Commit 550c7f4e authored by Beniamino Galvani's avatar Beniamino Galvani Committed by Heiko Stuebner
Browse files

ARM: dts: rockchip: add pwm nodes



This adds the necessary nodex and pinctrl settings for the Rockchip PWM-driver.
Signed-off-by: default avatarBeniamino Galvani <b.galvani@gmail.com>

Modified to use the new clock defines and added rk3066 pins.
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent 69667ca2
......@@ -214,6 +214,30 @@
};
};
pwm0 {
pwm0_out: pwm0-out {
rockchip,pins = <RK_GPIO0 3 RK_FUNC_1 &pcfg_pull_none>;
};
};
pwm1 {
pwm1_out: pwm1-out {
rockchip,pins = <RK_GPIO0 4 RK_FUNC_1 &pcfg_pull_none>;
};
};
pwm2 {
pwm2_out: pwm2-out {
rockchip,pins = <RK_GPIO0 30 RK_FUNC_1 &pcfg_pull_none>;
};
};
pwm3 {
pwm3_out: pwm3-out {
rockchip,pins = <RK_GPIO0 31 RK_FUNC_1 &pcfg_pull_none>;
};
};
uart0 {
uart0_xfer: uart0-xfer {
rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>,
......@@ -362,6 +386,26 @@
pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
};
&pwm0 {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_out>;
};
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pwm1_out>;
};
&pwm2 {
pinctrl-names = "default";
pinctrl-0 = <&pwm2_out>;
};
&pwm3 {
pinctrl-names = "default";
pinctrl-0 = <&pwm3_out>;
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer>;
......
......@@ -182,6 +182,30 @@
};
};
pwm0 {
pwm0_out: pwm0-out {
rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_none>;
};
};
pwm1 {
pwm1_out: pwm1-out {
rockchip,pins = <RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_none>;
};
};
pwm2 {
pwm2_out: pwm2-out {
rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_none>;
};
};
pwm3 {
pwm3_out: pwm3-out {
rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_none>;
};
};
uart0 {
uart0_xfer: uart0-xfer {
rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_up>,
......@@ -337,6 +361,26 @@
pinctrl-0 = <&i2c4_xfer>;
};
&pwm0 {
pinctrl-names = "default";
pinctrl-0 = <&pwm0_out>;
};
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pwm1_out>;
};
&pwm2 {
pinctrl-names = "default";
pinctrl-0 = <&pwm2_out>;
};
&pwm3 {
pinctrl-names = "default";
pinctrl-0 = <&pwm3_out>;
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer>;
......
......@@ -158,6 +158,38 @@
status = "disabled";
};
pwm0: pwm@20030000 {
compatible = "rockchip,rk2928-pwm";
reg = <0x20030000 0x10>;
#pwm-cells = <2>;
clocks = <&cru PCLK_PWM01>;
status = "disabled";
};
pwm1: pwm@20030010 {
compatible = "rockchip,rk2928-pwm";
reg = <0x20030010 0x10>;
#pwm-cells = <2>;
clocks = <&cru PCLK_PWM01>;
status = "disabled";
};
pwm2: pwm@20050020 {
compatible = "rockchip,rk2928-pwm";
reg = <0x20050020 0x10>;
#pwm-cells = <2>;
clocks = <&cru PCLK_PWM23>;
status = "disabled";
};
pwm3: pwm@20050030 {
compatible = "rockchip,rk2928-pwm";
reg = <0x20050030 0x10>;
#pwm-cells = <2>;
clocks = <&cru PCLK_PWM23>;
status = "disabled";
};
i2c2: i2c@20056000 {
compatible = "rockchip,rk3066-i2c";
reg = <0x20056000 0x1000>;
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment