Commit 4201af25 authored by Nishanth Menon's avatar Nishanth Menon Committed by Tero Kristo
Browse files

arm64: dts: ti: am654: Add uart nodes



Add uart nodes for AM654 device tree components.
Signed-off-by: default avatarNishanth Menon <nm@ti.com>
Acked-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarTero Kristo <t-kristo@ti.com>
parent 3bc15720
......@@ -28,4 +28,34 @@
#msi-cells = <1>;
};
};
main_uart0: serial@2800000 {
compatible = "ti,am654-uart";
reg = <0x00 0x02800000 0x00 0x100>;
reg-shift = <2>;
reg-io-width = <4>;
interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
};
main_uart1: serial@2810000 {
compatible = "ti,am654-uart";
reg = <0x00 0x02810000 0x00 0x100>;
reg-shift = <2>;
reg-io-width = <4>;
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
};
main_uart2: serial@2820000 {
compatible = "ti,am654-uart";
reg = <0x00 0x02820000 0x00 0x100>;
reg-shift = <2>;
reg-io-width = <4>;
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
};
};
// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for AM6 SoC Family MCU Domain peripherals
*
* Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
*/
&cbass_mcu {
mcu_uart0: serial@40a00000 {
compatible = "ti,am654-uart";
reg = <0x00 0x40a00000 0x00 0x100>;
reg-shift = <2>;
reg-io-width = <4>;
interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <96000000>;
current-speed = <115200>;
};
};
// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for AM6 SoC Family Wakeup Domain peripherals
*
* Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
*/
&cbass_wakeup {
wkup_uart0: serial@42300000 {
compatible = "ti,am654-uart";
reg = <0x00 0x42300000 0x00 0x100>;
reg-shift = <2>;
reg-io-width = <4>;
interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
current-speed = <115200>;
};
};
......@@ -16,6 +16,14 @@
#address-cells = <2>;
#size-cells = <2>;
aliases {
serial0 = &wkup_uart0;
serial1 = &mcu_uart0;
serial2 = &main_uart0;
serial3 = &main_uart1;
serial4 = &main_uart2;
};
chosen { };
firmware {
......@@ -85,3 +93,5 @@
/* Now include the peripherals for each bus segments */
#include "k3-am65-main.dtsi"
#include "k3-am65-mcu.dtsi"
#include "k3-am65-wakeup.dtsi"
......@@ -34,3 +34,8 @@
};
};
};
&wkup_uart0 {
/* Wakeup UART is used by System firmware */
status = "disabled";
};
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment