Commit 43aea817 authored by Heiko Stübner's avatar Heiko Stübner Committed by Mike Turquette
Browse files

dt-bindings: add documentation for rk3188 clock and reset unit



This add bindings documentation for the clock and reset unit found on
rk3188 and rk3066 SoCs from Rockchip.

Also deprecate the old gate clock binding, as these shouldn't be used
in the future.
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
Acked-By: default avatarMax Schwarz <max.schwarz@online.de>
Tested-By: default avatarMax Schwarz <max.schwarz@online.de>
Signed-off-by: default avatarMike Turquette <mturquette@linaro.org>
parent 85fa0c7f
* Rockchip RK3188/RK3066 Clock and Reset Unit
The RK3188/RK3066 clock controller generates and supplies clock to various
controllers within the SoC and also implements a reset controller for SoC
peripherals.
Required Properties:
- compatible: should be "rockchip,rk3188-cru", "rockchip,rk3188a-cru" or
"rockchip,rk3066a-cru"
- reg: physical base address of the controller and length of memory mapped
region.
- #clock-cells: should be 1.
- #reset-cells: should be 1.
Optional Properties:
- rockchip,grf: phandle to the syscon managing the "general register files"
If missing pll rates are not changable, due to the missing pll lock status.
Each clock is assigned an identifier and client nodes can use this identifier
to specify the clock which they consume. All available clocks are defined as
preprocessor macros in the dt-bindings/clock/rk3188-cru.h and
dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources.
Similar macros exist for the reset sources in these files.
External clocks:
There are several clocks that are generated outside the SoC. It is expected
that they are defined using standard clock bindings with following
clock-output-names:
- "xin24m" - crystal input - required,
- "xin32k" - rtc clock - optional,
- "xin27m" - 27mhz crystal input on rk3066 - optional,
- "ext_hsadc" - external HSADC clock - optional,
- "ext_cif0" - external camera clock - optional,
- "ext_rmii" - external RMII clock - optional,
- "ext_jtag" - externalJTAG clock - optional
Example: Clock controller node:
cru: cru@20000000 {
compatible = "rockchip,rk3188-cru";
reg = <0x20000000 0x1000>;
rockchip,grf = <&grf>;
#clock-cells = <1>;
#reset-cells = <1>;
};
Example: UART controller node that consumes the clock generated by the clock
controller:
uart0: serial@10124000 {
compatible = "snps,dw-apb-uart";
reg = <0x10124000 0x400>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <1>;
clocks = <&cru SCLK_UART0>;
};
......@@ -6,6 +6,9 @@ This binding uses the common clock binding[1].
== Gate clocks ==
These bindings are deprecated!
Please use the soc specific CRU bindings instead.
The gate registers form a continuos block which makes the dt node
structure a matter of taste, as either all gates can be put into
one gate clock spanning all registers or they can be divided into
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment