Commit 25985edc authored by Lucas De Marchi's avatar Lucas De Marchi

Fix common misspellings

Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: default avatarLucas De Marchi <lucas.demarchi@profusion.mobi>
parent 6aba74f2

Too many changes to show.

To preserve performance only 1000 of 1000+ files are displayed.
...@@ -1677,7 +1677,7 @@ W: http://www.codemonkey.org.uk ...@@ -1677,7 +1677,7 @@ W: http://www.codemonkey.org.uk
D: Assorted VIA x86 support. D: Assorted VIA x86 support.
D: 2.5 AGPGART overhaul. D: 2.5 AGPGART overhaul.
D: CPUFREQ maintenance. D: CPUFREQ maintenance.
D: Fedora kernel maintainence. D: Fedora kernel maintenance.
D: Misc/Other. D: Misc/Other.
S: 314 Littleton Rd, Westford, MA 01886, USA S: 314 Littleton Rd, Westford, MA 01886, USA
...@@ -3211,7 +3211,7 @@ N: James Simmons ...@@ -3211,7 +3211,7 @@ N: James Simmons
E: jsimmons@infradead.org E: jsimmons@infradead.org
E: jsimmons@users.sf.net E: jsimmons@users.sf.net
D: Frame buffer device maintainer D: Frame buffer device maintainer
D: input layer developement D: input layer development
D: tty/console layer D: tty/console layer
D: various mipsel devices D: various mipsel devices
S: 115 Carmel Avenue S: 115 Carmel Avenue
...@@ -3290,7 +3290,7 @@ S: USA ...@@ -3290,7 +3290,7 @@ S: USA
N: Manfred Spraul N: Manfred Spraul
E: manfred@colorfullife.com E: manfred@colorfullife.com
W: http://www.colorfullife.com/~manfred W: http://www.colorfullife.com/~manfred
D: Lots of tiny hacks. Larger improvments to SysV IPC msg, D: Lots of tiny hacks. Larger improvements to SysV IPC msg,
D: slab, pipe, select. D: slab, pipe, select.
S: 71701 Schwieberdingen S: 71701 Schwieberdingen
S: Germany S: Germany
......
...@@ -29,7 +29,7 @@ Contact: Cornelia Huck <cornelia.huck@de.ibm.com> ...@@ -29,7 +29,7 @@ Contact: Cornelia Huck <cornelia.huck@de.ibm.com>
linux-s390@vger.kernel.org linux-s390@vger.kernel.org
Description: Contains the PIM/PAM/POM values, as reported by the Description: Contains the PIM/PAM/POM values, as reported by the
channel subsystem when last queried by the common I/O channel subsystem when last queried by the common I/O
layer (this implies that this attribute is not neccessarily layer (this implies that this attribute is not necessarily
in sync with the values current in the channel subsystem). in sync with the values current in the channel subsystem).
Note: This is an I/O-subchannel specific attribute. Note: This is an I/O-subchannel specific attribute.
Users: s390-tools, HAL Users: s390-tools, HAL
...@@ -33,5 +33,5 @@ Contact: Richard Purdie <rpurdie@rpsys.net> ...@@ -33,5 +33,5 @@ Contact: Richard Purdie <rpurdie@rpsys.net>
Description: Description:
Invert the LED on/off state. This parameter is specific to Invert the LED on/off state. This parameter is specific to
gpio and backlight triggers. In case of the backlight trigger, gpio and backlight triggers. In case of the backlight trigger,
it is usefull when driving a LED which is intended to indicate it is useful when driving a LED which is intended to indicate
a device in a standby like state. a device in a standby like state.
...@@ -40,7 +40,7 @@ ...@@ -40,7 +40,7 @@
<para>Central frequency of the channel.</para> <para>Central frequency of the channel.</para>
<para>For ISDB-T the channels are usally transmitted with an offset of 143kHz. E.g. a <para>For ISDB-T the channels are usually transmitted with an offset of 143kHz. E.g. a
valid frequncy could be 474143 kHz. The stepping is bound to the bandwidth of valid frequncy could be 474143 kHz. The stepping is bound to the bandwidth of
the channel which is 6MHz.</para> the channel which is 6MHz.</para>
......
...@@ -139,7 +139,7 @@ consistently to the DiSEqC commands as described in the DiSEqC spec.</para> ...@@ -139,7 +139,7 @@ consistently to the DiSEqC commands as described in the DiSEqC spec.</para>
<section id="frontend_sec_tone"> <section id="frontend_sec_tone">
<title>SEC continuous tone</title> <title>SEC continuous tone</title>
<para>The continous 22KHz tone is usually used with non-DiSEqC capable LNBs to switch the <para>The continuous 22KHz tone is usually used with non-DiSEqC capable LNBs to switch the
high/low band of a dual-band LNB. When using DiSEqC epuipment this voltage has to high/low band of a dual-band LNB. When using DiSEqC epuipment this voltage has to
be switched consistently to the DiSEqC commands as described in the DiSEqC be switched consistently to the DiSEqC commands as described in the DiSEqC
spec.</para> spec.</para>
......
...@@ -1763,7 +1763,7 @@ as it would be on UP. ...@@ -1763,7 +1763,7 @@ as it would be on UP.
There is a furthur optimization possible here: remember our original There is a furthur optimization possible here: remember our original
cache code, where there were no reference counts and the caller simply cache code, where there were no reference counts and the caller simply
held the lock whenever using the object? This is still possible: if held the lock whenever using the object? This is still possible: if
you hold the lock, noone can delete the object, so you don't need to you hold the lock, no one can delete the object, so you don't need to
get and put the reference count. get and put the reference count.
</para> </para>
......
...@@ -1032,7 +1032,7 @@ and other resources, etc. ...@@ -1032,7 +1032,7 @@ and other resources, etc.
<listitem> <listitem>
<para> <para>
This is indicated by ICRC bit in the ERROR register and This is indicated by ICRC bit in the ERROR register and
means that corruption occurred during data transfer. Upto means that corruption occurred during data transfer. Up to
ATA/ATAPI-7, the standard specifies that this bit is only ATA/ATAPI-7, the standard specifies that this bit is only
applicable to UDMA transfers but ATA/ATAPI-8 draft revision applicable to UDMA transfers but ATA/ATAPI-8 draft revision
1f says that the bit may be applicable to multiword DMA and 1f says that the bit may be applicable to multiword DMA and
...@@ -1045,10 +1045,10 @@ and other resources, etc. ...@@ -1045,10 +1045,10 @@ and other resources, etc.
<term>ABRT error during data transfer or on completion</term> <term>ABRT error during data transfer or on completion</term>
<listitem> <listitem>
<para> <para>
Upto ATA/ATAPI-7, the standard specifies that ABRT could be Up to ATA/ATAPI-7, the standard specifies that ABRT could be
set on ICRC errors and on cases where a device is not able set on ICRC errors and on cases where a device is not able
to complete a command. Combined with the fact that MWDMA to complete a command. Combined with the fact that MWDMA
and PIO transfer errors aren't allowed to use ICRC bit upto and PIO transfer errors aren't allowed to use ICRC bit up to
ATA/ATAPI-7, it seems to imply that ABRT bit alone could ATA/ATAPI-7, it seems to imply that ABRT bit alone could
indicate tranfer errors. indicate tranfer errors.
</para> </para>
...@@ -1122,7 +1122,7 @@ and other resources, etc. ...@@ -1122,7 +1122,7 @@ and other resources, etc.
<para> <para>
Depending on commands, not all STATUS/ERROR bits are Depending on commands, not all STATUS/ERROR bits are
applicable. These non-applicable bits are marked with applicable. These non-applicable bits are marked with
&quot;na&quot; in the output descriptions but upto ATA/ATAPI-7 &quot;na&quot; in the output descriptions but up to ATA/ATAPI-7
no definition of &quot;na&quot; can be found. However, no definition of &quot;na&quot; can be found. However,
ATA/ATAPI-8 draft revision 1f describes &quot;N/A&quot; as ATA/ATAPI-8 draft revision 1f describes &quot;N/A&quot; as
follows. follows.
...@@ -1507,7 +1507,7 @@ and other resources, etc. ...@@ -1507,7 +1507,7 @@ and other resources, etc.
<listitem> <listitem>
<para> <para>
CHS set up with INITIALIZE DEVICE PARAMETERS (seldomly used) CHS set up with INITIALIZE DEVICE PARAMETERS (seldom used)
</para> </para>
</listitem> </listitem>
......
...@@ -485,7 +485,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip) ...@@ -485,7 +485,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
Reed-Solomon library. Reed-Solomon library.
</para> </para>
<para> <para>
The ECC bytes must be placed immidiately after the data The ECC bytes must be placed immediately after the data
bytes in order to make the syndrome generator work. This bytes in order to make the syndrome generator work. This
is contrary to the usual layout used by software ECC. The is contrary to the usual layout used by software ECC. The
separation of data and out of band area is not longer separation of data and out of band area is not longer
...@@ -629,7 +629,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip) ...@@ -629,7 +629,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
holds the bad block table. Store a pointer to the pattern holds the bad block table. Store a pointer to the pattern
in the pattern field. Further the length of the pattern has to be in the pattern field. Further the length of the pattern has to be
stored in len and the offset in the spare area must be given stored in len and the offset in the spare area must be given
in the offs member of the nand_bbt_descr stucture. For mirrored in the offs member of the nand_bbt_descr structure. For mirrored
bad block tables different patterns are mandatory.</para></listitem> bad block tables different patterns are mandatory.</para></listitem>
<listitem><para>Table creation</para> <listitem><para>Table creation</para>
<para>Set the option NAND_BBT_CREATE to enable the table creation <para>Set the option NAND_BBT_CREATE to enable the table creation
...@@ -648,7 +648,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip) ...@@ -648,7 +648,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
<listitem><para>Table version control</para> <listitem><para>Table version control</para>
<para>Set the option NAND_BBT_VERSION to enable the table version control. <para>Set the option NAND_BBT_VERSION to enable the table version control.
It's highly recommended to enable this for mirrored tables with write It's highly recommended to enable this for mirrored tables with write
support. It makes sure that the risk of loosing the bad block