st_kim.c 24.4 KB
Newer Older
1
2
3
4
/*
 *  Shared Transport Line discipline driver Core
 *	Init Manager module responsible for GPIO control
 *	and firmware download
5
6
 *  Copyright (C) 2009-2010 Texas Instruments
 *  Author: Pavan Savoy <pavan_savoy@ti.com>
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License version 2 as
 *  published by the Free Software Foundation.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 *
 */

#define pr_fmt(fmt) "(stk) :" fmt
#include <linux/platform_device.h>
#include <linux/jiffies.h>
#include <linux/firmware.h>
#include <linux/delay.h>
#include <linux/wait.h>
#include <linux/gpio.h>
30
31
#include <linux/debugfs.h>
#include <linux/seq_file.h>
32
#include <linux/sched.h>
Randy Dunlap's avatar
Randy Dunlap committed
33
#include <linux/sysfs.h>
34
#include <linux/tty.h>
35

36
#include <linux/skbuff.h>
37
#include <linux/ti_wilink_st.h>
38
#include <linux/module.h>
39

40

41
#define MAX_ST_DEVICES	3	/* Imagine 1 on each UART for now */
42
static struct platform_device *st_kim_devices[MAX_ST_DEVICES];
43
44
45
46

/**********************************************************************/
/* internal functions */

47
48
49
50
51
52
53
54
55
56
57
58
59
/**
 * st_get_plat_device -
 *	function which returns the reference to the platform device
 *	requested by id. As of now only 1 such device exists (id=0)
 *	the context requesting for reference can get the id to be
 *	requested by a. The protocol driver which is registering or
 *	b. the tty device which is opened.
 */
static struct platform_device *st_get_plat_device(int id)
{
	return st_kim_devices[id];
}

60
61
62
63
64
/**
 * validate_firmware_response -
 *	function to return whether the firmware response was proper
 *	in case of error don't complete so that waiting for proper
 *	response times out
65
 */
66
static void validate_firmware_response(struct kim_data_s *kim_gdata)
67
{
68
	struct sk_buff *skb = kim_gdata->rx_skb;
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
	if (!skb)
		return;

	/* these magic numbers are the position in the response buffer which
	 * allows us to distinguish whether the response is for the read
	 * version info. command
	 */
	if (skb->data[2] == 0x01 && skb->data[3] == 0x01 &&
			skb->data[4] == 0x10 && skb->data[5] == 0x00) {
		/* fw version response */
		memcpy(kim_gdata->resp_buffer,
				kim_gdata->rx_skb->data,
				kim_gdata->rx_skb->len);
		complete_all(&kim_gdata->kim_rcvd);
		kim_gdata->rx_state = ST_W4_PACKET_TYPE;
		kim_gdata->rx_skb = NULL;
		kim_gdata->rx_count = 0;
	} else if (unlikely(skb->data[5] != 0)) {
87
88
		pr_err("no proper response during fw download");
		pr_err("data6 %x", skb->data[5]);
89
		kfree_skb(skb);
90
91
92
93
94
95
96
97
98
99
		return;		/* keep waiting for the proper response */
	}
	/* becos of all the script being downloaded */
	complete_all(&kim_gdata->kim_rcvd);
	kfree_skb(skb);
}

/* check for data len received inside kim_int_recv
 * most often hit the last case to update state to waiting for data
 */
100
static inline int kim_check_data_len(struct kim_data_s *kim_gdata, int len)
101
102
103
{
	register int room = skb_tailroom(kim_gdata->rx_skb);

104
	pr_debug("len %d room %d", len, room);
105
106

	if (!len) {
107
		validate_firmware_response(kim_gdata);
108
109
110
111
112
113
114
115
116
117
118
	} else if (len > room) {
		/* Received packet's payload length is larger.
		 * We can't accommodate it in created skb.
		 */
		pr_err("Data length is too large len %d room %d", len,
			   room);
		kfree_skb(kim_gdata->rx_skb);
	} else {
		/* Packet header has non-zero payload length and
		 * we have enough space in created skb. Lets read
		 * payload data */
119
		kim_gdata->rx_state = ST_W4_DATA;
120
121
122
123
124
125
126
127
128
129
130
131
132
		kim_gdata->rx_count = len;
		return len;
	}

	/* Change ST LL state to continue to process next
	 * packet */
	kim_gdata->rx_state = ST_W4_PACKET_TYPE;
	kim_gdata->rx_skb = NULL;
	kim_gdata->rx_count = 0;

	return 0;
}

133
134
135
136
137
/**
 * kim_int_recv - receive function called during firmware download
 *	firmware download responses on different UART drivers
 *	have been observed to come in bursts of different
 *	tty_receive and hence the logic
138
 */
139
static void kim_int_recv(struct kim_data_s *kim_gdata,
140
	const unsigned char *data, long count)
141
{
142
143
	const unsigned char *ptr;
	int len = 0, type = 0;
144
	unsigned char *plen;
145

146
	pr_debug("%s", __func__);
147
	/* Decode received bytes here */
148
	ptr = data;
149
150
151
152
	if (unlikely(ptr == NULL)) {
		pr_err(" received null from TTY ");
		return;
	}
153

154
155
156
157
158
159
160
161
162
163
164
165
166
167
	while (count) {
		if (kim_gdata->rx_count) {
			len = min_t(unsigned int, kim_gdata->rx_count, count);
			memcpy(skb_put(kim_gdata->rx_skb, len), ptr, len);
			kim_gdata->rx_count -= len;
			count -= len;
			ptr += len;

			if (kim_gdata->rx_count)
				continue;

			/* Check ST RX state machine , where are we? */
			switch (kim_gdata->rx_state) {
				/* Waiting for complete packet ? */
168
			case ST_W4_DATA:
169
				pr_debug("Complete pkt received");
170
				validate_firmware_response(kim_gdata);
171
172
173
174
				kim_gdata->rx_state = ST_W4_PACKET_TYPE;
				kim_gdata->rx_skb = NULL;
				continue;
				/* Waiting for Bluetooth event header ? */
175
176
177
178
179
			case ST_W4_HEADER:
				plen =
				(unsigned char *)&kim_gdata->rx_skb->data[1];
				pr_debug("event hdr: plen 0x%02x\n", *plen);
				kim_check_data_len(kim_gdata, *plen);
180
181
182
183
184
				continue;
			}	/* end of switch */
		}		/* end of if rx_state */
		switch (*ptr) {
			/* Bluetooth event packet? */
185
186
187
188
		case 0x04:
			kim_gdata->rx_state = ST_W4_HEADER;
			kim_gdata->rx_count = 2;
			type = *ptr;
189
190
191
192
193
194
			break;
		default:
			pr_info("unknown packet");
			ptr++;
			count--;
			continue;
195
		}
196
197
198
		ptr++;
		count--;
		kim_gdata->rx_skb =
199
			alloc_skb(1024+8, GFP_ATOMIC);
200
201
202
203
204
		if (!kim_gdata->rx_skb) {
			pr_err("can't allocate mem for new packet");
			kim_gdata->rx_state = ST_W4_PACKET_TYPE;
			kim_gdata->rx_count = 0;
			return;
205
		}
206
207
208
209
		skb_reserve(kim_gdata->rx_skb, 8);
		kim_gdata->rx_skb->cb[0] = 4;
		kim_gdata->rx_skb->cb[1] = 0;

210
	}
211
212
213
	return;
}

214
static long read_local_version(struct kim_data_s *kim_gdata, char *bts_scr_name)
215
216
{
	unsigned short version = 0, chip = 0, min_ver = 0, maj_ver = 0;
217
	const char read_ver_cmd[] = { 0x01, 0x01, 0x10, 0x00 };
218

219
	pr_debug("%s", __func__);
220
221
222
223

	INIT_COMPLETION(kim_gdata->kim_rcvd);
	if (4 != st_int_write(kim_gdata->core_data, read_ver_cmd, 4)) {
		pr_err("kim: couldn't write 4 bytes");
224
		return -EIO;
225
226
	}

227
228
	if (!wait_for_completion_interruptible_timeout(
		&kim_gdata->kim_rcvd, msecs_to_jiffies(CMD_RESP_TIME))) {
229
		pr_err(" waiting for ver info- timed out ");
230
		return -ETIMEDOUT;
231
	}
232
	INIT_COMPLETION(kim_gdata->kim_rcvd);
233
234
235
	/* the positions 12 & 13 in the response buffer provide with the
	 * chip, major & minor numbers
	 */
236
237

	version =
238
239
		MAKEWORD(kim_gdata->resp_buffer[12],
				kim_gdata->resp_buffer[13]);
240
241
242
243
244
245
246
247
	chip = (version & 0x7C00) >> 10;
	min_ver = (version & 0x007F);
	maj_ver = (version & 0x0380) >> 7;

	if (version & 0x8000)
		maj_ver |= 0x0008;

	sprintf(bts_scr_name, "TIInit_%d.%d.%d.bts", chip, maj_ver, min_ver);
248
249
250
251
252
253
254

	/* to be accessed later via sysfs entry */
	kim_gdata->version.full = version;
	kim_gdata->version.chip = chip;
	kim_gdata->version.maj_ver = maj_ver;
	kim_gdata->version.min_ver = min_ver;

255
	pr_info("%s", bts_scr_name);
256
	return 0;
257
258
}

259
static void skip_change_remote_baud(unsigned char **ptr, long *len)
260
261
262
263
264
265
266
267
268
269
270
{
	unsigned char *nxt_action, *cur_action;
	cur_action = *ptr;

	nxt_action = cur_action + sizeof(struct bts_action) +
		((struct bts_action *) cur_action)->size;

	if (((struct bts_action *) nxt_action)->type != ACTION_WAIT_EVENT) {
		pr_err("invalid action after change remote baud command");
	} else {
		*ptr = *ptr + sizeof(struct bts_action) +
271
			((struct bts_action *)cur_action)->size;
272
		*len = *len - (sizeof(struct bts_action) +
273
				((struct bts_action *)cur_action)->size);
274
275
276
277
278
		/* warn user on not commenting these in firmware */
		pr_warn("skipping the wait event of change remote baud");
	}
}

279
280
281
282
/**
 * download_firmware -
 *	internal function which parses through the .bts firmware
 *	script file intreprets SEND, DELAY actions only as of now
283
 */
284
static long download_firmware(struct kim_data_s *kim_gdata)
285
{
286
	long err = 0;
287
	long len = 0;
288
289
	unsigned char *ptr = NULL;
	unsigned char *action_ptr = NULL;
290
	unsigned char bts_scr_name[30] = { 0 };	/* 30 char long bts scr name? */
291
292
293
	int wr_room_space;
	int cmd_size;
	unsigned long timeout;
294

295
	err = read_local_version(kim_gdata, bts_scr_name);
296
	if (err != 0) {
297
298
299
300
301
302
303
304
305
306
		pr_err("kim: failed to read local ver");
		return err;
	}
	err =
	    request_firmware(&kim_gdata->fw_entry, bts_scr_name,
			     &kim_gdata->kim_pdev->dev);
	if (unlikely((err != 0) || (kim_gdata->fw_entry->data == NULL) ||
		     (kim_gdata->fw_entry->size == 0))) {
		pr_err(" request_firmware failed(errno %ld) for %s", err,
			   bts_scr_name);
307
		return -EINVAL;
308
309
310
311
312
313
314
315
316
317
	}
	ptr = (void *)kim_gdata->fw_entry->data;
	len = kim_gdata->fw_entry->size;
	/* bts_header to remove out magic number and
	 * version
	 */
	ptr += sizeof(struct bts_header);
	len -= sizeof(struct bts_header);

	while (len > 0 && ptr) {
318
		pr_debug(" action size %d, type %d ",
319
320
321
322
323
			   ((struct bts_action *)ptr)->size,
			   ((struct bts_action *)ptr)->type);

		switch (((struct bts_action *)ptr)->type) {
		case ACTION_SEND_COMMAND:	/* action send */
324
			pr_debug("S");
325
326
327
328
329
330
			action_ptr = &(((struct bts_action *)ptr)->data[0]);
			if (unlikely
			    (((struct hci_command *)action_ptr)->opcode ==
			     0xFF36)) {
				/* ignore remote change
				 * baud rate HCI VS command */
331
				pr_warn("change remote baud"
332
				    " rate command in firmware");
333
				skip_change_remote_baud(&ptr, &len);
334
335
				break;
			}
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
			/*
			 * Make sure we have enough free space in uart
			 * tx buffer to write current firmware command
			 */
			cmd_size = ((struct bts_action *)ptr)->size;
			timeout = jiffies + msecs_to_jiffies(CMD_WR_TIME);
			do {
				wr_room_space =
					st_get_uart_wr_room(kim_gdata->core_data);
				if (wr_room_space < 0) {
					pr_err("Unable to get free "
							"space info from uart tx buffer");
					release_firmware(kim_gdata->fw_entry);
					return wr_room_space;
				}
				mdelay(1); /* wait 1ms before checking room */
			} while ((wr_room_space < cmd_size) &&
					time_before(jiffies, timeout));

			/* Timeout happened ? */
			if (time_after_eq(jiffies, timeout)) {
				pr_err("Timeout while waiting for free "
						"free space in uart tx buffer");
				release_firmware(kim_gdata->fw_entry);
				return -ETIMEDOUT;
			}
362
363
364
365
			/* reinit completion before sending for the
			 * relevant wait
			 */
			INIT_COMPLETION(kim_gdata->kim_rcvd);
366

367
368
369
370
371
			/*
			 * Free space found in uart buffer, call st_int_write
			 * to send current firmware command to the uart tx
			 * buffer.
			 */
372
373
374
375
376
			err = st_int_write(kim_gdata->core_data,
			((struct bts_action_send *)action_ptr)->data,
					   ((struct bts_action *)ptr)->size);
			if (unlikely(err < 0)) {
				release_firmware(kim_gdata->fw_entry);
377
				return err;
378
			}
379
380
381
382
383
384
385
386
387
388
389
390
391
			/*
			 * Check number of bytes written to the uart tx buffer
			 * and requested command write size
			 */
			if (err != cmd_size) {
				pr_err("Number of bytes written to uart "
						"tx buffer are not matching with "
						"requested cmd write size");
				release_firmware(kim_gdata->fw_entry);
				return -EIO;
			}
			break;
		case ACTION_WAIT_EVENT:  /* wait */
392
			pr_debug("W");
393
394
395
			if (!wait_for_completion_interruptible_timeout(
					&kim_gdata->kim_rcvd,
					msecs_to_jiffies(CMD_RESP_TIME))) {
396
				pr_err("response timeout during fw download ");
397
398
				/* timed out */
				release_firmware(kim_gdata->fw_entry);
399
				return -ETIMEDOUT;
400
			}
401
			INIT_COMPLETION(kim_gdata->kim_rcvd);
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
			break;
		case ACTION_DELAY:	/* sleep */
			pr_info("sleep command in scr");
			action_ptr = &(((struct bts_action *)ptr)->data[0]);
			mdelay(((struct bts_action_delay *)action_ptr)->msec);
			break;
		}
		len =
		    len - (sizeof(struct bts_action) +
			   ((struct bts_action *)ptr)->size);
		ptr =
		    ptr + sizeof(struct bts_action) +
		    ((struct bts_action *)ptr)->size;
	}
	/* fw download complete */
	release_firmware(kim_gdata->fw_entry);
418
	return 0;
419
420
421
422
423
424
425
426
427
428
429
}

/**********************************************************************/
/* functions called from ST core */
/* called from ST Core, when REG_IN_PROGRESS (registration in progress)
 * can be because of
 * 1. response to read local version
 * 2. during send/recv's of firmware download
 */
void st_kim_recv(void *disc_data, const unsigned char *data, long count)
{
430
431
432
	struct st_data_s	*st_gdata = (struct st_data_s *)disc_data;
	struct kim_data_s	*kim_gdata = st_gdata->kim_data;

433
434
435
436
	/* proceed to gather all data and distinguish read fw version response
	 * from other fw responses when data gathering is complete
	 */
	kim_int_recv(kim_gdata, data, count);
437
438
439
440
441
442
	return;
}

/* to signal completion of line discipline installation
 * called from ST Core, upon tty_open
 */
443
void st_kim_complete(void *kim_data)
444
{
445
	struct kim_data_s	*kim_gdata = (struct kim_data_s *)kim_data;
446
447
448
	complete(&kim_gdata->ldisc_installed);
}

449
450
451
452
453
454
455
/**
 * st_kim_start - called from ST Core upon 1st registration
 *	This involves toggling the chip enable gpio, reading
 *	the firmware version from chip, forming the fw file name
 *	based on the chip version, requesting the fw, parsing it
 *	and perform download(send/recv).
 */
456
long st_kim_start(void *kim_data)
457
{
458
	long err = 0;
459
	long retry = POR_RETRY_COUNT;
460
	struct ti_st_plat_data	*pdata;
461
462
	struct kim_data_s	*kim_gdata = (struct kim_data_s *)kim_data;

463
	pr_info(" %s", __func__);
464
	pdata = kim_gdata->kim_pdev->dev.platform_data;
465
466

	do {
467
468
469
470
		/* platform specific enabling code here */
		if (pdata->chip_enable)
			pdata->chip_enable(kim_gdata);

471
472
473
474
475
		/* Configure BT nShutdown to HIGH state */
		gpio_set_value(kim_gdata->nshutdown, GPIO_LOW);
		mdelay(5);	/* FIXME: a proper toggle */
		gpio_set_value(kim_gdata->nshutdown, GPIO_HIGH);
		mdelay(100);
476
477
		/* re-initialize the completion */
		INIT_COMPLETION(kim_gdata->ldisc_installed);
478
479
480
481
482
		/* send notification to UIM */
		kim_gdata->ldisc_install = 1;
		pr_info("ldisc_install = 1");
		sysfs_notify(&kim_gdata->kim_pdev->dev.kobj,
				NULL, "install");
483
		/* wait for ldisc to be installed */
484
485
		err = wait_for_completion_interruptible_timeout(
			&kim_gdata->ldisc_installed, msecs_to_jiffies(LDISC_TIME));
486
487
488
489
490
		if (!err) {
			/* ldisc installation timeout,
			 * flush uart, power cycle BT_EN */
			pr_err("ldisc installation timeout");
			err = st_kim_stop(kim_gdata);
491
492
493
			continue;
		} else {
			/* ldisc installed now */
494
			pr_info("line discipline installed");
495
			err = download_firmware(kim_gdata);
496
			if (err != 0) {
497
498
				/* ldisc installed but fw download failed,
				 * flush uart & power cycle BT_EN */
499
				pr_err("download firmware failed");
500
				err = st_kim_stop(kim_gdata);
501
502
503
504
505
506
507
508
509
				continue;
			} else {	/* on success don't retry */
				break;
			}
		}
	} while (retry--);
	return err;
}

510
/**
511
512
513
514
515
516
 * st_kim_stop - stop communication with chip.
 *	This can be called from ST Core/KIM, on the-
 *	(a) last un-register when chip need not be powered there-after,
 *	(b) upon failure to either install ldisc or download firmware.
 *	The function is responsible to (a) notify UIM about un-installation,
 *	(b) flush UART if the ldisc was installed.
517
518
 *	(c) reset BT_EN - pull down nshutdown at the end.
 *	(d) invoke platform's chip disabling routine.
519
 */
520
long st_kim_stop(void *kim_data)
521
{
522
	long err = 0;
523
	struct kim_data_s	*kim_gdata = (struct kim_data_s *)kim_data;
524
525
	struct ti_st_plat_data	*pdata =
		kim_gdata->kim_pdev->dev.platform_data;
526
	struct tty_struct	*tty = kim_gdata->core_data->tty;
527
528

	INIT_COMPLETION(kim_gdata->ldisc_installed);
529

530
531
532
533
534
535
	if (tty) {	/* can be called before ldisc is installed */
		/* Flush any pending characters in the driver and discipline. */
		tty_ldisc_flush(tty);
		tty_driver_flush_buffer(tty);
		tty->ops->flush_buffer(tty);
	}
536
537
538
539
540

	/* send uninstall notification to UIM */
	pr_info("ldisc_install = 0");
	kim_gdata->ldisc_install = 0;
	sysfs_notify(&kim_gdata->kim_pdev->dev.kobj, NULL, "install");
541
542

	/* wait for ldisc to be un-installed */
543
544
	err = wait_for_completion_interruptible_timeout(
		&kim_gdata->ldisc_installed, msecs_to_jiffies(LDISC_TIME));
545
546
	if (!err) {		/* timeout */
		pr_err(" timed out waiting for ldisc to be un-installed");
547
		err = -ETIMEDOUT;
548
549
	}

550
551
552
553
554
555
556
	/* By default configure BT nShutdown to LOW state */
	gpio_set_value(kim_gdata->nshutdown, GPIO_LOW);
	mdelay(1);
	gpio_set_value(kim_gdata->nshutdown, GPIO_HIGH);
	mdelay(1);
	gpio_set_value(kim_gdata->nshutdown, GPIO_LOW);

557
558
559
	/* platform specific disable */
	if (pdata->chip_disable)
		pdata->chip_disable(kim_gdata);
560
561
562
563
564
	return err;
}

/**********************************************************************/
/* functions called from subsystems */
565
/* called when debugfs entry is read from */
566

567
static int show_version(struct seq_file *s, void *unused)
568
{
569
570
	struct kim_data_s *kim_gdata = (struct kim_data_s *)s->private;
	seq_printf(s, "%04X %d.%d.%d\n", kim_gdata->version.full,
571
572
			kim_gdata->version.chip, kim_gdata->version.maj_ver,
			kim_gdata->version.min_ver);
573
	return 0;
574
575
}

576
static int show_list(struct seq_file *s, void *unused)
577
{
578
579
580
	struct kim_data_s *kim_gdata = (struct kim_data_s *)s->private;
	kim_st_list_protocols(kim_gdata->core_data, s);
	return 0;
581
582
}

583
584
static ssize_t show_install(struct device *dev,
		struct device_attribute *attr, char *buf)
585
{
586
587
588
	struct kim_data_s *kim_data = dev_get_drvdata(dev);
	return sprintf(buf, "%d\n", kim_data->ldisc_install);
}
589

590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
#ifdef DEBUG
static ssize_t store_dev_name(struct device *dev,
		struct device_attribute *attr, const char *buf, size_t count)
{
	struct kim_data_s *kim_data = dev_get_drvdata(dev);
	pr_debug("storing dev name >%s<", buf);
	strncpy(kim_data->dev_name, buf, count);
	pr_debug("stored dev name >%s<", kim_data->dev_name);
	return count;
}

static ssize_t store_baud_rate(struct device *dev,
		struct device_attribute *attr, const char *buf, size_t count)
{
	struct kim_data_s *kim_data = dev_get_drvdata(dev);
	pr_debug("storing baud rate >%s<", buf);
	sscanf(buf, "%ld", &kim_data->baud_rate);
	pr_debug("stored baud rate >%ld<", kim_data->baud_rate);
	return count;
}
#endif	/* if DEBUG */

612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
static ssize_t show_dev_name(struct device *dev,
		struct device_attribute *attr, char *buf)
{
	struct kim_data_s *kim_data = dev_get_drvdata(dev);
	return sprintf(buf, "%s\n", kim_data->dev_name);
}

static ssize_t show_baud_rate(struct device *dev,
		struct device_attribute *attr, char *buf)
{
	struct kim_data_s *kim_data = dev_get_drvdata(dev);
	return sprintf(buf, "%ld\n", kim_data->baud_rate);
}

static ssize_t show_flow_cntrl(struct device *dev,
		struct device_attribute *attr, char *buf)
{
	struct kim_data_s *kim_data = dev_get_drvdata(dev);
	return sprintf(buf, "%d\n", kim_data->flow_cntrl);
631
632
}

633
634
635
636
637
/* structures specific for sysfs entries */
static struct kobj_attribute ldisc_install =
__ATTR(install, 0444, (void *)show_install, NULL);

static struct kobj_attribute uart_dev_name =
638
639
640
#ifdef DEBUG	/* TODO: move this to debug-fs if possible */
__ATTR(dev_name, 0644, (void *)show_dev_name, (void *)store_dev_name);
#else
641
__ATTR(dev_name, 0444, (void *)show_dev_name, NULL);
642
#endif
643
644

static struct kobj_attribute uart_baud_rate =
645
646
647
#ifdef DEBUG	/* TODO: move to debugfs */
__ATTR(baud_rate, 0644, (void *)show_baud_rate, (void *)store_baud_rate);
#else
648
__ATTR(baud_rate, 0444, (void *)show_baud_rate, NULL);
649
#endif
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665

static struct kobj_attribute uart_flow_cntrl =
__ATTR(flow_cntrl, 0444, (void *)show_flow_cntrl, NULL);

static struct attribute *uim_attrs[] = {
	&ldisc_install.attr,
	&uart_dev_name.attr,
	&uart_baud_rate.attr,
	&uart_flow_cntrl.attr,
	NULL,
};

static struct attribute_group uim_attr_grp = {
	.attrs = uim_attrs,
};

666
667
668
669
670
671
672
/**
 * st_kim_ref - reference the core's data
 *	This references the per-ST platform device in the arch/xx/
 *	board-xx.c file.
 *	This would enable multiple such platform devices to exist
 *	on a given platform
 */
673
void st_kim_ref(struct st_data_s **core_data, int id)
674
{
675
676
677
	struct platform_device	*pdev;
	struct kim_data_s	*kim_gdata;
	/* get kim_gdata reference from platform device */
678
	pdev = st_get_plat_device(id);
679
680
681
682
	if (!pdev) {
		*core_data = NULL;
		return;
	}
683
	kim_gdata = dev_get_drvdata(&pdev->dev);
684
685
686
	*core_data = kim_gdata->core_data;
}

687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
static int kim_version_open(struct inode *i, struct file *f)
{
	return single_open(f, show_version, i->i_private);
}

static int kim_list_open(struct inode *i, struct file *f)
{
	return single_open(f, show_list, i->i_private);
}

static const struct file_operations version_debugfs_fops = {
	/* version info */
	.open = kim_version_open,
	.read = seq_read,
	.llseek = seq_lseek,
	.release = single_release,
};
static const struct file_operations list_debugfs_fops = {
	/* protocols info */
	.open = kim_list_open,
	.read = seq_read,
	.llseek = seq_lseek,
	.release = single_release,
};

712
713
714
715
716
717
/**********************************************************************/
/* functions called from platform device driver subsystem
 * need to have a relevant platform device entry in the platform's
 * board-*.c file
 */

718
static struct dentry *kim_debugfs_dir;
719
720
static int kim_probe(struct platform_device *pdev)
{
721
	struct kim_data_s	*kim_gdata;
722
	struct ti_st_plat_data	*pdata = pdev->dev.platform_data;
723
	int err;
724

725
726
727
728
	if ((pdev->id != -1) && (pdev->id < MAX_ST_DEVICES)) {
		/* multiple devices could exist */
		st_kim_devices[pdev->id] = pdev;
	} else {
Lucas De Marchi's avatar
Lucas De Marchi committed
729
		/* platform's sure about existence of 1 device */
730
731
732
		st_kim_devices[0] = pdev;
	}

733
734
735
736
737
738
	kim_gdata = kzalloc(sizeof(struct kim_data_s), GFP_ATOMIC);
	if (!kim_gdata) {
		pr_err("no mem to allocate");
		return -ENOMEM;
	}
	dev_set_drvdata(&pdev->dev, kim_gdata);
739

740
741
	err = st_core_init(&kim_gdata->core_data);
	if (err != 0) {
742
		pr_err(" ST core init failed");
743
744
		err = -EIO;
		goto err_core_init;
745
	}
746
747
	/* refer to itself */
	kim_gdata->core_data->kim_data = kim_gdata;
748

749
750
751
752
753
754
755
756
757
758
759
760
761
762
	/* Claim the chip enable nShutdown gpio from the system */
	kim_gdata->nshutdown = pdata->nshutdown_gpio;
	err = gpio_request(kim_gdata->nshutdown, "kim");
	if (unlikely(err)) {
		pr_err(" gpio %ld request failed ", kim_gdata->nshutdown);
		return err;
	}

	/* Configure nShutdown GPIO as output=0 */
	err = gpio_direction_output(kim_gdata->nshutdown, 0);
	if (unlikely(err)) {
		pr_err(" unable to configure gpio %ld", kim_gdata->nshutdown);
		return err;
	}
763
764
765
766
767
	/* get reference of pdev for request_firmware
	 */
	kim_gdata->kim_pdev = pdev;
	init_completion(&kim_gdata->kim_rcvd);
	init_completion(&kim_gdata->ldisc_installed);
768

769
770
	err = sysfs_create_group(&pdev->dev.kobj, &uim_attr_grp);
	if (err) {
771
		pr_err("failed to create sysfs entries");
772
		goto err_sysfs_group;
773
	}
774

775
776
777
778
779
780
	/* copying platform data */
	strncpy(kim_gdata->dev_name, pdata->dev_name, UART_DEV_NAME_LEN);
	kim_gdata->flow_cntrl = pdata->flow_cntrl;
	kim_gdata->baud_rate = pdata->baud_rate;
	pr_info("sysfs entries created\n");

781
782
783
	kim_debugfs_dir = debugfs_create_dir("ti-st", NULL);
	if (IS_ERR(kim_debugfs_dir)) {
		pr_err(" debugfs entries creation failed ");
784
785
		err = -EIO;
		goto err_debugfs_dir;
786
	}
787
788
789
790
791
792

	debugfs_create_file("version", S_IRUGO, kim_debugfs_dir,
				kim_gdata, &version_debugfs_fops);
	debugfs_create_file("protocols", S_IRUGO, kim_debugfs_dir,
				kim_gdata, &list_debugfs_fops);
	pr_info(" debugfs entries created ");
793
	return 0;
794
795
796
797
798
799
800
801
802
803
804

err_debugfs_dir:
	sysfs_remove_group(&pdev->dev.kobj, &uim_attr_grp);

err_sysfs_group:
	st_core_exit(kim_gdata->core_data);

err_core_init:
	kfree(kim_gdata);

	return err;
805
806
807
808
}

static int kim_remove(struct platform_device *pdev)
{
809
810
	/* free the GPIOs requested */
	struct ti_st_plat_data	*pdata = pdev->dev.platform_data;
811
812
813
	struct kim_data_s	*kim_gdata;

	kim_gdata = dev_get_drvdata(&pdev->dev);
814

815
816
817
818
819
820
	/* Free the Bluetooth/FM/GPIO
	 * nShutdown gpio from the system
	 */
	gpio_free(pdata->nshutdown_gpio);
	pr_info("nshutdown GPIO Freed");

821
	debugfs_remove_recursive(kim_debugfs_dir);
822
	sysfs_remove_group(&pdev->dev.kobj, &uim_attr_grp);
823
824
	pr_info("sysfs entries removed");

825
826
	kim_gdata->kim_pdev = NULL;
	st_core_exit(kim_gdata->core_data);
827
828
829

	kfree(kim_gdata);
	kim_gdata = NULL;
830
	return 0;
831
832
}

833
static int kim_suspend(struct platform_device *pdev, pm_message_t state)
834
835
836
837
838
839
840
841
842
{
	struct ti_st_plat_data	*pdata = pdev->dev.platform_data;

	if (pdata->suspend)
		return pdata->suspend(pdev, state);

	return -EOPNOTSUPP;
}

843
static int kim_resume(struct platform_device *pdev)
844
845
846
847
848
849
850
851
852
{
	struct ti_st_plat_data	*pdata = pdev->dev.platform_data;

	if (pdata->resume)
		return pdata->resume(pdev);

	return -EOPNOTSUPP;
}

853
854
/**********************************************************************/
/* entry point for ST KIM module, called in from ST Core */
855
856
857
858
859
860
861
862
863
864
static struct platform_driver kim_platform_driver = {
	.probe = kim_probe,
	.remove = kim_remove,
	.suspend = kim_suspend,
	.resume = kim_resume,
	.driver = {
		.name = "kim",
		.owner = THIS_MODULE,
	},
};
865

866
module_platform_driver(kim_platform_driver);
867
868
869
870

MODULE_AUTHOR("Pavan Savoy <pavan_savoy@ti.com>");
MODULE_DESCRIPTION("Shared Transport Driver for TI BT/FM/GPS combo chips ");
MODULE_LICENSE("GPL");