authored by Suman Anna's avatar Suman Anna Committed by Bjorn Andersson
Browse files

dt-bindings: remoteproc: Add bindings for Davinci DSP processors



Add the device tree bindings document for the DSP processor
subsystem devices on TI Davinci DA8xx/OMAP-L13x SoCs.
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarSuman Anna <s-anna@ti.com>
Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
parent 59b2355f
TI Davinci DSP devices
=======================
Binding status: Unstable - Subject to changes for DT representation of clocks
and resets
The TI Davinci family of SoCs usually contains a TI DSP Core sub-system that
is used to offload some of the processor-intensive tasks or algorithms, for
achieving various system level goals.
The processor cores in the sub-system usually contain additional sub-modules
like L1 and/or L2 caches/SRAMs, an Interrupt Controller, an external memory
controller, a dedicated local power/sleep controller etc. The DSP processor
core used in Davinci SoCs is usually a C674x DSP CPU.
DSP Device Node:
================
Each DSP Core sub-system is represented as a single DT node.
Required properties:
--------------------
The following are the mandatory properties:
- compatible: Should be one of the following,
"ti,da850-dsp" for DSPs on OMAP-L138 SoCs
- reg: Should contain an entry for each value in 'reg-names'.
Each entry should have the memory region's start address
and the size of the region, the representation matching
the parent node's '#address-cells' and '#size-cells' values.
- reg-names: Should contain strings with the following names, each
representing a specific internal memory region or a
specific register space,
"l2sram", "l1pram", "l1dram", "host1cfg", "chipsig_base"
- interrupts: Should contain the interrupt number used to receive the
interrupts from the DSP. The value should follow the
interrupt-specifier format as dictated by the
'interrupt-parent' node.
- memory-region: phandle to the reserved memory node to be associated
with the remoteproc device. The reserved memory node
can be a CMA memory node, and should be defined as
per the bindings in
Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
Optional properties:
--------------------
- interrupt-parent: phandle to the interrupt controller node. This property
is needed if the device node hierarchy doesn't have an
interrupt controller.
Example:
--------
/* DSP Reserved Memory node */
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
dsp_memory_region: dsp-memory@c3000000 {
compatible = "shared-dma-pool";
reg = <0xc3000000 0x1000000>;
reusable;
};
};
/* DSP node */
{
dsp: dsp@11800000 {
compatible = "ti,da850-dsp";
reg = <0x11800000 0x40000>,
<0x11e00000 0x8000>,
<0x11f00000 0x8000>,
<0x01c14044 0x4>,
<0x01c14174 0x8>;
reg-names = "l2sram", "l1pram", "l1dram", "host1cfg",
"chipsig";
interrupt-parent = <&intc>;
interrupts = <28>;
memory-region = <&dsp_memory_region>;
};
};
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment