Commit 566c157c authored by Mitko Haralanov's avatar Mitko Haralanov Committed by Doug Ledford
Browse files

staging/rdma/hfi1: Correctly set RcvCtxtCtrl register



The RcvCtxtCtrl register was being incorrectly set upon context
initialization and clean up resulting, in many cases, of contexts using
settings from previous contexts' initialization. This resulted in bad
and unexpected behavior. This was especially important for the TailUpd
bit, which requires special handling and if set incorrectly could lead
to severely degraded performance.

This patch fixes the handling of the RcvCtxtCtrl register, ensuring that
each context gets initialized with settings applicable only for that
context. It also ensures the proper setting for the TailUpd bit by
setting it to either 0 or 1 (as needed by the context's configuration)
explicitly.
Reviewed-by: default avatarIra Weiny <ira.weiny@intel.com>
Signed-off-by: default avatarMitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
parent 11d2b114
......@@ -6684,11 +6684,17 @@ static void rxe_freeze(struct hfi1_devdata *dd)
*/
static void rxe_kernel_unfreeze(struct hfi1_devdata *dd)
{
u32 rcvmask;
int i;
/* enable all kernel contexts */
for (i = 0; i < dd->n_krcv_queues; i++)
hfi1_rcvctrl(dd, HFI1_RCVCTRL_CTXT_ENB, i);
for (i = 0; i < dd->n_krcv_queues; i++) {
rcvmask = HFI1_RCVCTRL_CTXT_ENB;
/* HFI1_RCVCTRL_TAILUPD_[ENB|DIS] needs to be set explicitly */
rcvmask |= HFI1_CAP_KGET_MASK(dd->rcd[i]->flags, DMA_RTAIL) ?
HFI1_RCVCTRL_TAILUPD_ENB : HFI1_RCVCTRL_TAILUPD_DIS;
hfi1_rcvctrl(dd, rcvmask, i);
}
/* enable port */
add_rcvctrl(dd, RCV_CTRL_RCV_PORT_ENABLE_SMASK);
......@@ -11255,6 +11261,7 @@ void hfi1_rcvctrl(struct hfi1_devdata *dd, unsigned int op, int ctxt)
if (dd->rcvhdrtail_dummy_physaddr) {
write_kctxt_csr(dd, ctxt, RCV_HDR_TAIL_ADDR,
dd->rcvhdrtail_dummy_physaddr);
/* Enabling RcvCtxtCtrl.TailUpd is intentional. */
rcvctrl |= RCV_CTXT_CTRL_TAIL_UPD_SMASK;
}
......@@ -11266,8 +11273,11 @@ void hfi1_rcvctrl(struct hfi1_devdata *dd, unsigned int op, int ctxt)
rcvctrl &= ~RCV_CTXT_CTRL_INTR_AVAIL_SMASK;
if (op & HFI1_RCVCTRL_TAILUPD_ENB && rcd->rcvhdrqtailaddr_phys)
rcvctrl |= RCV_CTXT_CTRL_TAIL_UPD_SMASK;
if (op & HFI1_RCVCTRL_TAILUPD_DIS)
rcvctrl &= ~RCV_CTXT_CTRL_TAIL_UPD_SMASK;
if (op & HFI1_RCVCTRL_TAILUPD_DIS) {
/* See comment on RcvCtxtCtrl.TailUpd above */
if (!(op & HFI1_RCVCTRL_CTXT_DIS))
rcvctrl &= ~RCV_CTXT_CTRL_TAIL_UPD_SMASK;
}
if (op & HFI1_RCVCTRL_TIDFLOW_ENB)
rcvctrl |= RCV_CTXT_CTRL_TID_FLOW_ENABLE_SMASK;
if (op & HFI1_RCVCTRL_TIDFLOW_DIS)
......
......@@ -771,6 +771,7 @@ static int hfi1_file_close(struct inode *inode, struct file *fp)
hfi1_rcvctrl(dd, HFI1_RCVCTRL_CTXT_DIS |
HFI1_RCVCTRL_TIDFLOW_DIS |
HFI1_RCVCTRL_INTRAVAIL_DIS |
HFI1_RCVCTRL_TAILUPD_DIS |
HFI1_RCVCTRL_ONE_PKT_EGR_DIS |
HFI1_RCVCTRL_NO_RHQ_DROP_DIS |
HFI1_RCVCTRL_NO_EGR_DROP_DIS, uctxt->ctxt);
......@@ -1156,8 +1157,16 @@ static int user_init(struct file *fp)
rcvctrl_ops |= HFI1_RCVCTRL_NO_EGR_DROP_ENB;
if (HFI1_CAP_KGET_MASK(uctxt->flags, NODROP_RHQ_FULL))
rcvctrl_ops |= HFI1_RCVCTRL_NO_RHQ_DROP_ENB;
/*
* The RcvCtxtCtrl.TailUpd bit has to be explicitly written.
* We can't rely on the correct value to be set from prior
* uses of the chip or ctxt. Therefore, add the rcvctrl op
* for both cases.
*/
if (HFI1_CAP_KGET_MASK(uctxt->flags, DMA_RTAIL))
rcvctrl_ops |= HFI1_RCVCTRL_TAILUPD_ENB;
else
rcvctrl_ops |= HFI1_RCVCTRL_TAILUPD_DIS;
hfi1_rcvctrl(uctxt->dd, rcvctrl_ops, uctxt->ctxt);
/* Notify any waiting slaves */
......
......@@ -589,8 +589,8 @@ static void enable_chip(struct hfi1_devdata *dd)
* Enable kernel ctxts' receive and receive interrupt.
* Other ctxts done as user opens and initializes them.
*/
rcvmask = HFI1_RCVCTRL_CTXT_ENB | HFI1_RCVCTRL_INTRAVAIL_ENB;
for (i = 0; i < dd->first_user_ctxt; ++i) {
rcvmask = HFI1_RCVCTRL_CTXT_ENB | HFI1_RCVCTRL_INTRAVAIL_ENB;
rcvmask |= HFI1_CAP_KGET_MASK(dd->rcd[i]->flags, DMA_RTAIL) ?
HFI1_RCVCTRL_TAILUPD_ENB : HFI1_RCVCTRL_TAILUPD_DIS;
if (!HFI1_CAP_KGET_MASK(dd->rcd[i]->flags, MULTI_PKT_EGR))
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment