Kconfig 92.8 KB
Newer Older
1
# SPDX-License-Identifier: GPL-2.0
Sam Ravnborg's avatar
Sam Ravnborg committed
2
3
# Select 32 or 64 bit
config 64BIT
4
	bool "64-bit kernel" if ARCH = "x86"
5
	default ARCH != "i386"
Ingo Molnar's avatar
Ingo Molnar committed
6
	---help---
Sam Ravnborg's avatar
Sam Ravnborg committed
7
8
9
10
	  Say yes to build a 64-bit kernel - formerly known as x86_64
	  Say no to build a 32-bit kernel - formerly known as i386

config X86_32
11
12
	def_bool y
	depends on !64BIT
13
14
15
16
17
18
19
20
	# Options that are inherently 32-bit kernel only:
	select ARCH_WANT_IPC_PARSE_VERSION
	select CLKSRC_I8253
	select CLONE_BACKWARDS
	select HAVE_AOUT
	select HAVE_GENERIC_DMA_COHERENT
	select MODULES_USE_ELF_REL
	select OLD_SIGACTION
Sam Ravnborg's avatar
Sam Ravnborg committed
21
22

config X86_64
23
24
	def_bool y
	depends on 64BIT
25
	# Options that are inherently 64-bit kernel only:
26
	select ARCH_HAS_GIGANTIC_PAGE if (MEMORY_ISOLATION && COMPACTION) || CMA
27
28
29
30
31
	select ARCH_SUPPORTS_INT128
	select ARCH_USE_CMPXCHG_LOCKREF
	select HAVE_ARCH_SOFT_DIRTY
	select MODULES_USE_ELF_RELA
	select X86_DEV_DMA_OPS
32

33
34
35
36
37
38
#
# Arch settings
#
# ( Note that options that are marked 'if X86_64' could in principle be
#   ported to 32-bit as well. )
#
39
config X86
40
	def_bool y
41
42
43
	#
	# Note: keep this list sorted alphabetically
	#
44
45
46
47
48
	select ACPI_LEGACY_TABLES_LOOKUP	if ACPI
	select ACPI_SYSTEM_POWER_STATES_SUPPORT	if ACPI
	select ANON_INODES
	select ARCH_CLOCKSOURCE_DATA
	select ARCH_DISCARD_MEMBLOCK
49
	select ARCH_HAS_ACPI_TABLE_UPGRADE	if ACPI
50
	select ARCH_HAS_DEBUG_VIRTUAL
51
	select ARCH_HAS_DEVMEM_IS_ALLOWED
52
	select ARCH_HAS_ELF_RANDOMIZE
53
	select ARCH_HAS_FAST_MULTIPLIER
54
	select ARCH_HAS_FORTIFY_SOURCE
55
	select ARCH_HAS_GCOV_PROFILE_ALL
Dmitry Vyukov's avatar
Dmitry Vyukov committed
56
	select ARCH_HAS_KCOV			if X86_64
57
	select ARCH_HAS_PMEM_API		if X86_64
58
	# Causing hangs/crashes, see the commit that added this change for details.
59
	select ARCH_HAS_REFCOUNT
60
	select ARCH_HAS_UACCESS_FLUSHCACHE	if X86_64
61
	select ARCH_HAS_SET_MEMORY
62
	select ARCH_HAS_SG_CHAIN
63
64
	select ARCH_HAS_STRICT_KERNEL_RWX
	select ARCH_HAS_STRICT_MODULE_RWX
65
	select ARCH_HAS_UBSAN_SANITIZE_ALL
66
	select ARCH_HAS_ZONE_DEVICE		if X86_64
67
68
	select ARCH_HAVE_NMI_SAFE_CMPXCHG
	select ARCH_MIGHT_HAVE_ACPI_PDC		if ACPI
69
	select ARCH_MIGHT_HAVE_PC_PARPORT
70
	select ARCH_MIGHT_HAVE_PC_SERIO
71
	select ARCH_SUPPORTS_ATOMIC_RMW
72
	select ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT
73
74
75
76
	select ARCH_SUPPORTS_NUMA_BALANCING	if X86_64
	select ARCH_USE_BUILTIN_BSWAP
	select ARCH_USE_QUEUED_RWLOCKS
	select ARCH_USE_QUEUED_SPINLOCKS
77
	select ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH
78
	select ARCH_WANTS_DYNAMIC_TASK_STRUCT
79
	select ARCH_WANTS_THP_SWAP		if X86_64
80
81
82
83
84
	select BUILDTIME_EXTABLE_SORT
	select CLKEVT_I8253
	select CLOCKSOURCE_VALIDATE_LAST_CYCLE
	select CLOCKSOURCE_WATCHDOG
	select DCACHE_WORD_ACCESS
85
86
	select EDAC_ATOMIC_SCRUB
	select EDAC_SUPPORT
87
88
89
90
91
	select GENERIC_CLOCKEVENTS
	select GENERIC_CLOCKEVENTS_BROADCAST	if X86_64 || (X86_32 && X86_LOCAL_APIC)
	select GENERIC_CLOCKEVENTS_MIN_ADJUST
	select GENERIC_CMOS_UPDATE
	select GENERIC_CPU_AUTOPROBE
92
	select GENERIC_CPU_VULNERABILITIES
Mark Salter's avatar
Mark Salter committed
93
	select GENERIC_EARLY_IOREMAP
94
95
	select GENERIC_FIND_FIRST_BIT
	select GENERIC_IOMAP
96
	select GENERIC_IRQ_EFFECTIVE_AFF_MASK	if SMP
97
	select GENERIC_IRQ_MIGRATION		if SMP
98
99
100
101
102
103
104
	select GENERIC_IRQ_PROBE
	select GENERIC_IRQ_SHOW
	select GENERIC_PENDING_IRQ		if SMP
	select GENERIC_SMP_IDLE_THREAD
	select GENERIC_STRNCPY_FROM_USER
	select GENERIC_STRNLEN_USER
	select GENERIC_TIME_VSYSCALL
105
	select HARDLOCKUP_CHECK_TIMESTAMP	if X86_64
106
107
108
109
110
111
	select HAVE_ACPI_APEI			if ACPI
	select HAVE_ACPI_APEI_NMI		if ACPI
	select HAVE_ALIGNED_STRUCT_PAGE		if SLUB
	select HAVE_ARCH_AUDITSYSCALL
	select HAVE_ARCH_HUGE_VMAP		if X86_64 || X86_PAE
	select HAVE_ARCH_JUMP_LABEL
112
	select HAVE_ARCH_KASAN			if X86_64
113
	select HAVE_ARCH_KGDB
114
115
	select HAVE_ARCH_MMAP_RND_BITS		if MMU
	select HAVE_ARCH_MMAP_RND_COMPAT_BITS	if MMU && COMPAT
116
	select HAVE_ARCH_COMPAT_MMAP_BASES	if MMU && COMPAT
117
118
119
	select HAVE_ARCH_SECCOMP_FILTER
	select HAVE_ARCH_TRACEHOOK
	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
120
	select HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD if X86_64
121
	select HAVE_ARCH_VMAP_STACK		if X86_64
122
	select HAVE_ARCH_WITHIN_STACK_FRAMES
123
124
125
126
	select HAVE_CC_STACKPROTECTOR
	select HAVE_CMPXCHG_DOUBLE
	select HAVE_CMPXCHG_LOCAL
	select HAVE_CONTEXT_TRACKING		if X86_64
127
	select HAVE_COPY_THREAD_TLS
128
	select HAVE_C_RECORDMCOUNT
129
130
131
132
	select HAVE_DEBUG_KMEMLEAK
	select HAVE_DEBUG_STACKOVERFLOW
	select HAVE_DMA_API_DEBUG
	select HAVE_DMA_CONTIGUOUS
133
	select HAVE_DYNAMIC_FTRACE
134
	select HAVE_DYNAMIC_FTRACE_WITH_REGS
135
	select HAVE_EBPF_JIT			if X86_64
136
	select HAVE_EFFICIENT_UNALIGNED_ACCESS
Jiri Slaby's avatar
Jiri Slaby committed
137
	select HAVE_EXIT_THREAD
138
	select HAVE_FENTRY			if X86_64 || DYNAMIC_FTRACE
139
140
141
	select HAVE_FTRACE_MCOUNT_RECORD
	select HAVE_FUNCTION_GRAPH_TRACER
	select HAVE_FUNCTION_TRACER
Emese Revfy's avatar
Emese Revfy committed
142
	select HAVE_GCC_PLUGINS
143
144
145
146
147
	select HAVE_HW_BREAKPOINT
	select HAVE_IDE
	select HAVE_IOREMAP_PROT
	select HAVE_IRQ_EXIT_ON_IRQ_STACK	if X86_64
	select HAVE_IRQ_TIME_ACCOUNTING
148
	select HAVE_KERNEL_BZIP2
149
150
	select HAVE_KERNEL_GZIP
	select HAVE_KERNEL_LZ4
151
	select HAVE_KERNEL_LZMA
152
	select HAVE_KERNEL_LZO
153
154
155
156
157
158
159
160
	select HAVE_KERNEL_XZ
	select HAVE_KPROBES
	select HAVE_KPROBES_ON_FTRACE
	select HAVE_KRETPROBES
	select HAVE_KVM
	select HAVE_LIVEPATCH			if X86_64
	select HAVE_MEMBLOCK
	select HAVE_MEMBLOCK_NODE_MAP
161
	select HAVE_MIXED_BREAKPOINTS_REGS
162
	select HAVE_MOD_ARCH_SPECIFIC
163
	select HAVE_NMI
164
165
166
167
	select HAVE_OPROFILE
	select HAVE_OPTPROBES
	select HAVE_PCSPKR_PLATFORM
	select HAVE_PERF_EVENTS
168
	select HAVE_PERF_EVENTS_NMI
169
	select HAVE_HARDLOCKUP_DETECTOR_PERF	if PERF_EVENTS && HAVE_PERF_EVENTS_NMI
170
	select HAVE_PERF_REGS
171
	select HAVE_PERF_USER_STACK_DUMP
172
	select HAVE_RCU_TABLE_FREE
173
	select HAVE_RCU_TABLE_INVALIDATE	if HAVE_RCU_TABLE_FREE
174
	select HAVE_REGS_AND_STACK_ACCESS_API
175
	select HAVE_RELIABLE_STACKTRACE		if X86_64 && UNWINDER_FRAME_POINTER && STACK_VALIDATION
176
	select HAVE_STACK_VALIDATION		if X86_64
177
178
	select HAVE_SYSCALL_TRACEPOINTS
	select HAVE_UNSTABLE_SCHED_CLOCK
179
	select HAVE_USER_RETURN_NOTIFIER
180
	select HOTPLUG_SMT			if SMP
181
	select IRQ_FORCED_THREADING
182
	select PCI_LOCKLESS_CONFIG
183
	select PERF_EVENTS
184
	select RTC_LIB
185
	select RTC_MC146818_LIB
186
	select SPARSE_IRQ
187
	select SRCU
188
	select SYSCTL_EXCEPTION_TRACE
189
	select THREAD_INFO_IN_TASK
190
191
192
	select USER_STACKTRACE_SUPPORT
	select VIRT_TO_BUS
	select X86_FEATURE_NAMES		if PROC_FS
193

194
config INSTRUCTION_DECODER
195
196
	def_bool y
	depends on KPROBES || PERF_EVENTS || UPROBES
197

198
199
200
201
202
config OUTPUT_FORMAT
	string
	default "elf32-i386" if X86_32
	default "elf64-x86-64" if X86_64

203
config ARCH_DEFCONFIG
204
	string
205
206
	default "arch/x86/configs/i386_defconfig" if X86_32
	default "arch/x86/configs/x86_64_defconfig" if X86_64
207

208
config LOCKDEP_SUPPORT
209
	def_bool y
210
211

config STACKTRACE_SUPPORT
212
	def_bool y
213
214

config MMU
215
	def_bool y
216

217
218
219
220
221
222
223
224
225
226
227
228
229
230
config ARCH_MMAP_RND_BITS_MIN
	default 28 if 64BIT
	default 8

config ARCH_MMAP_RND_BITS_MAX
	default 32 if 64BIT
	default 16

config ARCH_MMAP_RND_COMPAT_BITS_MIN
	default 8

config ARCH_MMAP_RND_COMPAT_BITS_MAX
	default 16

231
232
233
config SBUS
	bool

234
config NEED_DMA_MAP_STATE
235
	def_bool y
236
	depends on X86_64 || INTEL_IOMMU || DMA_API_DEBUG || SWIOTLB
237

238
config NEED_SG_DMA_LENGTH
239
	def_bool y
240

241
config GENERIC_ISA_DMA
242
243
	def_bool y
	depends on ISA_DMA_API
244
245

config GENERIC_BUG
246
	def_bool y
247
	depends on BUG
248
249
250
251
	select GENERIC_BUG_RELATIVE_POINTERS if X86_64

config GENERIC_BUG_RELATIVE_POINTERS
	bool
252
253

config GENERIC_HWEIGHT
254
	def_bool y
255
256

config ARCH_MAY_HAVE_PC_FDC
257
258
	def_bool y
	depends on ISA_DMA_API
259

260
config RWSEM_XCHGADD_ALGORITHM
261
	def_bool y
262
263
264
265

config GENERIC_CALIBRATE_DELAY
	def_bool y

266
267
268
config ARCH_HAS_CPU_RELAX
	def_bool y

269
270
271
config ARCH_HAS_CACHE_LINE_SIZE
	def_bool y

272
config HAVE_SETUP_PER_CPU_AREA
273
	def_bool y
274

275
276
277
278
config NEED_PER_CPU_EMBED_FIRST_CHUNK
	def_bool y

config NEED_PER_CPU_PAGE_FIRST_CHUNK
279
280
	def_bool y

281
282
283
config ARCH_HIBERNATION_POSSIBLE
	def_bool y

Johannes Berg's avatar
Johannes Berg committed
284
285
286
config ARCH_SUSPEND_POSSIBLE
	def_bool y

287
288
289
config ARCH_WANT_HUGE_PMD_SHARE
	def_bool y

290
291
292
config ARCH_WANT_GENERAL_HUGETLB
	def_bool y

293
config ZONE_DMA32
294
	def_bool y if X86_64
295
296

config AUDIT_ARCH
297
	def_bool y if X86_64
298

299
300
301
config ARCH_SUPPORTS_OPTIMIZED_INLINING
	def_bool y

Akinobu Mita's avatar
Akinobu Mita committed
302
303
304
config ARCH_SUPPORTS_DEBUG_PAGEALLOC
	def_bool y

305
306
307
308
309
config KASAN_SHADOW_OFFSET
	hex
	depends on KASAN
	default 0xdffffc0000000000

310
311
config HAVE_INTEL_TXT
	def_bool y
312
	depends on INTEL_IOMMU && ACPI
313

314
315
316
317
318
319
320
321
config X86_32_SMP
	def_bool y
	depends on X86_32 && SMP

config X86_64_SMP
	def_bool y
	depends on X86_64 && SMP

322
323
config X86_32_LAZY_GS
	def_bool y
324
	depends on X86_32 && !CC_STACKPROTECTOR
325

326
327
328
config ARCH_SUPPORTS_UPROBES
	def_bool y

329
330
331
config FIX_EARLYCON_MEM
	def_bool y

332
333
config PGTABLE_LEVELS
	int
334
	default 5 if X86_5LEVEL
335
336
337
338
	default 4 if X86_64
	default 3 if X86_PAE
	default 2

339
source "init/Kconfig"
340
source "kernel/Kconfig.freezer"
341

342
343
menu "Processor type and features"

344
345
346
347
348
349
350
351
352
353
config ZONE_DMA
	bool "DMA memory allocation support" if EXPERT
	default y
	help
	  DMA memory allocation support allows devices with less than 32-bit
	  addressing to allocate within the first 16MB of address space.
	  Disable if no such devices will be used.

	  If unsure, say Y.

354
355
356
357
config SMP
	bool "Symmetric multi-processing support"
	---help---
	  This enables support for systems with more than one CPU. If you have
358
359
	  a system with only one CPU, say N. If you have a system with more
	  than one CPU, say Y.
360

361
	  If you say N here, the kernel will run on uni- and multiprocessor
362
363
	  machines, but will use only one CPU of a multiprocessor machine. If
	  you say Y here, the kernel will run on many, but not all,
364
	  uniprocessor machines. On a uniprocessor machine, the kernel
365
366
367
368
369
370
371
372
373
374
375
	  will run faster if you say N here.

	  Note that if you say Y here and choose architecture "586" or
	  "Pentium" under "Processor family", the kernel will not work on 486
	  architectures. Similarly, multiprocessor kernels for the "PPro"
	  architecture may not work on all Pentium based boards.

	  People using multiprocessor machines who say Y here should also say
	  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
	  Management" code will be disabled if you say Y here.

Paul Bolle's avatar
Paul Bolle committed
376
	  See also <file:Documentation/x86/i386/IO-APIC.txt>,
377
	  <file:Documentation/lockup-watchdogs.txt> and the SMP-HOWTO available at
378
379
380
381
	  <http://www.tldp.org/docs.html#howto>.

	  If you don't know what to do here, say N.

382
383
384
385
386
387
388
389
390
391
392
config X86_FEATURE_NAMES
	bool "Processor feature human-readable names" if EMBEDDED
	default y
	---help---
	  This option compiles in a table of x86 feature bits and corresponding
	  names.  This is required to support /proc/cpuinfo and a few kernel
	  messages.  You can disable this to save space, at the expense of
	  making those few kernel messages show numeric feature bits instead.

	  If in doubt, say Y.

393
394
395
396
397
398
399
400
401
402
403
config X86_FAST_FEATURE_TESTS
	bool "Fast CPU feature tests" if EMBEDDED
	default y
	---help---
	  Some fast-paths in the kernel depend on the capabilities of the CPU.
	  Say Y here for the kernel to patch in the appropriate code at runtime
	  based on the capabilities of the CPU. The infrastructure for patching
	  code at runtime takes up some additional space; space-constrained
	  embedded systems may wish to say N here to produce smaller, slightly
	  slower code.

Yinghai Lu's avatar
Yinghai Lu committed
404
405
config X86_X2APIC
	bool "Support x2apic"
406
	depends on X86_LOCAL_APIC && X86_64 && (IRQ_REMAP || HYPERVISOR_GUEST)
Yinghai Lu's avatar
Yinghai Lu committed
407
408
409
410
411
412
413
414
	---help---
	  This enables x2apic support on CPUs that have this feature.

	  This allows 32-bit apic IDs (so it can support very large systems),
	  and accesses the local apic via MSRs not via mmio.

	  If you don't know what to do here, say N.

415
config X86_MPPARSE
416
	bool "Enable MPS table" if ACPI || SFI
417
	default y
418
	depends on X86_LOCAL_APIC
Ingo Molnar's avatar
Ingo Molnar committed
419
	---help---
420
421
422
	  For old smp systems that do not have proper acpi support. Newer systems
	  (esp with 64bit cpus) with acpi support, MADT and DSDT will override it

423
424
425
config X86_BIGSMP
	bool "Support for big SMP systems with more than 8 CPUs"
	depends on X86_32 && SMP
Ingo Molnar's avatar
Ingo Molnar committed
426
	---help---
427
	  This option is needed for the systems that have more than 8 CPUs
428

429
430
431
432
config GOLDFISH
       def_bool y
       depends on X86_GOLDFISH

433
434
435
config RETPOLINE
	bool "Avoid speculative indirect branches in kernel"
	default y
436
	select STACK_VALIDATION if HAVE_STACK_VALIDATION
437
438
439
440
441
442
	help
	  Compile kernel with the retpoline compiler options to guard against
	  kernel-to-user data leaks by avoiding speculative indirect
	  branches. Requires a compiler with -mindirect-branch=thunk-extern
	  support for full protection. The kernel may run slower.

443
444
config INTEL_RDT
	bool "Intel Resource Director Technology support"
445
446
	default n
	depends on X86 && CPU_SUP_INTEL
447
	select KERNFS
448
	help
449
450
451
452
	  Select to enable resource allocation and monitoring which are
	  sub-features of Intel Resource Director Technology(RDT). More
	  information about RDT can be found in the Intel x86
	  Architecture Software Developer Manual.
453
454
455

	  Say N if unsure.

456
if X86_32
457
458
459
config X86_EXTENDED_PLATFORM
	bool "Support for extended (non-PC) x86 platforms"
	default y
Ingo Molnar's avatar
Ingo Molnar committed
460
	---help---
461
462
463
464
	  If you disable this option then the kernel will only support
	  standard PC platforms. (which covers the vast majority of
	  systems out there.)

465
466
	  If you enable this option then you'll be able to select support
	  for the following (non-PC) 32 bit x86 platforms:
467
		Goldfish (Android emulator)
468
469
470
		AMD Elan
		RDC R-321x SoC
		SGI 320/540 (Visual Workstation)
471
		STA2X11-based (e.g. Northville)
472
		Moorestown MID devices
473
474
475

	  If you have one of these systems, or if you want to build a
	  generic distribution kernel, say Y here - otherwise say N.
476
endif
477

478
479
480
481
482
483
484
485
486
487
488
if X86_64
config X86_EXTENDED_PLATFORM
	bool "Support for extended (non-PC) x86 platforms"
	default y
	---help---
	  If you disable this option then the kernel will only support
	  standard PC platforms. (which covers the vast majority of
	  systems out there.)

	  If you enable this option then you'll be able to select support
	  for the following (non-PC) 64 bit x86 platforms:
Steffen Persvold's avatar
Steffen Persvold committed
489
		Numascale NumaChip
490
491
492
493
494
495
		ScaleMP vSMP
		SGI Ultraviolet

	  If you have one of these systems, or if you want to build a
	  generic distribution kernel, say Y here - otherwise say N.
endif
496
497
# This is an alphabetically sorted list of 64 bit extended platforms
# Please maintain the alphabetic order if and when there are additions
Steffen Persvold's avatar
Steffen Persvold committed
498
499
500
501
502
503
504
config X86_NUMACHIP
	bool "Numascale NumaChip"
	depends on X86_64
	depends on X86_EXTENDED_PLATFORM
	depends on NUMA
	depends on SMP
	depends on X86_X2APIC
505
	depends on PCI_MMCONFIG
Steffen Persvold's avatar
Steffen Persvold committed
506
507
508
509
	---help---
	  Adds support for Numascale NumaChip large-SMP systems. Needed to
	  enable more than ~168 cores.
	  If you don't have one of these, you should say N here.
510

511
512
config X86_VSMP
	bool "ScaleMP vSMP"
513
	select HYPERVISOR_GUEST
514
515
516
	select PARAVIRT
	depends on X86_64 && PCI
	depends on X86_EXTENDED_PLATFORM
517
	depends on SMP
Ingo Molnar's avatar
Ingo Molnar committed
518
	---help---
519
520
521
	  Support for ScaleMP vSMP systems.  Say 'Y' here if this kernel is
	  supposed to run on these EM64T-based machines.  Only choose this option
	  if you have one of these machines.
522

523
524
525
config X86_UV
	bool "SGI Ultraviolet"
	depends on X86_64
526
	depends on X86_EXTENDED_PLATFORM
527
	depends on NUMA
528
	depends on EFI
529
	depends on X86_X2APIC
530
	depends on PCI
Ingo Molnar's avatar
Ingo Molnar committed
531
	---help---
532
533
534
	  This option is needed in order to support SGI Ultraviolet systems.
	  If you don't have one of these, you should say N here.

535
536
# Following is an alphabetically sorted list of 32 bit extended platforms
# Please maintain the alphabetic order if and when there are additions
537

538
539
config X86_GOLDFISH
       bool "Goldfish (Virtual Platform)"
540
       depends on X86_EXTENDED_PLATFORM
541
542
543
544
545
       ---help---
	 Enable support for the Goldfish virtual platform used primarily
	 for Android development. Unless you are building for the Android
	 Goldfish emulator say N here.

546
547
548
549
config X86_INTEL_CE
	bool "CE4100 TV platform"
	depends on PCI
	depends on PCI_GODIRECT
550
	depends on X86_IO_APIC
551
552
	depends on X86_32
	depends on X86_EXTENDED_PLATFORM
553
	select X86_REBOOTFIXUPS
554
555
	select OF
	select OF_EARLY_FLATTREE
556
557
558
559
560
	---help---
	  Select for the Intel CE media processor (CE4100) SOC.
	  This option compiles in support for the CE4100 SOC for settop
	  boxes and media devices.

561
config X86_INTEL_MID
562
563
	bool "Intel MID platform support"
	depends on X86_EXTENDED_PLATFORM
564
	depends on X86_PLATFORM_DEVICES
565
	depends on PCI
566
	depends on X86_64 || (PCI_GOANY && X86_32)
567
	depends on X86_IO_APIC
568
	select SFI
569
	select I2C
570
	select DW_APB_TIMER
571
572
	select APB_TIMER
	select INTEL_SCU_IPC
573
	select MFD_INTEL_MSIC
574
	---help---
575
576
577
	  Select to build a kernel capable of supporting Intel MID (Mobile
	  Internet Device) platform systems which do not have the PCI legacy
	  interfaces. If you are building for a PC class system say N here.
578

579
580
	  Intel MID platforms are based on an Intel processor and chipset which
	  consume less power than most of the x86 derivatives.
581

582
583
584
585
586
587
588
589
590
591
592
config X86_INTEL_QUARK
	bool "Intel Quark platform support"
	depends on X86_32
	depends on X86_EXTENDED_PLATFORM
	depends on X86_PLATFORM_DEVICES
	depends on X86_TSC
	depends on PCI
	depends on PCI_GOANY
	depends on X86_IO_APIC
	select IOSF_MBI
	select INTEL_IMR
593
	select COMMON_CLK
594
595
596
597
598
	---help---
	  Select to include support for Quark X1000 SoC.
	  Say Y here if you have a Quark based system such as the Arduino
	  compatible Intel Galileo.

599
600
config X86_INTEL_LPSS
	bool "Intel Low Power Subsystem Support"
601
	depends on X86 && ACPI
602
	select COMMON_CLK
603
	select PINCTRL
604
	select IOSF_MBI
605
606
607
	---help---
	  Select to build support for Intel Low Power Subsystem such as
	  found on Intel Lynxpoint PCH. Selecting this option enables
608
609
	  things like clock tree (common clock framework) and pincontrol
	  which are needed by the LPSS peripheral drivers.
610

611
612
613
614
615
616
617
618
619
620
621
config X86_AMD_PLATFORM_DEVICE
	bool "AMD ACPI2Platform devices support"
	depends on ACPI
	select COMMON_CLK
	select PINCTRL
	---help---
	  Select to interpret AMD specific ACPI device to platform device
	  such as I2C, UART, GPIO found on AMD Carrizo and later chipsets.
	  I2C and UART depend on COMMON_CLK to set clock. GPIO driver is
	  implemented under PINCTRL subsystem.

622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
config IOSF_MBI
	tristate "Intel SoC IOSF Sideband support for SoC platforms"
	depends on PCI
	---help---
	  This option enables sideband register access support for Intel SoC
	  platforms. On these platforms the IOSF sideband is used in lieu of
	  MSR's for some register accesses, mostly but not limited to thermal
	  and power. Drivers may query the availability of this device to
	  determine if they need the sideband in order to work on these
	  platforms. The sideband is available on the following SoC products.
	  This list is not meant to be exclusive.
	   - BayTrail
	   - Braswell
	   - Quark

	  You should say Y if you are running a kernel on one of these SoC's.

639
640
641
642
643
644
645
646
647
648
649
650
651
config IOSF_MBI_DEBUG
	bool "Enable IOSF sideband access through debugfs"
	depends on IOSF_MBI && DEBUG_FS
	---help---
	  Select this option to expose the IOSF sideband access registers (MCR,
	  MDR, MCRX) through debugfs to write and read register information from
	  different units on the SoC. This is most useful for obtaining device
	  state information for debug and analysis. As this is a general access
	  mechanism, users of this option would have specific knowledge of the
	  device they want to access.

	  If you don't require the option or are in doubt, say N.

652
653
config X86_RDC321X
	bool "RDC R-321x SoC"
654
	depends on X86_32
655
656
657
658
659
660
661
662
	depends on X86_EXTENDED_PLATFORM
	select M486
	select X86_REBOOTFIXUPS
	---help---
	  This option is needed for RDC R-321x system-on-chip, also known
	  as R-8610-(G).
	  If you don't have one of these chips, you should say N here.

663
config X86_32_NON_STANDARD
664
665
	bool "Support non-standard 32-bit SMP architectures"
	depends on X86_32 && SMP
666
	depends on X86_EXTENDED_PLATFORM
Ingo Molnar's avatar
Ingo Molnar committed
667
	---help---
H. Peter Anvin's avatar
H. Peter Anvin committed
668
669
670
671
	  This option compiles in the bigsmp and STA2X11 default
	  subarchitectures.  It is intended for a generic binary
	  kernel. If you select them all, kernel will probe it one by
	  one and will fallback to default.
672

673
# Alphabetically sorted list of Non standard 32 bit platforms
674

675
config X86_SUPPORTS_MEMORY_FAILURE
Jan Beulich's avatar
Jan Beulich committed
676
	def_bool y
677
678
679
680
681
682
683
	# MCE code calls memory_failure():
	depends on X86_MCE
	# On 32-bit this adds too big of NODES_SHIFT and we run out of page flags:
	# On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH:
	depends on X86_64 || !SPARSEMEM
	select ARCH_SUPPORTS_MEMORY_FAILURE

684
685
686
687
688
689
690
config STA2X11
	bool "STA2X11 Companion Chip Support"
	depends on X86_32_NON_STANDARD && PCI
	select X86_DEV_DMA_OPS
	select X86_DMA_REMAP
	select SWIOTLB
	select MFD_STA2X11
691
	select GPIOLIB
692
693
694
695
696
697
698
699
	default n
	---help---
	  This adds support for boards based on the STA2X11 IO-Hub,
	  a.k.a. "ConneXt". The chip is used in place of the standard
	  PC chipset, so all "standard" peripherals are missing. If this
	  option is selected the kernel will still be able to boot on
	  standard PC machines.

700
701
702
703
704
705
706
707
708
709
710
711
712
config X86_32_IRIS
	tristate "Eurobraille/Iris poweroff module"
	depends on X86_32
	---help---
	  The Iris machines from EuroBraille do not have APM or ACPI support
	  to shut themselves down properly.  A special I/O sequence is
	  needed to do so, which is what this module does at
	  kernel shutdown.

	  This is only for Iris machines from EuroBraille.

	  If unused, say N.

713
config SCHED_OMIT_FRAME_POINTER
714
715
	def_bool y
	prompt "Single-depth WCHAN output"
716
	depends on X86
Ingo Molnar's avatar
Ingo Molnar committed
717
	---help---
718
719
720
721
722
723
724
	  Calculate simpler /proc/<PID>/wchan values. If this option
	  is disabled then wchan values will recurse back to the
	  caller function. This provides more accurate wchan values,
	  at the expense of slightly more scheduling overhead.

	  If in doubt, say "Y".

725
726
menuconfig HYPERVISOR_GUEST
	bool "Linux guest support"
Ingo Molnar's avatar
Ingo Molnar committed
727
	---help---
728
729
730
	  Say Y here to enable options for running Linux under various hyper-
	  visors. This option enables basic hypervisor detection and platform
	  setup.
731

732
733
	  If you say N, all options in this submenu will be skipped and
	  disabled, and Linux guest support won't be built in.
734

735
if HYPERVISOR_GUEST
736

737
738
config PARAVIRT
	bool "Enable paravirtualization code"
Ingo Molnar's avatar
Ingo Molnar committed
739
	---help---
740
741
742
743
744
	  This changes the kernel so it can modify itself when it is run
	  under a hypervisor, potentially improving performance significantly
	  over full virtualization.  However, when run without a hypervisor
	  the kernel is theoretically slower and slightly larger.

745
746
747
748
749
750
751
config PARAVIRT_DEBUG
	bool "paravirt-ops debugging"
	depends on PARAVIRT && DEBUG_KERNEL
	---help---
	  Enable to debug paravirt_ops internals.  Specifically, BUG if
	  a paravirt_op is missing when it is called.

752
753
config PARAVIRT_SPINLOCKS
	bool "Paravirtualization layer for spinlocks"
754
	depends on PARAVIRT && SMP
755
756
757
758
759
	---help---
	  Paravirtualized spinlocks allow a pvops backend to replace the
	  spinlock implementation with something virtualization-friendly
	  (for example, block the virtual CPU rather than spinning).

760
761
	  It has a minimal impact on native kernels and gives a nice performance
	  benefit on paravirtualized KVM / Xen kernels.
762

763
	  If you are unsure how to answer this question, answer Y.
764

765
766
config QUEUED_LOCK_STAT
	bool "Paravirt queued spinlock statistics"
767
	depends on PARAVIRT_SPINLOCKS && DEBUG_FS
768
769
770
771
772
	---help---
	  Enable the collection of statistical data on the slowpath
	  behavior of paravirtualized queued spinlocks and report
	  them on debugfs.

773
source "arch/x86/xen/Kconfig"
774

775
776
777
778
779
config KVM_GUEST
	bool "KVM Guest support (including kvmclock)"
	depends on PARAVIRT
	select PARAVIRT_CLOCK
	default y
Ingo Molnar's avatar
Ingo Molnar committed
780
	---help---
781
782
783
784
785
	  This option enables various optimizations for running under the KVM
	  hypervisor. It includes a paravirtualized clock, so that instead
	  of relying on a PIT (or probably other) emulation by the
	  underlying device model, the host provides the guest with
	  timing infrastructure such as time of day, and system time
786

787
788
789
790
791
792
793
794
795
config KVM_DEBUG_FS
	bool "Enable debug information for KVM Guests in debugfs"
	depends on KVM_GUEST && DEBUG_FS
	default n
	---help---
	  This option enables collection of various statistics for KVM guest.
	  Statistics are displayed in debugfs filesystem. Enabling this option
	  may incur significant overhead.

796
797
798
799
config PARAVIRT_TIME_ACCOUNTING
	bool "Paravirtual steal time accounting"
	depends on PARAVIRT
	default n
Ingo Molnar's avatar
Ingo Molnar committed
800
	---help---
801
802
803
804
805
806
807
808
809
	  Select this option to enable fine granularity task steal time
	  accounting. Time spent executing other tasks in parallel with
	  the current vCPU is discounted from the vCPU power. To account for
	  that, there can be a small performance impact.

	  If in doubt, say N here.

config PARAVIRT_CLOCK
	bool
810

811
endif #HYPERVISOR_GUEST
812

813
config NO_BOOTMEM
Yinghai Lu's avatar
Yinghai Lu committed
814
	def_bool y
815

816
817
818
source "arch/x86/Kconfig.cpu"

config HPET_TIMER
819
	def_bool X86_64
820
	prompt "HPET Timer Support" if X86_32
Ingo Molnar's avatar
Ingo Molnar committed
821
822
823
824
825
826
827
	---help---
	  Use the IA-PC HPET (High Precision Event Timer) to manage
	  time in preference to the PIT and RTC, if a HPET is
	  present.
	  HPET is the next generation timer replacing legacy 8254s.
	  The HPET provides a stable time base on SMP
	  systems, unlike the TSC, but it is more expensive to access,
Michael S. Tsirkin's avatar
Michael S. Tsirkin committed
828
829
	  as it is off-chip.  The interface used is documented
	  in the HPET spec, revision 1.
830

Ingo Molnar's avatar
Ingo Molnar committed
831
832
833
	  You can safely choose Y here.  However, HPET will only be
	  activated if the platform and the BIOS support this feature.
	  Otherwise the 8254 will be used for timing services.
834

Ingo Molnar's avatar
Ingo Molnar committed
835
	  Choose N to continue using the legacy 8254 timer.
836
837

config HPET_EMULATE_RTC
838
	def_bool y
839
	depends on HPET_TIMER && (RTC=y || RTC=m || RTC_DRV_CMOS=m || RTC_DRV_CMOS=y)
840

841
config APB_TIMER
842
843
       def_bool y if X86_INTEL_MID
       prompt "Intel MID APB Timer Support" if X86_INTEL_MID
844
       select DW_APB_TIMER
845
       depends on X86_INTEL_MID && SFI
846
847
848
849
850
851
852
       help
         APB timer is the replacement for 8254, HPET on X86 MID platforms.
         The APBT provides a stable time base on SMP
         systems, unlike the TSC, but it is more expensive to access,
         as it is off-chip. APB timers are always running regardless of CPU
         C states, they are used as per CPU clockevent device when possible.

853
# Mark as expert because too many people got it wrong.
854
# The code disables itself when not needed.
855
856
config DMI
	default y
857
	select DMI_SCAN_MACHINE_NON_EFI_FALLBACK
858
	bool "Enable DMI scanning" if EXPERT
Ingo Molnar's avatar
Ingo Molnar committed
859
	---help---
860
861
862
863
864
	  Enabled scanning of DMI to identify machine quirks. Say Y
	  here unless you have verified that your setup is not
	  affected by entries in the DMI blacklist. Required by PNP
	  BIOS code.

865
config GART_IOMMU
866
	bool "Old AMD GART IOMMU support"
867
	select SWIOTLB
868
	depends on X86_64 && PCI && AMD_NB
Ingo Molnar's avatar
Ingo Molnar committed
869
	---help---
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
	  Provides a driver for older AMD Athlon64/Opteron/Turion/Sempron
	  GART based hardware IOMMUs.

	  The GART supports full DMA access for devices with 32-bit access
	  limitations, on systems with more than 3 GB. This is usually needed
	  for USB, sound, many IDE/SATA chipsets and some other devices.

	  Newer systems typically have a modern AMD IOMMU, supported via
	  the CONFIG_AMD_IOMMU=y config option.

	  In normal configurations this driver is only active when needed:
	  there's more than 3 GB of memory and the system contains a
	  32-bit limited device.

	  If unsure, say Y.
885
886
887
888

config CALGARY_IOMMU
	bool "IBM Calgary IOMMU support"
	select SWIOTLB
889
	depends on X86_64 && PCI
Ingo Molnar's avatar
Ingo Molnar committed
890
	---help---
891
892
893
894
895
896
897
898
899
900
901
902
903
904
	  Support for hardware IOMMUs in IBM's xSeries x366 and x460
	  systems. Needed to run systems with more than 3GB of memory
	  properly with 32-bit PCI devices that do not support DAC
	  (Double Address Cycle). Calgary also supports bus level
	  isolation, where all DMAs pass through the IOMMU.  This
	  prevents them from going anywhere except their intended
	  destination. This catches hard-to-find kernel bugs and
	  mis-behaving drivers and devices that do not use the DMA-API
	  properly to set up their DMA buffers.  The IOMMU can be
	  turned off at boot time with the iommu=off parameter.
	  Normally the kernel will make the right choice by itself.
	  If unsure, say Y.

config CALGARY_IOMMU_ENABLED_BY_DEFAULT
905
906
	def_bool y
	prompt "Should Calgary be enabled by default?"
907
	depends on CALGARY_IOMMU
Ingo Molnar's avatar
Ingo Molnar committed
908
	---help---
909
910
911
912
913
914
915
916
	  Should Calgary be enabled by default? if you choose 'y', Calgary
	  will be used (if it exists). If you choose 'n', Calgary will not be
	  used even if it exists. If you choose 'n' and would like to use
	  Calgary anyway, pass 'iommu=calgary' on the kernel command line.
	  If unsure, say Y.

# need this always selected by IOMMU for the VIA workaround
config SWIOTLB
917
	def_bool y if X86_64
Ingo Molnar's avatar
Ingo Molnar committed
918
	---help---
919
	  Support for software bounce buffers used on x86-64 systems
920
921
922
923
	  which don't have a hardware IOMMU. Using this PCI devices
	  which can only access 32-bits of memory can be used on systems
	  with more than 3 GB of memory.
	  If unsure, say Y.
924

925
config IOMMU_HELPER
926
927
	def_bool y
	depends on CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU
928

929
config MAXSMP
930
	bool "Enable Maximum number of SMP Processors and NUMA Nodes"
931
	depends on X86_64 && SMP && DEBUG_KERNEL
Mike Travis's avatar
Mike Travis committed
932
	select CPUMASK_OFFSTACK
Ingo Molnar's avatar
Ingo Molnar committed
933
	---help---
934
	  Enable maximum number of CPUS and NUMA Nodes for this architecture.
935
	  If unsure, say N.
936
937

config NR_CPUS
Mike Travis's avatar
Mike Travis committed
938
	int "Maximum number of CPUs" if SMP && !MAXSMP
939
	range 2 8 if SMP && X86_32 && !X86_BIGSMP
940
941
	range 2 64 if SMP && X86_32 && X86_BIGSMP
	range 2 512 if SMP && !MAXSMP && !CPUMASK_OFFSTACK && X86_64
942
	range 2 8192 if SMP && !MAXSMP && CPUMASK_OFFSTACK && X86_64
943
	default "1" if !SMP
944
	default "8192" if MAXSMP
H. Peter Anvin's avatar
H. Peter Anvin committed
945
	default "32" if SMP && X86_BIGSMP
946
947
	default "8" if SMP && X86_32
	default "64" if SMP
Ingo Molnar's avatar
Ingo Molnar committed
948
	---help---
949
	  This allows you to specify the maximum number of CPUs which this
950
	  kernel will support.  If CPUMASK_OFFSTACK is enabled, the maximum
951
	  supported value is 8192, otherwise the maximum value is 512.  The
952
953
954
955
956
957
	  minimum value which makes sense is 2.

	  This is purely to save memory - each supported CPU adds
	  approximately eight kilobytes to the kernel image.

config SCHED_SMT
958
	def_bool y if SMP
959
960

config SCHED_MC
961
962
	def_bool y
	prompt "Multi-core scheduler support"
Borislav Petkov's avatar
Borislav Petkov committed
963
	depends on SMP
Ingo Molnar's avatar
Ingo Molnar committed
964
	---help---
965
966
967
968
	  Multi-core scheduler support improves the CPU scheduler's decision
	  making when dealing with multi-core CPU chips at a cost of slightly
	  increased overhead in some places. If unsure say N here.

969
970
config SCHED_MC_PRIO
	bool "CPU core priorities scheduler support"
971
972
973
	depends on SCHED_MC && CPU_SUP_INTEL
	select X86_INTEL_PSTATE
	select CPU_FREQ
974
	default y
975
	---help---
976
977
978
979
	  Intel Turbo Boost Max Technology 3.0 enabled CPUs have a
	  core ordering determined at manufacturing time, which allows
	  certain cores to reach higher turbo frequencies (when running
	  single threaded workloads) than others.
980

981
982
983
984
	  Enabling this kernel feature teaches the scheduler about
	  the TBM3 (aka ITMT) priority order of the CPU cores and adjusts the
	  scheduler's CPU selection logic accordingly, so that higher
	  overall system performance can be achieved.
985

986
	  This feature will have no effect on CPUs without this feature.
987

988
	  If unsure say Y here.
989

990
991
source "kernel/Kconfig.preempt"

Thomas Gleixner's avatar
Thomas Gleixner committed
992
993
config UP_LATE_INIT
       def_bool y
994
       depends on !SMP && X86_LOCAL_APIC
Thomas Gleixner's avatar
Thomas Gleixner committed
995

996
config X86_UP_APIC
997
998
	bool "Local APIC support on uniprocessors" if !PCI_MSI
	default PCI_MSI
999
	depends on X86_32 && !SMP && !X86_32_NON_STANDARD
Ingo Molnar's avatar
Ingo Molnar committed
1000
	---help---
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
	  A local APIC (Advanced Programmable Interrupt Controller) is an
	  integrated interrupt controller in the CPU. If you have a single-CPU
	  system which has a processor with a local APIC, you can say Y here to
	  enable and use it. If you say Y here even though your machine doesn't
	  have a local APIC, then the kernel will still run with no slowdown at
	  all. The local APIC supports CPU-generated self-interrupts (timer,
	  performance counters), and the NMI watchdog which detects hard
	  lockups.

config X86_UP_IOAPIC
	bool "IO-APIC support on uniprocessors"
	depends on X86_UP_APIC
Ingo Molnar's avatar
Ingo Molnar committed
1013
	---help---
1014
1015
1016
1017
1018
1019
1020
1021
1022
	  An IO-APIC (I/O Advanced Programmable Interrupt Controller) is an
	  SMP-capable replacement for PC-style interrupt controllers. Most
	  SMP systems and many recent uniprocessor systems have one.

	  If you have a single-CPU system with an IO-APIC, you can say Y here
	  to use it. If you say Y here even though your machine doesn't have
	  an IO-APIC, then the kernel will still run with no slowdown at all.

config X86_LOCAL_APIC
1023
	def_bool y
1024
	depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC || PCI_MSI
1025
	select IRQ_DOMAIN_HIERARCHY
1026
	select PCI_MSI_IRQ_DOMAIN if PCI_MSI
1027
1028

config X86_IO_APIC
1029
1030
	def_bool y
	depends on X86_LOCAL_APIC || X86_UP_IOAPIC
1031

1032
1033
1034
config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
	bool "Reroute for broken boot IRQs"
	depends on X86_IO_APIC
Ingo Molnar's avatar
Ingo Molnar committed
1035
	---help---
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
	  This option enables a workaround that fixes a source of
	  spurious interrupts. This is recommended when threaded
	  interrupt handling is used on systems where the generation of
	  superfluous "boot interrupts" cannot be disabled.

	  Some chipsets generate a legacy INTx "boot IRQ" when the IRQ
	  entry in the chipset's IO-APIC is masked (as, e.g. the RT
	  kernel does during interrupt handling). On chipsets where this
	  boot IRQ generation cannot be disabled, this workaround keeps
	  the original IRQ line masked so that only the equivalent "boot
	  IRQ" is delivered to the CPUs. The workaround also tells the
	  kernel to set up the IRQ handler on the boot IRQ line. In this
	  way only one interrupt is delivered to the kernel. Otherwise
	  the spurious second interrupt may cause the kernel to bring
	  down (vital) interrupt lines.

	  Only affects "broken" chipsets. Interrupt sharing may be
	  increased on these systems.

1055
config X86_MCE
1056
	bool "Machine Check / overheating reporting"
1057
	select GENERIC_ALLOCATOR
1058
	default y
1059
	---help---
1060
1061
	  Machine Check support allows the processor to notify the
	  kernel if it detects a problem (e.g. overheating, data corruption).
1062
	  The action the kernel takes depends on the severity of the problem,
1063
	  ranging from warning messages to halting the machine.
1064

1065
1066
1067
1068
1069
1070
1071
1072
config X86_MCELOG_LEGACY
	bool "Support for deprecated /dev/mcelog character device"
	depends on X86_MCE
	---help---
	  Enable support for /dev/mcelog which is needed by the old mcelog
	  userspace logging daemon. Consider switching to the new generation
	  rasdaemon solution.

1073
config X86_MCE_INTEL
1074
1075
	def_bool y
	prompt "Intel MCE features"
1076
	depends on X86_MCE && X86_LOCAL_APIC
Ingo Molnar's avatar
Ingo Molnar committed
1077
	---help---
1078
1079
1080
1081
	   Additional support for intel specific MCE features such as
	   the thermal monitor.

config X86_MCE_AMD
1082
1083
	def_bool y
	prompt "AMD MCE features"
1084
	depends on X86_MCE && X86_LOCAL_APIC && AMD_NB
Ingo Molnar's avatar
Ingo Molnar committed
1085
	---help---
1086
1087
1088
	   Additional support for AMD specific MCE features such as
	   the DRAM Error Threshold.

1089
config X86_ANCIENT_MCE
Jan Beulich's avatar
Jan Beulich committed
1090
	bool "Support for old Pentium 5 / WinChip machine checks"
1091
	depends on X86_32 && X86_MCE
1092
1093
	---help---
	  Include support for machine check handling on old Pentium 5 or WinChip
Masanari Iida's avatar
Masanari Iida committed
1094
	  systems. These typically need to be enabled explicitly on the command
1095
	  line.
1096

1097
1098
config X86_MCE_THRESHOLD
	depends on X86_MCE_AMD || X86_MCE_INTEL
Jan Beulich's avatar
Jan Beulich committed
1099
	def_bool y
1100

1101
config X86_MCE_INJECT
1102
	depends on X86_MCE && X86_LOCAL_APIC && DEBUG_FS
1103
1104
1105
1106
1107
1108
	tristate "Machine check injector support"
	---help---
	  Provide support for injecting machine checks for testing purposes.
	  If you don't know what a machine check is and you don't do kernel
	  QA it is safe to say n.

1109
1110
config X86_THERMAL_VECTOR
	def_bool y
1111
	depends on X86_MCE_INTEL
1112

1113
source "arch/x86/events/Kconfig"