1. 20 Nov, 2017 1 commit
  2. 16 Nov, 2017 1 commit
  3. 10 Nov, 2017 1 commit
  4. 02 Nov, 2017 1 commit
    • Marc Zyngier's avatar
      irqchip/gic: Deal with broken firmware exposing only 4kB of GICv2 CPU interface · 0962289b
      Marc Zyngier authored
      There is a lot of broken firmware out there that don't really
      expose the information the kernel requires when it comes with dealing
      with GICv2:
      (1) Firmware that only describes the first 4kB of GICv2
      (2) Firmware that describe 128kB of CPU interface, while
          the usable portion of the address space is between
          60 and 68kB
      So far, we only deal with (2). But we have platforms exhibiting
      behaviour (1), resulting in two sub-cases:
      (a) The GIC is occupying 8kB, as required by the GICv2 architecture
      (b) It is actually spread 128kB, and this is likely to be a version
          of (2)
      This patch tries to work around both (a) and (b) by poking at
      the outside of the described memory region, and try to work out
      what is actually there. This is of course unsafe, and should
      only be enabled if there is no way to otherwise fix the DT provided
      by the firmware (we provide a "irqchip.gicv2_force_probe" option
      to that effect).
      Note that for the time being, we restrict ourselves to GICv2
      implementations provided by ARM, since there I have no knowledge
      of an alternative implementations. This could be relaxed if such
      an implementation comes to light on a broken platform.
      Reviewed-by: default avatarChristoffer Dall <cdall@linaro.org>
      Signed-off-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
  5. 31 Oct, 2017 1 commit
  6. 25 Oct, 2017 1 commit
    • Byungchul Park's avatar
      locking/lockdep: Add a boot parameter allowing unwind in cross-release and disable it by default · d141babe
      Byungchul Park authored
      Johan Hovold reported a heavy performance regression caused by lockdep
       > Boot time (from "Linux version" to login prompt) had in fact doubled
       > since 4.13 where it took 17 seconds (with my current config) compared to
       > the 35 seconds I now see with 4.14-rc4.
       > I quick bisect pointed to lockdep and specifically the following commit:
       >	28a903f6 ("locking/lockdep: Handle non(or multi)-acquisition
       >	               of a crosslock")
       > which I've verified is the commit which doubled the boot time (compared
       > to 28a903f6
      ^) (added by lockdep crossrelease series [1]).
      Currently cross-release performs unwind on every acquisition, but that
      is very expensive.
      This patch makes unwind optional and disables it by default and only
      records acquire_ip.
      Full stack traces are sometimes required for full analysis, in which
      case a boot paramter, crossrelease_fullstack, can be specified.
      On my qemu Ubuntu machine (x86_64, 4 cores, 512M), the regression was
      fixed. We measure boot times with 'perf stat --null --repeat 10 $QEMU',
      where $QEMU launches a kernel with init=/bin/true:
      1. No lockdep enabled:
       Performance counter stats for 'qemu_booting_time.sh bzImage' (10 runs):
             2.756558155 seconds time elapsed                    ( +-  0.09% )
      2. Lockdep enabled:
       Performance counter stats for 'qemu_booting_time.sh bzImage' (10 runs):
             2.968710420 seconds time elapsed                    ( +-  0.12% )
      3. Lockdep enabled + cross-release enabled:
       Performance counter stats for 'qemu_booting_time.sh bzImage' (10 runs):
             3.153839636 seconds time elapsed                    ( +-  0.31% )
      4. Lockdep enabled + cross-release enabled + this patch applied:
       Performance counter stats for 'qemu_booting_time.sh bzImage' (10 runs):
             2.963669551 seconds time elapsed                    ( +-  0.11% )
      I.e. lockdep cross-release performance is now indistinguishable from
      vanilla lockdep.
      Bisected-by: default avatarJohan Hovold <johan@kernel.org>
      Analyzed-by: default avatarThomas Gleixner <tglx@linutronix.de>
      Suggested-by: default avatarThomas Gleixner <tglx@linutronix.de>
      Reported-by: default avatarJohan Hovold <johan@kernel.org>
      Signed-off-by: default avatarByungchul Park <byungchul.park@lge.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: amir73il@gmail.com
      Cc: axboe@kernel.dk
      Cc: darrick.wong@oracle.com
      Cc: david@fromorbit.com
      Cc: hch@infradead.org
      Cc: idryomov@gmail.com
      Cc: johannes.berg@intel.com
      Cc: kernel-team@lge.com
      Cc: linux-block@vger.kernel.org
      Cc: linux-fsdevel@vger.kernel.org
      Cc: linux-mm@kvack.org
      Cc: linux-xfs@vger.kernel.org
      Cc: oleg@redhat.com
      Cc: tj@kernel.org
      Link: http://lkml.kernel.org/r/1508921765-15396-5-git-send-email-byungchul.park@lge.com
      Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
  7. 20 Oct, 2017 1 commit
    • Cyril Bur's avatar
      powerpc/tm: Add commandline option to disable hardware transactional memory · 07fd1761
      Cyril Bur authored
      Currently the kernel relies on firmware to inform it whether or not the
      CPU supports HTM and as long as the kernel was built with
      CONFIG_PPC_TRANSACTIONAL_MEM=y then it will allow userspace to make
      use of the facility.
      There may be situations where it would be advantageous for the kernel
      to not allow userspace to use HTM, currently the only way to achieve
      this is to recompile the kernel with CONFIG_PPC_TRANSACTIONAL_MEM=n.
      This patch adds a simple commandline option so that HTM can be
      disabled at boot time.
      Signed-off-by: default avatarCyril Bur <cyrilbur@gmail.com>
      [mpe: Simplify to a bool, move to prom.c, put doco in the right place.
       Always disable, regardless of initial state, to avoid user confusion.]
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
  8. 18 Oct, 2017 1 commit
    • Vasily Gorbik's avatar
      s390: introduce CPU alternatives · 686140a1
      Vasily Gorbik authored
      Implement CPU alternatives, which allows to optionally patch newer
      instructions at runtime, based on CPU facilities availability.
      A new kernel boot parameter "noaltinstr" disables patching.
      Current implementation is derived from x86 alternatives. Although
      ideal instructions padding (when altinstr is longer then oldinstr)
      is added at compile time, and no oldinstr nops optimization has to be
      done at runtime. Also couple of compile time sanity checks are done:
      1. oldinstr and altinstr must be <= 254 bytes long,
      2. oldinstr and altinstr must not have an odd length.
      alternative(oldinstr, altinstr, facility);
      alternative_2(oldinstr, altinstr1, facility1, altinstr2, facility2);
      Both compile time and runtime padding consists of either 6/4/2 bytes nop
      or a jump (brcl) + 2 bytes nop filler if padding is longer then 6 bytes.
      .altinstructions and .altinstr_replacement sections are part of
      __init_begin : __init_end region and are freed after initialization.
      Signed-off-by: default avatarVasily Gorbik <gor@linux.vnet.ibm.com>
      Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
  9. 12 Oct, 2017 3 commits
  10. 10 Oct, 2017 1 commit
  11. 09 Oct, 2017 1 commit
  12. 07 Oct, 2017 1 commit
  13. 03 Oct, 2017 1 commit
  14. 26 Sep, 2017 1 commit
  15. 19 Sep, 2017 1 commit
  16. 07 Sep, 2017 1 commit
    • Michal Hocko's avatar
      mm, page_alloc: rip out ZONELIST_ORDER_ZONE · c9bff3ee
      Michal Hocko authored
      Patch series "cleanup zonelists initialization", v1.
      This is aimed at cleaning up the zonelists initialization code we have
      but the primary motivation was bug report [2] which got resolved but the
      usage of stop_machine is just too ugly to live.  Most patches are
      straightforward but 3 of them need a special consideration.
      Patch 1 removes zone ordered zonelists completely.  I am CCing linux-api
      because this is a user visible change.  As I argue in the patch
      description I do not think we have a strong usecase for it these days.
      I have kept sysctl in place and warn into the log if somebody tries to
      configure zone lists ordering.  If somebody has a real usecase for it we
      can revert this patch but I do not expect anybody will actually notice
      runtime differences.  This patch is not strictly needed for the rest but
      it made patch 6 easier to implement.
      Patch 7 removes stop_machine from build_all_zonelists without adding any
      special synchronization between iterators and updater which I _believe_
      is acceptable as explained in the changelog.  I hope I am not missing
      Patch 8 then removes zonelists_mutex which is kind of ugly as well and
      not really needed AFAICS but a care should be taken when double checking
      my thinking.
      This patch (of 9):
      Supporting zone ordered zonelists costs us just a lot of code while the
      usefulness is arguable if existent at all.  Mel has already made node
      ordering default on 64b systems.  32b systems are still using
      ZONELIST_ORDER_ZONE because it is considered better to fallback to a
      different NUMA node rather than consume precious lowmem zones.
      This argument is, however, weaken by the fact that the memory reclaim
      has been reworked to be node rather than zone oriented.  This means that
      lowmem requests have to skip over all highmem pages on LRUs already and
      so zone ordering doesn't save the reclaim time much.  So the only
      advantage of the zone ordering is under a light memory pressure when
      highmem requests do not ever hit into lowmem zones and the lowmem
      pressure doesn't need to reclaim.
      Considering that 32b NUMA systems are rather suboptimal already and it
      is generally advisable to use 64b kernel on such a HW I believe we
      should rather care about the code maintainability and just get rid of
      ZONELIST_ORDER_ZONE altogether.  Keep systcl in place and warn if
      somebody tries to set zone ordering either from kernel command line or
      the sysctl.
      [mhocko@suse.com: reading vm.numa_zonelist_order will never terminate]
      Link: http://lkml.kernel.org/r/20170721143915.14161-2-mhocko@kernel.org
      Signed-off-by: default avatarMichal Hocko <mhocko@suse.com>
      Acked-by: default avatarMel Gorman <mgorman@suse.de>
      Acked-by: default avatarVlastimil Babka <vbabka@suse.cz>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Joonsoo Kim <js1304@gmail.com>
      Cc: Shaohua Li <shaohua.li@intel.com>
      Cc: Toshi Kani <toshi.kani@hpe.com>
      Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
      Cc: <linux-api@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
  17. 28 Aug, 2017 1 commit
  18. 25 Aug, 2017 1 commit
  19. 09 Aug, 2017 1 commit
    • Heiko Carstens's avatar
      s390/vmcp: make use of contiguous memory allocator · 3f429842
      Heiko Carstens authored
      If memory is fragmented it is unlikely that large order memory
      allocations succeed. This has been an issue with the vmcp device
      driver since a long time, since it requires large physical contiguous
      memory ares for large responses.
      To hopefully resolve this issue make use of the contiguous memory
      allocator (cma). This patch adds a vmcp specific vmcp cma area with a
      default size of 4MB. The size can be changed either via the
      VMCP_CMA_SIZE config option at compile time or with the "vmcp_cma"
      kernel parameter (e.g. "vmcp_cma=16m").
      For any vmcp response buffers larger than 16k memory from the cma area
      will be allocated. If such an allocation fails, there is a fallback to
      the buddy allocator.
      Signed-off-by: default avatarHeiko Carstens <heiko.carstens@de.ibm.com>
      Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
  20. 24 Jul, 2017 1 commit
    • Paul E. McKenney's avatar
      documentation: Fix relation between nohz_full and rcu_nocbs · f99bcb2c
      Paul E. McKenney authored
      If a CPU is specified in the nohz_full= kernel boot parameter to a
      kernel built with CONFIG_NO_HZ_FULL=y, then that CPU's callbacks will
      be offloaded, just as if that CPU had also been specified in the
      rcu_nocbs= kernel boot parameter.  But the current documentation
      states that the user must keep these two boot parameters manually
      synchronized.  This commit therefore updates the documentation to
      reflect reality.
      Signed-off-by: default avatarPaul E. McKenney <paulmck@linux.vnet.ibm.com>
  21. 18 Jul, 2017 1 commit
    • Tom Lendacky's avatar
      x86/cpu/AMD: Document AMD Secure Memory Encryption (SME) · c262f3b9
      Tom Lendacky authored
      Create a Documentation entry to describe the AMD Secure Memory
      Encryption (SME) feature and add documentation for the mem_encrypt=
      kernel parameter.
      Signed-off-by: default avatarTom Lendacky <thomas.lendacky@amd.com>
      Reviewed-by: default avatarThomas Gleixner <tglx@linutronix.de>
      Reviewed-by: default avatarBorislav Petkov <bp@suse.de>
      Cc: Alexander Potapenko <glider@google.com>
      Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Brijesh Singh <brijesh.singh@amd.com>
      Cc: Dave Young <dyoung@redhat.com>
      Cc: Dmitry Vyukov <dvyukov@google.com>
      Cc: Jonathan Corbet <corbet@lwn.net>
      Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      Cc: Larry Woodman <lwoodman@redhat.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Matt Fleming <matt@codeblueprint.co.uk>
      Cc: Michael S. Tsirkin <mst@redhat.com>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Radim Krčmář <rkrcmar@redhat.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Toshimitsu Kani <toshi.kani@hpe.com>
      Cc: kasan-dev@googlegroups.com
      Cc: kvm@vger.kernel.org
      Cc: linux-arch@vger.kernel.org
      Cc: linux-doc@vger.kernel.org
      Cc: linux-efi@vger.kernel.org
      Cc: linux-mm@kvack.org
      Link: http://lkml.kernel.org/r/ca0a0c13b055fd804cfc92cbaca8acd68057eed0.1500319216.git.thomas.lendacky@amd.com
      Signed-off-by: default avatarIngo Molnar <mingo@kernel.org>
  22. 06 Jul, 2017 2 commits
    • Michal Hocko's avatar
      mm, memory_hotplug: drop CONFIG_MOVABLE_NODE · f70029bb
      Michal Hocko authored
      Commit 20b2f52b ("numa: add CONFIG_MOVABLE_NODE for
      movable-dedicated node") has introduced CONFIG_MOVABLE_NODE without a
      good explanation on why it is actually useful.
      It makes a lot of sense to make movable node semantic opt in but we
      already have that because the feature has to be explicitly enabled on
      the kernel command line.  A config option on top only makes the
      configuration space larger without a good reason.  It also adds an
      additional ifdefery that pollutes the code.
      Just drop the config option and make it de-facto always enabled.  This
      shouldn't introduce any change to the semantic.
      Link: http://lkml.kernel.org/r/20170529114141.536-3-mhocko@kernel.org
      Signed-off-by: default avatarMichal Hocko <mhocko@suse.com>
      Acked-by: default avatarReza Arbab <arbab@linux.vnet.ibm.com>
      Acked-by: default avatarVlastimil Babka <vbabka@suse.cz>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: Jerome Glisse <jglisse@redhat.com>
      Cc: Yasuaki Ishimatsu <yasu.isimatu@gmail.com>
      Cc: Xishi Qiu <qiuxishi@huawei.com>
      Cc: Kani Toshimitsu <toshi.kani@hpe.com>
      Cc: Chen Yucong <slaoub@gmail.com>
      Cc: Joonsoo Kim <js1304@gmail.com>
      Cc: Andi Kleen <ak@linux.intel.com>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Daniel Kiper <daniel.kiper@oracle.com>
      Cc: Igor Mammedov <imammedo@redhat.com>
      Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
    • Kees Cook's avatar
      mm: allow slab_nomerge to be set at build time · 7660a6fd
      Kees Cook authored
      Some hardened environments want to build kernels with slab_nomerge
      already set (so that they do not depend on remembering to set the kernel
      command line option).  This is desired to reduce the risk of kernel heap
      overflows being able to overwrite objects from merged caches and changes
      the requirements for cache layout control, increasing the difficulty of
      these attacks.  By keeping caches unmerged, these kinds of exploits can
      usually only damage objects in the same cache (though the risk to
      metadata exploitation is unchanged).
      Link: http://lkml.kernel.org/r/20170620230911.GA25238@beast
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      Cc: Daniel Micay <danielmicay@gmail.com>
      Cc: David Windsor <dave@nullcore.net>
      Cc: Eric Biggers <ebiggers3@gmail.com>
      Cc: Christoph Lameter <cl@linux.com>
      Cc: Jonathan Corbet <corbet@lwn.net>
      Cc: Daniel Micay <danielmicay@gmail.com>
      Cc: David Windsor <dave@nullcore.net>
      Cc: Eric Biggers <ebiggers3@gmail.com>
      Cc: Pekka Enberg <penberg@kernel.org>
      Cc: David Rientjes <rientjes@google.com>
      Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
      Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Ingo Molnar <mingo@kernel.org>
      Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
      Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Andy Lutomirski <luto@kernel.org>
      Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: Daniel Mack <daniel@zonque.org>
      Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
      Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
      Cc: Helge Deller <deller@gmx.de>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: Randy Dunlap <rdunlap@infradead.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
  23. 05 Jul, 2017 1 commit
  24. 22 Jun, 2017 1 commit
  25. 21 Jun, 2017 2 commits
    • Mimi Zohar's avatar
      ima: define a set of appraisal rules requiring file signatures · 503ceaef
      Mimi Zohar authored
      The builtin "ima_appraise_tcb" policy should require file signatures for
      at least a few of the hooks (eg. kernel modules, firmware, and the kexec
      kernel image), but changing it would break the existing userspace/kernel
      This patch defines a new builtin policy named "secure_boot", which
      can be specified on the "ima_policy=" boot command line, independently
      or in conjunction with the "ima_appraise_tcb" policy, by specifing
      ima_policy="appraise_tcb | secure_boot".  The new appraisal rules
      requiring file signatures will be added prior to the "ima_appraise_tcb"
      Signed-off-by: default avatarMimi Zohar <zohar@linux.vnet.ibm.com>
      - Reference secure boot in the new builtin policy name. (Thiago Bauermann)
    • Mimi Zohar's avatar
      ima: extend the "ima_policy" boot command line to support multiple policies · 33ce9549
      Mimi Zohar authored
      Add support for providing multiple builtin policies on the "ima_policy="
      boot command line.  Use "|" as the delimitor separating the policy names.
