Commit a405ed85 authored by Tom Saeger's avatar Tom Saeger Committed by Jonathan Corbet
Browse files

Documentation: fix media related doc refs

Make media doc refs valid.
Signed-off-by: default avatarTom Saeger <>
Signed-off-by: default avatarJonathan Corbet <>
parent c7f66400
......@@ -439,7 +439,7 @@
bttv.card= [HW,V4L] bttv (bt848 + bt878 based grabber cards) Most important insmod options are available as
kernel args too.
bttv.pll= See Documentation/video4linux/bttv/Insmod-options
bttv.pll= See Documentation/media/v4l-drivers/bttv.rst
bulk_remove=off [PPC] This parameter disables the use of the pSeries
......@@ -2251,7 +2251,7 @@
See Documentation/admin-guide/pm/sleep-states.rst.
meye.*= [HW] Set MotionEye Camera parameters
See Documentation/video4linux/meye.txt.
See Documentation/media/v4l-drivers/meye.rst.
mfgpt_irq= [IA-32] Specify the IRQ to use for the
Multi-Function General Purpose Timers on AMD Geode
......@@ -18,7 +18,7 @@ General information
This class of cards has a bt878a as the PCI interface, and require the bttv driver
for accessing the i2c bus and the gpio pins of the bt8xx chipset.
Please see Documentation/dvb/cards.txt => o Cards based on the Conexant Bt8xx PCI bridge:
Please see Documentation/media/dvb-drivers/cards.rst => o Cards based on the Conexant Bt8xx PCI bridge:
Compiling kernel please enable:
......@@ -45,7 +45,7 @@ Loading Modules
Regular case: If the bttv driver detects a bt8xx-based DVB card, all frontend and backend modules will be loaded automatically.
Exceptions are:
- Old TwinHan DST cards or clones with or without CA slot and not containing an Eeprom.
People running udev please see Documentation/dvb/udev.txt.
People running udev please see Documentation/media/dvb-drivers/udev.rst.
In the following cases overriding the PCI type detection for dvb-bt8xx might be necessary:
......@@ -72,7 +72,7 @@ Useful parameters for verbosity level and debugging the dst module:
The autodetected values are determined by the cards' "response string".
In your logs see f. ex.: dst_get_device_id: Recognize [DSTMCI].
For bug reports please send in a complete log with verbose=4 activated.
Please also see Documentation/dvb/ci.txt.
Please also see Documentation/media/dvb-drivers/ci.rst.
Running multiple cards
......@@ -100,7 +100,7 @@ Examples of card ID's:
$ modprobe bttv card=113 card=135
For a full list of card ID's please see Documentation/video4linux/CARDLIST.bttv.
For a full list of card ID's please see Documentation/media/v4l-drivers/bttv-cardlist.rst.
In case of further problems please subscribe and send questions to the mailing list:
Probing the cards with broken PCI subsystem ID
......@@ -431,7 +431,7 @@ MPEG stream.
*Historical context*: This format specification originates from a
custom, embedded, sliced VBI data format used by the ``ivtv`` driver.
This format has already been informally specified in the kernel sources
in the file ``Documentation/video4linux/cx2341x/README.vbi`` . The
in the file ``Documentation/media/v4l-drivers/cx2341x.rst`` . The
maximum size of the payload and other aspects of this format are driven
by the CX23415 MPEG decoder's capabilities and limitations with respect
to extracting, decoding, and displaying sliced VBI data embedded within
......@@ -284,7 +284,7 @@ enum v4l2_mpeg_stream_vbi_fmt -
- VBI in private packets, IVTV format (documented in the kernel
sources in the file
......@@ -52,7 +52,7 @@ please make a proposal on the linux-media mailing list.
` <>`__
The format is documented in the kernel sources in the file
* .. _V4L2-PIX-FMT-CPIA1:
- ``V4L2_PIX_FMT_CPIA1``
......@@ -7,7 +7,7 @@ The MAX2175 driver implements the following driver-specific controls:
Enable/Disable I2S output of the tuner. This is a private control
that can be accessed only using the subdev interface.
Refer to Documentation/media/kapi/v4l2-controls for more details.
Refer to Documentation/media/kapi/v4l2-controls.rst for more details.
.. flat-table::
:header-rows: 0
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment