Commit 146a5e3c authored by Takashi Sakamoto's avatar Takashi Sakamoto Committed by Takashi Iwai
Browse files

ALSA: bebob: add Digidesign Mbox 2 Pro support

This device is based on DM1000E, and BeBoB version 1 firmware is

$ cat /proc/asound/cards
 0 [Pro            ]: BeBoB - Mbox 2 Pro
                      DIGIDESIGN Mbox 2 Pro (id:1, rev:1),
		      GUID 00a07e0100a90000 at fw1.0, S400

$ cat /proc/asound/Pro/firewire/firmware
Manufacturer:	bridgeCo
Protocol Ver:	1
Build Ver:		0
GUID:		0x00A07E0100A90000
Model ID:		0x01
Model Rev:		1
Firmware Date:	20071031
Firmware Time:	034402
Firmware ID:	0xA9
Firmware Ver:	16777215
Base Addr:		0x20080000
Max Size:		1572864
Loader Date:	20051207
Loader Time:	205554

With this patch, ALSA BeBoB driver can start packet streaming to/from
this model, while as a default, internal multiplexer of this model is
not initialized and generates no sound even if the driver transfers
any packets with PCM samples. To hear any sounds from this model,
userspace applications should be developed to set parameters to the
internal multiplexer. You can see raw information in FFADO website:

Signed-off-by: default avatarTakashi Sakamoto <>
Signed-off-by: default avatarTakashi Iwai <>
parent a9007054
......@@ -114,6 +114,7 @@ config SND_BEBOB
* M-Audio FireWire410/AudioPhile/Solo
* M-Audio Ozonic/NRV10/ProfireLightBridge
* M-Audio FireWire 1814/ProjectMix IO
* Digidesign Mbox 2 Pro
To compile this driver as a module, choose M here: the module
will be called snd-bebob.
......@@ -57,6 +57,7 @@ static DECLARE_BITMAP(devices_used, SNDRV_CARDS);
#define VEN_FOCUSRITE 0x0000130e
#define VEN_MAUDIO1 0x00000d6c
#define VEN_MAUDIO2 0x000007f5
#define VEN_DIGIDESIGN 0x00a07e
......@@ -433,6 +434,8 @@ static const struct ieee1394_device_id bebob_id_table[] = {
/* M-Audio ProjectMix */
/* Digidesign Mbox 2 Pro */
SND_BEBOB_DEV_ENTRY(VEN_DIGIDESIGN, 0x0000a9, &spec_normal),
/* IDs are unknown but able to be supported */
/* Apogee, Mini-ME Firewire */
/* Apogee, Mini-DAC Firewire */
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment