Commit 2bcfa6f6 authored by Michael Chan's avatar Michael Chan Committed by David S. Miller
Browse files

bnxt_en: Check hardware resources before enabling NTUPLE.



The hardware resources required to enable NTUPLE varies depending on
how many rx channels are configured.  We need to make sure we have the
resources before we enable NTUPLE.  Add bnxt_rfs_capable() to do the
checking.

In addition, we need to do the same checking in ndo_fix_features().  As
the rx channels are changed using ethtool -L, we call
netdev_update_features() to make the necessary adjustment for NTUPLE.

Calling netdev_update_features() in netif_running() state but before
calling bnxt_open_nic() would be a problem.  To make this work,
bnxt_set_features() has to be modified to test for BNXT_STATE_OPEN for
the true hardware state instead of checking netif_running().
Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 27e24189
......@@ -4916,9 +4916,32 @@ static int bnxt_cfg_rx_mode(struct bnxt *bp)
return rc;
}
static bool bnxt_rfs_capable(struct bnxt *bp)
{
#ifdef CONFIG_RFS_ACCEL
struct bnxt_pf_info *pf = &bp->pf;
int vnics;
if (BNXT_VF(bp) || !(bp->flags & BNXT_FLAG_MSIX_CAP))
return false;
vnics = 1 + bp->rx_nr_rings;
if (vnics > pf->max_rsscos_ctxs || vnics > pf->max_vnics)
return false;
return true;
#else
return false;
#endif
}
static netdev_features_t bnxt_fix_features(struct net_device *dev,
netdev_features_t features)
{
struct bnxt *bp = netdev_priv(dev);
if (!bnxt_rfs_capable(bp))
features &= ~NETIF_F_NTUPLE;
return features;
}
......@@ -4959,7 +4982,7 @@ static int bnxt_set_features(struct net_device *dev, netdev_features_t features)
bp->flags = flags;
if (!netif_running(dev)) {
if (!test_bit(BNXT_STATE_OPEN, &bp->state)) {
if (update_tpa)
bnxt_set_ring_params(bp);
return rc;
......@@ -5639,11 +5662,8 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (bnxt_vf_pciid(ent->driver_data))
bp->flags |= BNXT_FLAG_VF;
if (pdev->msix_cap) {
if (pdev->msix_cap)
bp->flags |= BNXT_FLAG_MSIX_CAP;
if (BNXT_PF(bp))
bp->flags |= BNXT_FLAG_RFS;
}
rc = bnxt_init_board(pdev, dev);
if (rc < 0)
......@@ -5662,9 +5682,6 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
NETIF_F_RXHASH |
NETIF_F_RXCSUM | NETIF_F_LRO | NETIF_F_GRO;
if (bp->flags & BNXT_FLAG_RFS)
dev->hw_features |= NETIF_F_NTUPLE;
dev->hw_enc_features =
NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | NETIF_F_SG |
NETIF_F_TSO | NETIF_F_TSO6 |
......@@ -5723,6 +5740,14 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
bp->cp_nr_rings = max_t(int, bp->rx_nr_rings, bp->tx_nr_rings);
bp->num_stat_ctxs = bp->cp_nr_rings;
if (BNXT_PF(bp)) {
dev->hw_features |= NETIF_F_NTUPLE;
if (bnxt_rfs_capable(bp)) {
bp->flags |= BNXT_FLAG_RFS;
dev->features |= NETIF_F_NTUPLE;
}
}
if (dev->hw_features & NETIF_F_HW_VLAN_CTAG_RX)
bp->flags |= BNXT_FLAG_STRIP_VLAN;
......
......@@ -266,6 +266,8 @@ static int bnxt_set_channels(struct net_device *dev,
bp->cp_nr_rings = max_t(int, bp->tx_nr_rings, bp->rx_nr_rings);
bp->num_stat_ctxs = bp->cp_nr_rings;
/* After changing number of rx channels, update NTUPLE feature. */
netdev_update_features(dev);
if (netif_running(dev)) {
rc = bnxt_open_nic(bp, true, false);
if ((!rc) && BNXT_PF(bp)) {
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment