1. 02 Oct, 2011 2 commits
  2. 22 Sep, 2011 1 commit
    • Dan Williams's avatar
      [SCSI] libsas: sgpio write support · 8ec6552f
      Dan Williams authored
      
      
      Add SFF-8485 v0.7 / SAS-1 smp-write-gpio register support to libsas.
      Defer SAS-2 support unless/until it defines an sgpio interface.
      
      Minimum implementation needed to get the lights blinking.
      try_test_sas_gpio_gp_bit() provides a common method to parse the
      incoming write data (raw bitstream), and the to_sas_gpio_gp_bit() helper
      routine can be used as a basis for the set/clear operations for the
      'read' implementation.  Host implementations parse as many bits
      (ODx.[012]) as are locally supported and report the number of registers
      successfully written.  If the submitted data overruns the internal
      number of registers available report the write as a success with the
      number of bytes remaining reported in ->resid_len.
      
      Example (assuming an active backplane) set the "identify" pattern for
      the first 21 devices:
      
      smp_write_gpio --count=2 --data=92,49,24,92,24,92,49,24 -t 4 --index=1 /dev/bsg/sas_hostX
      Signed-off-by: default avatarDan Williams <dan.j.williams@intel.com>
      Signed-off-by: default avatarJames Bottomley <JBottomley@Parallels.com>
      8ec6552f
  3. 27 Aug, 2011 1 commit
  4. 27 May, 2011 1 commit
  5. 21 Dec, 2010 1 commit
  6. 16 Nov, 2010 1 commit
    • Jeff Garzik's avatar
      SCSI host lock push-down · f281233d
      Jeff Garzik authored
      
      
      Move the mid-layer's ->queuecommand() invocation from being locked
      with the host lock to being unlocked to facilitate speeding up the
      critical path for drivers who don't need this lock taken anyway.
      
      The patch below presents a simple SCSI host lock push-down as an
      equivalent transformation.  No locking or other behavior should change
      with this patch.  All existing bugs and locking orders are preserved.
      
      Additionally, add one parameter to queuecommand,
      	struct Scsi_Host *
      and remove one parameter from queuecommand,
      	void (*done)(struct scsi_cmnd *)
      
      Scsi_Host* is a convenient pointer that most host drivers need anyway,
      and 'done' is redundant to struct scsi_cmnd->scsi_done.
      
      Minimal code disturbance was attempted with this change.  Most drivers
      needed only two one-line modifications for their host lock push-down.
      Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
      Acked-by: default avatarJames Bottomley <James.Bottomley@suse.de>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      f281233d
  7. 08 Oct, 2010 1 commit
  8. 28 Jul, 2010 1 commit
  9. 30 Mar, 2010 1 commit
    • Tejun Heo's avatar
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking... · 5a0e3ad6
      Tejun Heo authored
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
      
      percpu.h is included by sched.h and module.h and thus ends up being
      included when building most .c files.  percpu.h includes slab.h which
      in turn includes gfp.h making everything defined by the two files
      universally available and complicating inclusion dependencies.
      
      percpu.h -> slab.h dependency is about to be removed.  Prepare for
      this change by updating users of gfp and slab facilities include those
      headers directly instead of assuming availability.  As this conversion
      needs to touch large number of source files, the following script is
      used as the basis of conversion.
      
        http://userweb.kernel.org/~tj/misc/slabh-sweep.py
      
      
      
      The script does the followings.
      
      * Scan files for gfp and slab usages and update includes such that
        only the necessary includes are there.  ie. if only gfp is used,
        gfp.h, if slab is used, slab.h.
      
      * When the script inserts a new include, it looks at the include
        blocks and try to put the new include such that its order conforms
        to its surrounding.  It's put in the include block which contains
        core kernel includes, in the same order that the rest are ordered -
        alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
        doesn't seem to be any matching order.
      
      * If the script can't find a place to put a new include (mostly
        because the file doesn't have fitting include block), it prints out
        an error message indicating which .h file needs to be added to the
        file.
      
      The conversion was done in the following steps.
      
      1. The initial automatic conversion of all .c files updated slightly
         over 4000 files, deleting around 700 includes and adding ~480 gfp.h
         and ~3000 slab.h inclusions.  The script emitted errors for ~400
         files.
      
      2. Each error was manually checked.  Some didn't need the inclusion,
         some needed manual addition while adding it to implementation .h or
         embedding .c file was more appropriate for others.  This step added
         inclusions to around 150 files.
      
      3. The script was run again and the output was compared to the edits
         from #2 to make sure no file was left behind.
      
      4. Several build tests were done and a couple of problems were fixed.
         e.g. lib/decompress_*.c used malloc/free() wrappers around slab
         APIs requiring slab.h to be added manually.
      
      5. The script was run on all .h files but without automatically
         editing them as sprinkling gfp.h and slab.h inclusions around .h
         files could easily lead to inclusion dependency hell.  Most gfp.h
         inclusion directives were ignored as stuff from gfp.h was usually
         wildly available and often used in preprocessor macros.  Each
         slab.h inclusion directive was examined and added manually as
         necessary.
      
      6. percpu.h was updated not to include slab.h.
      
      7. Build test were done on the following configurations and failures
         were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
         distributed build env didn't work with gcov compiles) and a few
         more options had to be turned off depending on archs to make things
         build (like ipr on powerpc/64 which failed due to missing writeq).
      
         * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
         * powerpc and powerpc64 SMP allmodconfig
         * sparc and sparc64 SMP allmodconfig
         * ia64 SMP allmodconfig
         * s390 SMP allmodconfig
         * alpha SMP allmodconfig
         * um on x86_64 SMP allmodconfig
      
      8. percpu.h modifications were reverted so that it could be applied as
         a separate patch and serve as bisection point.
      
      Given the fact that I had only a couple of failures from tests on step
      6, I'm fairly confident about the coverage of this conversion patch.
      If there is a breakage, it's likely to be something in one of the arch
      headers which should be easily discoverable easily on most builds of
      the specific arch.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Guess-its-ok-by: default avatarChristoph Lameter <cl@linux-foundation.org>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
      5a0e3ad6
  10. 04 Dec, 2009 1 commit
    • Mike Christie's avatar
      [SCSI] modify change_queue_depth to take in reason why it is being called · e881a172
      Mike Christie authored
      
      
      This patch modifies scsi_host_template->change_queue_depth so that
      it takes an argument indicating why it is being called. This will be
      used so that if a LLD needs to do some extra processing when
      handling queue fulls or later ramp ups, it can do so.
      
      This is a simple port of the drivers setting a change_queue_depth
      callback. In the patch I just have these LLDs adjust the queue depth
      if the user was requesting it.
      Signed-off-by: default avatarMike Christie <michaelc@cs.wisc.edu>
      
      [Vasu.Dev: v2
      	Also converted pmcraid_change_queue_depth and then verified
      all modules compile  using "make allmodconfig" for any new build
      warnings on X86_64.
      
      	Updated original description after combing two original
      patches from Mike to make this patch git bisectable.]
      Signed-off-by: default avatarVasu Dev <vasu.dev@intel.com>
      [jejb: fixed up 53c700]
      Signed-off-by: default avatarJames Bottomley <James.Bottomley@suse.de>
      e881a172
  11. 19 Apr, 2008 1 commit
  12. 07 Apr, 2008 1 commit
  13. 24 Feb, 2008 1 commit
  14. 25 Jan, 2008 1 commit
  15. 12 Jan, 2008 3 commits
  16. 02 Nov, 2007 1 commit
  17. 26 Jul, 2007 1 commit
  18. 18 Jul, 2007 3 commits
  19. 06 May, 2007 1 commit
  20. 11 Feb, 2007 1 commit
  21. 03 Feb, 2007 1 commit
  22. 27 Jan, 2007 1 commit
  23. 13 Jan, 2007 6 commits
  24. 07 Dec, 2006 1 commit
  25. 06 Dec, 2006 1 commit
  26. 29 Nov, 2006 1 commit
  27. 22 Nov, 2006 2 commits
  28. 15 Nov, 2006 2 commits