1. 01 May, 2012 1 commit
  2. 13 Apr, 2012 1 commit
  3. 22 Feb, 2012 1 commit
  4. 06 Feb, 2012 1 commit
    • Jarod Wilson's avatar
      HID: add support for tivo slide remote · 44ea35c1
      Jarod Wilson authored
      
      
      This patch finishes off adding full support for the TiVo Slide remote,
      which is a mostly pure HID device from the perspective of the kernel.
      There are a few mappings that use a vendor-specific usage page, and a
      few keys in the consumer usage page that I think make sense to remap
      slightly, to better fit their key labels' intended use. Doing this in a
      stand-alone hid-tivo.c makes the modifications only matter for this
      specific device.
      
      What's actually connected to the computer is a Broadcom-made usb dongle,
      which has an embedded hub, bluetooth adapter, mouse and keyboard
      devices. You pair with the dongle, then the remote sends data that its
      converted into HID on the keyboard interface (the mouse interface
      doesn't do anything interesting, so far as I can tell).
      
      lsusb for this device:
      Bus 004 Device 005: ID 0a5c:2190 Broadcom Corp.
      Bus 004 Device 004: ID 0a5c:4503 Broadcom Corp.
      Bus 004 Device 003: ID 150a:1201
      Bus 004 Device 002: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
      
      Speaking of the keyboard interface, the remote actually does contain a
      keyboard as well. The top slides away, revealing a reasonably functional
      qwerty keyboard (not unlike many slide cell phones), thus the product
      name.
      
      CC: Jiri Kosina <jkosina@suse.cz>
      Signed-off-by: default avatarJarod Wilson <jarod@redhat.com>
      Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
      44ea35c1
  5. 05 Feb, 2012 1 commit
  6. 06 Dec, 2011 1 commit
  7. 30 Nov, 2011 1 commit
  8. 22 Nov, 2011 5 commits
    • David Herrmann's avatar
      HID: wiimote: Add debugfs support stubs · 43e5e7c6
      David Herrmann authored
      
      
      Add initializer and deinitializer for debugfs support. This will later allow raw
      eeprom access and direct DRM modifications to debug wiimote behaviour and
      further protocol reverse-engineerings.
      Signed-off-by: default avatarDavid Herrmann <dh.herrmann@googlemail.com>
      Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
      43e5e7c6
    • David Herrmann's avatar
      HID: wiimote: Add extension support stub · cb99221b
      David Herrmann authored
      
      
      The wiimote supports several extensions. This adds a separate source file which
      handles all extensions and can be disabled at compile-time.
      
      The driver reacts on "plug"-events on the extension port and starts a worker
      which initializes or deinitializes the extensions.
      
      Currently, the initialization logic is not fully understood and we can only
      detect and enable all extensions when all extensions are deactivated. Therefore,
      we need to disable all extensions, then detect and activate them again to react
      on "plug"-events.
      However, deactivating extensions will generate a new "plug"-event and we will
      never leave that loop. Hence, we only support extensions if they are plugged
      before the wiimote is connected (or before the ext-input device is opened). In
      the future we may support full extension hotplug support, but
      reverse-engineering this may take a while.
      Signed-off-by: default avatarDavid Herrmann <dh.herrmann@googlemail.com>
      Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
      cb99221b
    • David Herrmann's avatar
      HID: wiimote: Rename driver to allow multiple source files · 192a1acf
      David Herrmann authored
      
      
      Extension and sound support for the wiimote are quite complex and will be
      implemented in separate source files. Hence rename the current driver to "-core"
      suffix so multiple files can be linked into this module.
      Signed-off-by: default avatarDavid Herrmann <dh.herrmann@googlemail.com>
      Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
      192a1acf
    • Jiri Kosina's avatar
      HID: hyperv: fixup Kconfig / Makefile entries · 6cf851d8
      Jiri Kosina authored
      
      
      Rename the Kconfig entry for hyperv mouse driver so that it has
      HID_ prefix as all the other drivers; while at it, place the entry
      for this driver to properly ordered place in Makefile and Kconfig.
      Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
      6cf851d8
    • K. Y. Srinivasan's avatar
      HID: Move the hid-hyperv driver out of staging · b95f5bcb
      K. Y. Srinivasan authored
      
      
      The file  hid-hyperv.c implements a hid compliant mouse driver for use on a
      Hyper-V based system. This driver is currently in the staging area and as part
      of the effort to move this driver out of staging, I had posted the driver code
      for community review a few weeks ago. This current patch addresses all the
      review comments I have gotten to date. All the relevant patches have already
      been submitted to the staging tree as well.
      
      As per Greg's suggestion, this patch does not get rid of the code from
      the staging area. Once the mouse driver lands under the hid directory,
      we will cleanup the staging directory.
      Signed-off-by: default avatarK. Y. Srinivasan <kys@microsoft.com>
      Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
      b95f5bcb
  9. 17 Oct, 2011 1 commit
    • Terry Lambert's avatar
      HID: support primax keyboards violating USB HID spec · f6a04605
      Terry Lambert authored
      
      
      Primax keyboards with the issue this driver addresses report modifier
      keys as in band key events instead of as out of band modifier bits,
      resulting in the modifier keys generating key up events immediately
      before the keys they are intended to modify.  This driver rewrites
      the raw report data from such keyboards into USB HID 1.11 compliant
      report data.  It only matches the USB vendor and product IDs for the
      keyboard it has been tested on. Since there are several keyboards,
      notably a number of laptops and folding USB keyboards known to have
      similar unresolved problem reports, the list is expected to grow.
      Signed-off-by: default avatarTerry Lambert <tlambert@chromium.org>
      Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
      f6a04605
  10. 15 Sep, 2011 1 commit
    • Nestor Lopez Casado's avatar
      HID: Add full support for Logitech Unifying receivers · 534a7b8e
      Nestor Lopez Casado authored
      
      
      With this driver, all the devices paired to a single Unifying
      receiver are exposed to user processes in separated /input/dev
      nodes.
      
      Keyboards with different layouts can be treated differently,
      Multiplayer games on single PC (like home theater PC) can
      differentiate input coming from different kbds paired to the
      same receiver.
      
      Up to now, when Logitech Unifying receivers are connected to a
      Linux based system, a single keyboard and a single mouse are
      presented to the HID Layer, even if the Unifying receiver can
      pair up to six compatible devices. The Unifying receiver by default
      multiplexes all incoming events (from multiple keyboards/mice)
      into these two.
      Signed-off-by: default avatarNestor Lopez Casado <nlopezcasad@logitech.com>
      Signed-off-by: default avatarBenjamin Tissoires <benjamin.tissoires@gmail.com>
      Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
      534a7b8e
  11. 04 Aug, 2011 1 commit
  12. 11 Jul, 2011 1 commit
  13. 27 Jun, 2011 1 commit
  14. 08 Jun, 2011 1 commit
    • Stefan Kriwanek's avatar
      HID: Add driver to fix Speedlink VAD Cezanne support · 74bc6953
      Stefan Kriwanek authored
      
      
      Speedlink VAD Cezanne have a hardware bug that makes the cursor "jump" from one
      place to another every now and then. The issue are relative motion events
      erroneously reported by the device, each having a distance value of +256. This
      256 can in fact never occur due to real motion, therefore those events can
      safely be ignored.  The driver also drops useless EV_REL events with a value of
      0, that the device sends every time it sends an "real" EV_REL or EV_KEY event.
      Signed-off-by: default avatarStefan Kriwanek <mail@stefankriwanek.de>
      Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
      74bc6953
  15. 22 Apr, 2011 1 commit
  16. 24 Mar, 2011 1 commit
  17. 21 Mar, 2011 2 commits
  18. 14 Mar, 2011 1 commit
  19. 12 Mar, 2011 1 commit
  20. 17 Feb, 2011 1 commit
  21. 03 Feb, 2011 3 commits
  22. 01 Feb, 2011 1 commit
  23. 20 Jan, 2011 1 commit
  24. 11 Jan, 2011 1 commit
  25. 08 Jan, 2011 1 commit
  26. 18 Nov, 2010 1 commit
  27. 01 Nov, 2010 1 commit
  28. 22 Sep, 2010 1 commit
  29. 01 Sep, 2010 1 commit
  30. 23 Aug, 2010 1 commit
    • Nikolai Kondrashov's avatar
      HID: add support for two Waltop tablets · 72a46344
      Nikolai Kondrashov authored
      
      
      Add support for Waltop Slim Tablet 5.8 inch and Media Tablet 10.6 inch.
      
      These (and other Waltop) tablets are usually sold by different companies
      (such as Genius and Trust) and with different names, but with the same USB
      vendor/product IDs.
      
      Slim Tablet 5.8 inch is known to also be sold as Genius G-Pen F350 and Trust
      Widescreen Mini Tablet (item no 16485).
      
      Media Tablet 10.6 inch is known to also be sold as Genius G-Pen M609 and
      M609X. Of these only the latter is known to be supported.
      Signed-off-by: default avatarNikolai Kondrashov <spbnick@gmail.com>
      Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
      72a46344
  31. 09 Aug, 2010 1 commit
    • Nikolai Kondrashov's avatar
      HID: Add support for UC-Logic WP????U tablets · f8a489cc
      Nikolai Kondrashov authored
      
      
      Add support for UC-Logic WP4030U, WP5540U and WP8060U tablets.
      These tablets are usually sold by Genius, Trust and possibly others under
      different names and in different cases, but with the original USB
      vendor/product IDs.
      
      Currently, these tablets are supported by standalone X.org driver WizardPen.
      This patch aims to fix them in the kernel and make them supported by the
      generic evdev X.org driver. Still, some minor fixes in the X.org driver are
      to be made for the full stack support.
      Signed-off-by: default avatarNikolai Kondrashov <spbnick@gmail.com>
      Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
      f8a489cc
  32. 19 Jul, 2010 1 commit
  33. 28 Jun, 2010 1 commit