      Signed-off-by: default avatarMimi Zohar <zohar@linux.vnet.ibm.com>
  26. 20 Jun, 2017 1 commit
  27. 19 Jun, 2017 1 commit
    • Hugh Dickins's avatar
      mm: larger stack guard gap, between vmas · 1be7107f
      Hugh Dickins authored
      Stack guard page is a useful feature to reduce a risk of stack smashing
      into a different mapping. We have been using a single page gap which
      is sufficient to prevent having stack adjacent to a different mapping.
      But this seems to be insufficient in the light of the stack usage in
      userspace. E.g. glibc uses as large as 64kB alloca() in many commonly
      used functions. Others use constructs liks gid_t buffer[NGROUPS_MAX]
      which is 256kB or stack strings with MAX_ARG_STRLEN.
      This will become especially dangerous for suid binaries and the default
      no limit for the stack size limit because those applications can be
      tricked to consume a large portion of the stack and a single glibc call
      could jump over the guard page. These attacks are not theoretical,
      Make those attacks less probable by increasing the stack guard gap
      to 1MB (on systems with 4k pages; but make it depend on the page size
      because systems with larger base pages might cap stack allocations in
      the PAGE_SIZE units) which should cover larger alloca() and VLA stack
      allocations. It is obviously not a full fix because the problem is
      somehow inherent, but it should reduce attack space a lot.
      One could argue that the gap size should be configurable from userspace,
      but that can be done later when somebody finds that the new 1MB is wrong
      for some special case applications.  For now, add a kernel command line
      option (stack_guard_gap) to specify the stack gap size (in page units).
      Implementation wise, first delete all the old code for stack guard page:
      because although we could get away with accounting one extra page in a
      stack vma, accounting a larger gap can break userspace - case in point,
      a program run with "ulimit -S -v 20000" failed when the 1MB gap was
      counted for RLIMIT_AS; similar problems could come with RLIMIT_MLOCK
      and strict non-overcommit mode.
      Instead of keeping gap inside the stack vma, maintain the stack guard
      gap as a gap between vmas: using vm_start_gap() in place of vm_start
      (or vm_end_gap() in place of vm_end if VM_GROWSUP) in just those few
      places which need to respect the gap - mainly arch_get_unmapped_area(),
      and and the vma tree's subtree_gap support for that.
      Original-patch-by: default avatarOleg Nesterov <oleg@redhat.com>
      Original-patch-by: default avatarMichal Hocko <mhocko@suse.com>
      Signed-off-by: default avatarHugh Dickins <hughd@google.com>
      Acked-by: default avatarMichal Hocko <mhocko@suse.com>
      Tested-by: Helge Deller <deller@gmx.de> # parisc
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
  28. 15 Jun, 2017 3 commits
  29. 09 Jun, 2017 3 commits
    • Leo Yan's avatar
      doc: Add coresight_cpu_debug.enable to kernel-parameters.txt · 62a31ce1
      Leo Yan authored
      Add coresight_cpu_debug.enable to kernel-parameters.txt, this flag is
      used to enable/disable the CPU sampling based debugging.
      Signed-off-by: default avatarLeo Yan <leo.yan@linaro.org>
      Signed-off-by: default avatarMathieu Poirier <mathieu.poirier@linaro.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
    • Paul E. McKenney's avatar
      rcu: Remove *_SLOW_* Kconfig options · 90040c9e
      Paul E. McKenney authored
      and RCU_TORTURE_TEST_SLOW_CLEANUP_DELAY Kconfig options are only
      useful for torture testing, and there are the rcutree.gp_cleanup_delay,
      rcutree.gp_init_delay, and rcutree.gp_preinit_delay kernel boot parameters
      that rcutorture can use instead.  The effect of these parameters is to
      artificially slow down grace period initialization and cleanup in order
      to make some types of race conditions happen more often.
      This commit therefore simplifies Tree RCU a bit by removing the Kconfig
      options and adding the corresponding kernel parameters to rcutorture's
      .boot files instead.  However, this commit also leaves out the kernel
      parameters for TREE02, TREE04, and TREE07 in order to have about the
      same number of tests slowed as not slowed.  TREE01, TREE03, TREE05,
      and TREE06 are slowed, and the rest are not slowed.
      Reported-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarPaul E. McKenney <paulmck@linux.vnet.ibm.com>
    • Paul E. McKenney's avatar
      srcu: Prevent sdp->srcu_gp_seq_needed counter wrap · c350c008
      Paul E. McKenney authored
      If a given CPU never happens to ever start an SRCU grace period, the
      grace-period sequence counter might wrap.  If this CPU were to decide to
      finally start a grace period, the state of its sdp->srcu_gp_seq_needed
      might make it appear that it has already requested this grace period,
      which would prevent starting the grace period.  If no other CPU ever started
      a grace period again, this would look like a grace-period hang.  Even
      if some other CPU took pity and started the needed grace period, the
      leaf rcu_node structure's ->srcu_data_have_cbs field won't have record
      of the fact that this CPU has a callback pending, which would look like
      a very localized grace-period hang.
      This might seem very unlikely, but SRCU grace periods can take less than
      a microsecond on small systems, which means that overflow can happen
      in much less than an hour on a 32-bit embedded system.  And embedded
      systems are especially likely to have long-term idle CPUs.  Therefore,
      it makes sense to prevent this scenario from happening.
      This commit therefore scans each srcu_data structure occasionally,
      with frequency controlled by the srcutree.counter_wrap_check kernel
      boot parameter.  This parameter can be set to something like 255
      in order to exercise the counter-wrap-prevention code.
      Signed-off-by: default avatarPaul E. McKenney <paulmck@linux.vnet.ibm.com>
  30. 08 Jun, 2017 2 commits
    • Paul E. McKenney's avatar
      rcuperf: Add writer_holdoff boot parameter · 820687a7
      Paul E. McKenney authored
      This commit adds a writer_holdoff boot parameter to rcuperf, which is
      intended to be used to test Tree SRCU's auto-expediting.  This
      boot parameter is in microseconds, and defaults to zero (that is,
      disabled).  Set it to a bit larger than srcutree.exp_holdoff,
      keeping the nanosecond/microsecond conversion, to force Tree SRCU
      to auto-expedite more aggressively.
      This commit also adds documentation for this parameter, and fixes some
      alphabetization while in the neighborhood.
      Signed-off-by: default avatarPaul E. McKenney <paulmck@linux.vnet.ibm.com>
    • Paul E. McKenney's avatar
      rcuperf: Add ability to performance-test call_rcu() and friends · 881ed593
      Paul E. McKenney authored
      This commit upgrades rcuperf so that it can do performance testing on
      asynchronous grace-period primitives such as call_srcu().  There is
      a new rcuperf.gp_async module parameter that specifies this new behavior,
      with the pre-existing rcuperf.gp_exp testing expedited grace periods such as
      synchronize_rcu_expedited, and with the default being to test synchronous
      non-expedited grace periods such as synchronize_rcu().
      There is also a new rcuperf.gp_async_max module parameter that specifies
      the maximum number of outstanding callbacks per writer kthread, defaulting
      to 1,000.  When this limit is exceeded, the writer thread invokes the
      appropriate flavor of rcu_barrier() to wait for callbacks to drain.
      Signed-off-by: default avatarPaul E. McKenney <paulmck@linux.vnet.ibm.com>
      [ paulmck: Removed the redundant initialization noted by Arnd Bergmann. ]
  31. 01 Jun, 2017 1 commit