Commit 4907cb7b authored by Anatol Pomozov's avatar Anatol Pomozov Committed by Jiri Kosina
Browse files

treewide: fix comment/printk/variable typos


Signed-off-by: default avatarAnatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parent 203fa3fe
......@@ -427,7 +427,7 @@ DMA engine callback Functions*/
* intel_mid_dma_tx_submit - callback to submit DMA transaction
* @tx: dma engine descriptor
*
* Submit the DMA trasaction for this descriptor, start if ch idle
* Submit the DMA transaction for this descriptor, start if ch idle
*/
static dma_cookie_t intel_mid_dma_tx_submit(struct dma_async_tx_descriptor *tx)
{
......
......@@ -364,7 +364,7 @@ typhoon_inc_rxfree_index(u32 *index, const int count)
static inline void
typhoon_inc_tx_index(u32 *index, const int count)
{
/* if we start using the Hi Tx ring, this needs updateing */
/* if we start using the Hi Tx ring, this needs updating */
typhoon_inc_index(index, count, TXLO_ENTRIES);
}
......
......@@ -1458,7 +1458,7 @@ struct bnx2x {
int fw_stats_req_sz;
/*
* FW statistics data shortcut (points at the begining of
* FW statistics data shortcut (points at the beginning of
* fw_stats buffer + fw_stats_req_sz).
*/
struct bnx2x_fw_stats_data *fw_stats_data;
......
......@@ -1321,7 +1321,7 @@ void bnx2x_init_mcast_obj(struct bnx2x *bp,
* the current command will be enqueued to the tail of the
* pending commands list.
*
* Return: 0 is operation was sucessfull and there are no pending completions,
* Return: 0 is operation was successfull and there are no pending completions,
* negative if there were errors, positive if there are pending
* completions.
*/
......
......@@ -315,7 +315,7 @@ static void _rtl92c_fill_h2c_command(struct ieee80211_hw *hw,
u16 box_reg = 0, box_extreg = 0;
u8 u1b_tmp;
bool isfw_read = false;
bool bwrite_sucess = false;
bool bwrite_success = false;
u8 wait_h2c_limmit = 100;
u8 wait_writeh2c_limmit = 100;
u8 boxcontent[4], boxextcontent[2];
......@@ -354,7 +354,7 @@ static void _rtl92c_fill_h2c_command(struct ieee80211_hw *hw,
}
}
while (!bwrite_sucess) {
while (!bwrite_success) {
wait_writeh2c_limmit--;
if (wait_writeh2c_limmit == 0) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
......@@ -491,7 +491,7 @@ static void _rtl92c_fill_h2c_command(struct ieee80211_hw *hw,
break;
}
bwrite_sucess = true;
bwrite_success = true;
rtlhal->last_hmeboxnum = boxnum + 1;
if (rtlhal->last_hmeboxnum == 4)
......
......@@ -365,7 +365,7 @@ static void _rtl92d_fill_h2c_command(struct ieee80211_hw *hw,
u8 u1b_tmp;
bool isfw_read = false;
u8 buf_index = 0;
bool bwrite_sucess = false;
bool bwrite_success = false;
u8 wait_h2c_limmit = 100;
u8 wait_writeh2c_limmit = 100;
u8 boxcontent[4], boxextcontent[2];
......@@ -408,7 +408,7 @@ static void _rtl92d_fill_h2c_command(struct ieee80211_hw *hw,
break;
}
}
while (!bwrite_sucess) {
while (!bwrite_success) {
wait_writeh2c_limmit--;
if (wait_writeh2c_limmit == 0) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
......@@ -515,7 +515,7 @@ static void _rtl92d_fill_h2c_command(struct ieee80211_hw *hw,
"switch case not processed\n");
break;
}
bwrite_sucess = true;
bwrite_success = true;
rtlhal->last_hmeboxnum = boxnum + 1;
if (rtlhal->last_hmeboxnum == 4)
rtlhal->last_hmeboxnum = 0;
......
......@@ -5587,7 +5587,7 @@ static bfa_status_t bfa_dconf_flash_write(struct bfa_dconf_mod_s *dconf);
static void bfa_dconf_init_cb(void *arg, bfa_status_t status);
/*
* Begining state of dconf module. Waiting for an event to start.
* Beginning state of dconf module. Waiting for an event to start.
*/
static void
bfa_dconf_sm_uninit(struct bfa_dconf_mod_s *dconf, enum bfa_dconf_event event)
......
......@@ -530,7 +530,7 @@ struct bfa_diag_results_fwping {
struct bfa_diag_qtest_result_s {
u32 status;
u16 count; /* sucessful queue test count */
u16 count; /* successful queue test count */
u8 queue;
u8 rsvd; /* 64-bit align */
};
......
......@@ -219,7 +219,7 @@ static struct sas_domain_function_template isci_transport_ops = {
* @isci_host: This parameter specifies the lldd specific wrapper for the
* libsas sas_ha struct.
*
* This method returns an error code indicating sucess or failure. The user
* This method returns an error code indicating success or failure. The user
* should check for possible memory allocation error return otherwise, a zero
* indicates success.
*/
......
......@@ -2240,7 +2240,7 @@ static enum sci_status atapi_data_tc_completion_handler(struct isci_request *ire
status = ireq->sci_status;
sci_change_state(&idev->sm, SCI_STP_DEV_ATAPI_ERROR);
} else {
/* If receiving any non-sucess TC status, no UF
/* If receiving any non-success TC status, no UF
* received yet, then an UF for the status fis
* is coming after (XXX: suspect this is
* actually a protocol error or a bug like the
......
......@@ -532,7 +532,7 @@ int isci_task_abort_task(struct sas_task *task)
/* The request has already completed and there
* is nothing to do here other than to set the task
* done bit, and indicate that the task abort function
* was sucessful.
* was successful.
*/
spin_lock_irqsave(&task->task_state_lock, flags);
task->task_state_flags |= SAS_TASK_STATE_DONE;
......
......@@ -6470,7 +6470,7 @@ lpfc_sli4_queue_verify(struct lpfc_hba *phba)
* we just use some constant number as place holder.
*
* Return codes
* 0 - sucessful
* 0 - successful
* -ENOMEM - No availble memory
* -EIO - The mailbox failed to complete successfully.
**/
......
......@@ -4739,7 +4739,7 @@ lpfc_sli4_read_rev(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq,
* is attached to.
*
* Return codes
* 0 - sucessful
* 0 - successful
* otherwise - failed to retrieve physical port name
**/
static int
......@@ -15118,7 +15118,7 @@ lpfc_check_next_fcf_pri_level(struct lpfc_hba *phba)
/*
* if next_fcf_pri was not set above and the list is not empty then
* we have failed flogis on all of them. So reset flogi failed
* and start at the begining.
* and start at the beginning.
*/
if (!next_fcf_pri && !list_empty(&phba->fcf.fcf_pri_list)) {
list_for_each_entry(fcf_pri, &phba->fcf.fcf_pri_list, list) {
......
......@@ -461,7 +461,7 @@ static int exynos_mipi_dsi_probe(struct platform_device *pdev)
done:
platform_set_drvdata(pdev, dsim);
dev_dbg(&pdev->dev, "%s() completed sucessfuly (%s mode)\n", __func__,
dev_dbg(&pdev->dev, "%s() completed successfully (%s mode)\n", __func__,
dsim_config->e_interface == DSIM_COMMAND ? "CPU" : "RGB");
return 0;
......
......@@ -347,7 +347,7 @@ static void ds1wm_search(void *data, struct w1_master *master_dev,
"pass: %d entering ASM\n", pass);
ds1wm_write_register(ds1wm_data, DS1WM_CMD, DS1WM_CMD_SRA);
dev_dbg(&ds1wm_data->pdev->dev,
"pass: %d begining nibble loop\n", pass);
"pass: %d beginning nibble loop\n", pass);
r_prime = 0;
d = 0;
......
......@@ -479,7 +479,7 @@ void ext2_discard_reservation(struct inode *inode)
/**
* ext2_free_blocks() -- Free given blocks and update quota and i_blocks
* @inode: inode
* @block: start physcial block to free
* @block: start physical block to free
* @count: number of blocks to free
*/
void ext2_free_blocks (struct inode * inode, unsigned long block,
......
......@@ -483,7 +483,7 @@ void ext3_discard_reservation(struct inode *inode)
* ext3_free_blocks_sb() -- Free given blocks and update quota
* @handle: handle to this transaction
* @sb: super block
* @block: start physcial block to free
* @block: start physical block to free
* @count: number of blocks to free
* @pdquot_freed_blocks: pointer to quota
*/
......
......@@ -3196,7 +3196,7 @@ static int ext3_do_update_inode(handle_t *handle,
*
* - Within generic_file_write() for O_SYNC files.
* Here, there will be no transaction running. We wait for any running
* trasnaction to commit.
* transaction to commit.
*
* - Within sys_sync(), kupdate and such.
* We wait on commit, if tol to.
......
......@@ -3227,7 +3227,7 @@ int ext4_discard_partial_page_buffers(handle_t *handle,
* handle: The journal handle
* inode: The files inode
* page: A locked page that contains the offset "from"
* from: The starting byte offset (from the begining of the file)
* from: The starting byte offset (from the beginning of the file)
* to begin discarding
* len: The length of bytes to discard
* flags: Optional flags that may be used:
......@@ -3235,11 +3235,11 @@ int ext4_discard_partial_page_buffers(handle_t *handle,
* EXT4_DISCARD_PARTIAL_PG_ZERO_UNMAPPED
* Only zero the regions of the page whose buffer heads
* have already been unmapped. This flag is appropriate
* for updateing the contents of a page whose blocks may
* for updating the contents of a page whose blocks may
* have already been released, and we only want to zero
* out the regions that correspond to those released blocks.
*
* Returns zero on sucess or negative on failure.
* Returns zero on success or negative on failure.
*/
static int ext4_discard_partial_page_buffers_no_lock(handle_t *handle,
struct inode *inode, struct page *page, loff_t from,
......@@ -3400,7 +3400,7 @@ int ext4_can_truncate(struct inode *inode)
* @offset: The offset where the hole will begin
* @len: The length of the hole
*
* Returns: 0 on sucess or negative on failure
* Returns: 0 on success or negative on failure
*/
int ext4_punch_hole(struct file *file, loff_t offset, loff_t length)
......@@ -3922,7 +3922,7 @@ static int ext4_inode_blocks_set(handle_t *handle,
if (i_blocks <= ~0U) {
/*
* i_blocks can be represnted in a 32 bit variable
* i_blocks can be represented in a 32 bit variable
* as multiple of 512 bytes
*/
raw_inode->i_blocks_lo = cpu_to_le32(i_blocks);
......@@ -4083,7 +4083,7 @@ static int ext4_do_update_inode(handle_t *handle,
*
* - Within generic_file_write() for O_SYNC files.
* Here, there will be no transaction running. We wait for any running
* trasnaction to commit.
* transaction to commit.
*
* - Within sys_sync(), kupdate and such.
* We wait on commit, if tol to.
......@@ -4327,7 +4327,7 @@ static int ext4_index_trans_blocks(struct inode *inode, int nrblocks, int chunk)
* worse case, the indexs blocks spread over different block groups
*
* If datablocks are discontiguous, they are possible to spread over
* different block groups too. If they are contiuguous, with flexbg,
* different block groups too. If they are contiguous, with flexbg,
* they could still across block group boundary.
*
* Also account for superblock, inode, quota and xattr blocks
......
......@@ -4705,7 +4705,7 @@ void ext4_free_blocks(handle_t *handle, struct inode *inode,
* ext4_group_add_blocks() -- Add given blocks to an existing group
* @handle: handle to this transaction
* @sb: super block
* @block: start physcial block to add to the block group
* @block: start physical block to add to the block group
* @count: number of blocks to free
*
* This marks the blocks as free in the bitmap and buddy.
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment