Commit d2be279b authored by Amelie Delaunay's avatar Amelie Delaunay Committed by Alexandre Belloni
Browse files

dt-bindings: rtc: stm32: add support for STM32H7

This patch documents support for STM32H7 Real Time Clock.
It introduces a new compatible and rework clock definitions.
On STM32H7 we have a 'pclk' clock for register access, in addition to
the 'rtc_ck' clock.
Acked-by: default avatarRob Herring <>
Signed-off-by: default avatarAmelie Delaunay <>
Signed-off-by: default avatarAlexandre Belloni <>
parent 300a7735
STM32 Real Time Clock
Required properties:
- compatible: "st,stm32-rtc".
- compatible: can be either "st,stm32-rtc" or "st,stm32h7-rtc", depending on
the device is compatible with stm32(f4/f7) or stm32h7.
- reg: address range of rtc register set.
- clocks: reference to the clock entry ck_rtc.
- clocks: can use up to two clocks, depending on part used:
- "rtc_ck": RTC clock source.
It is required on stm32(f4/f7) and stm32h7.
- "pclk": RTC APB interface clock.
It is not present on stm32(f4/f7).
It is required on stm32h7.
- clock-names: must be "rtc_ck" and "pclk".
It is required only on stm32h7.
- interrupt-parent: phandle for the interrupt controller.
- interrupts: rtc alarm interrupt.
- st,syscfg: phandle for pwrcfg, mandatory to disable/enable backup domain
(RTC registers) write protection.
Optional properties (to override default ck_rtc parent clock):
- assigned-clocks: reference to the ck_rtc clock entry.
- assigned-clock-parents: phandle of the new parent clock of ck_rtc.
Optional properties (to override default rtc_ck parent clock):
- assigned-clocks: reference to the rtc_ck clock entry.
- assigned-clock-parents: phandle of the new parent clock of rtc_ck.
......@@ -25,3 +33,17 @@ Example:
interrupts = <17 1>;
st,syscfg = <&pwrcfg>;
rtc: rtc@58004000 {
compatible = "st,stm32h7-rtc";
reg = <0x58004000 0x400>;
clocks = <&rcc RTCAPB_CK>, <&rcc RTC_CK>;
clock-names = "pclk", "rtc_ck";
assigned-clocks = <&rcc RTC_CK>;
assigned-clock-parents = <&rcc LSE_CK>;
interrupt-parent = <&exti>;
interrupts = <17 1>;
interrupt-names = "alarm";
st,syscfg = <&pwrcfg>;
status = "disabled";
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment