Commit aaf6598f authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman
Browse files

staging: comedi: amplc_pci224: remove "empty acquisition" async command



This driver currently allows a cmd->stop_src == TRIG_COUNT with a cmd->stop_arg
of 0. This causes the (*do_cmd) to immediately generate a COMEDI_CB_EOA event
without acquiring any data.

This "empty acquisition" async command is not really useful. Validate that the
cmd->stop_arg is >= 1 in the (*do_cmdtest) and remove the "empty acquisition"
code.
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: default avatarIan Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 157a340d
......@@ -494,21 +494,16 @@ static void pci224_ao_start(struct comedi_device *dev,
unsigned long flags;
set_bit(AO_CMD_STARTED, &devpriv->state);
if (cmd->stop_src == TRIG_COUNT && devpriv->ao_stop_count == 0) {
/* An empty acquisition! */
s->async->events |= COMEDI_CB_EOA;
cfc_handle_events(dev, s);
} else {
/* Enable interrupts. */
spin_lock_irqsave(&devpriv->ao_spinlock, flags);
if (cmd->stop_src == TRIG_EXT)
devpriv->intsce = PCI224_INTR_EXT | PCI224_INTR_DAC;
else
devpriv->intsce = PCI224_INTR_DAC;
outb(devpriv->intsce, devpriv->iobase1 + PCI224_INT_SCE);
spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
}
/* Enable interrupts. */
spin_lock_irqsave(&devpriv->ao_spinlock, flags);
if (cmd->stop_src == TRIG_EXT)
devpriv->intsce = PCI224_INTR_EXT | PCI224_INTR_DAC;
else
devpriv->intsce = PCI224_INTR_DAC;
outb(devpriv->intsce, devpriv->iobase1 + PCI224_INT_SCE);
spin_unlock_irqrestore(&devpriv->ao_spinlock, flags);
}
/*
......@@ -782,7 +777,7 @@ pci224_ao_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s,
switch (cmd->stop_src) {
case TRIG_COUNT:
/* Any count allowed. */
err |= cfc_check_trigger_arg_min(&cmd->stop_arg, 1);
break;
case TRIG_EXT:
/* Force to external trigger 0. */
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment