Commit 31922394 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman
Browse files

staging: comedi: ni_labpc: clean up multi-line comments



Clean up the multi-line comments at the beginning of the file
so that they follow the CodingStyle.

Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent d5c8d9c4
/*
comedi/drivers/ni_labpc.c
Driver for National Instruments Lab-PC series boards and compatibles
Copyright (C) 2001, 2002, 2003 Frank Mori Hess <fmhess@users.sourceforge.net>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
************************************************************************
*/
/*
Driver: ni_labpc
Description: National Instruments Lab-PC (& compatibles)
Author: Frank Mori Hess <fmhess@users.sourceforge.net>
Devices: [National Instruments] Lab-PC-1200 (labpc-1200),
Lab-PC-1200AI (labpc-1200ai), Lab-PC+ (lab-pc+), PCI-1200 (ni_labpc)
Status: works
Tested with lab-pc-1200. For the older Lab-PC+, not all input ranges
and analog references will work, the available ranges/arefs will
depend on how you have configured the jumpers on your board
(see your owner's manual).
Kernel-level ISA plug-and-play support for the lab-pc-1200
boards has not
yet been added to the driver, mainly due to the fact that
I don't know the device id numbers. If you have one
of these boards,
please file a bug report at http://comedi.org/
so I can get the necessary information from you.
The 1200 series boards have onboard calibration dacs for correcting
analog input/output offsets and gains. The proper settings for these
caldacs are stored on the board's eeprom. To read the caldac values
from the eeprom and store them into a file that can be then be used by
comedilib, use the comedi_calibrate program.
Configuration options - ISA boards:
[0] - I/O port base address
[1] - IRQ (optional, required for timed or externally triggered conversions)
[2] - DMA channel (optional)
Configuration options - PCI boards:
[0] - bus (optional)
[1] - slot (optional)
The Lab-pc+ has quirky chanlist requirements
when scanning multiple channels. Multiple channel scan
sequence must start at highest channel, then decrement down to
channel 0. The rest of the cards can scan down like lab-pc+ or scan
up from channel zero. Chanlists consisting of all one channel
are also legal, and allow you to pace conversions in bursts.
*/
* comedi/drivers/ni_labpc.c
* Driver for National Instruments Lab-PC series boards and compatibles
* Copyright (C) 2001-2003 Frank Mori Hess <fmhess@users.sourceforge.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
NI manuals:
341309a (labpc-1200 register manual)
340914a (pci-1200)
320502b (lab-pc+)
*/
* Driver: ni_labpc
* Description: National Instruments Lab-PC (& compatibles)
* Devices: (National Instruments) Lab-PC-1200 [lab-pc-1200]
* (National Instruments) Lab-PC-1200AI [lab-pc-1200ai]
* (National Instruments) Lab-PC+ [lab-pc+]
* (National Instruments) PCI-1200 [pci-1200]
* Author: Frank Mori Hess <fmhess@users.sourceforge.net>
* Status: works
*
* Configuration options - ISA boards:
* [0] - I/O port base address
* [1] - IRQ (optional, required for timed or externally triggered
* conversions)
* [2] - DMA channel (optional)
*
* Configuration options - PCI boards:
* not applicable, uses PCI auto config
*
* Tested with lab-pc-1200. For the older Lab-PC+, not all input
* ranges and analog references will work, the available ranges/arefs
* will depend on how you have configured the jumpers on your board
* (see your owner's manual).
*
* Kernel-level ISA plug-and-play support for the lab-pc-1200 boards
* has not yet been added to the driver, mainly due to the fact that
* I don't know the device id numbers. If you have one of these boards,
* please file a bug report at http://comedi.org/ so I can get the
* necessary information from you.
*
* The 1200 series boards have onboard calibration dacs for correcting
* analog input/output offsets and gains. The proper settings for these
* caldacs are stored on the board's eeprom. To read the caldac values
* from the eeprom and store them into a file that can be then be used
* by comedilib, use the comedi_calibrate program.
*
* The Lab-pc+ has quirky chanlist requirements when scanning multiple
* channels. Multiple channel scan sequence must start at highest channel,
* then decrement down to channel 0. The rest of the cards can scan down
* like lab-pc+ or scan up from channel zero. Chanlists consisting of all
* one channel are also legal, and allow you to pace conversions in bursts.
*
* NI manuals:
* 341309a (labpc-1200 register manual)
* 340914a (pci-1200)
* 320502b (lab-pc+)
*/
#include <linux/pci.h>
#include <linux/interrupt.h>
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment