Commit b401a9bc authored by Philippe Reynes's avatar Philippe Reynes Committed by David S. Miller
Browse files

net: ethernet: ti: cpmac: use phydev from struct net_device



The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phy in the private structure, and update the driver to use the
one contained in struct net_device.
Signed-off-by: default avatarPhilippe Reynes <tremyfr@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent b4cafd8c
......@@ -205,7 +205,6 @@ struct cpmac_priv {
dma_addr_t dma_ring;
void __iomem *regs;
struct mii_bus *mii_bus;
struct phy_device *phy;
char phy_name[MII_BUS_ID_SIZE + 3];
int oldlink, oldspeed, oldduplex;
u32 msg_enable;
......@@ -830,35 +829,29 @@ static void cpmac_tx_timeout(struct net_device *dev)
static int cpmac_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
{
struct cpmac_priv *priv = netdev_priv(dev);
if (!(netif_running(dev)))
return -EINVAL;
if (!priv->phy)
if (!dev->phydev)
return -EINVAL;
return phy_mii_ioctl(priv->phy, ifr, cmd);
return phy_mii_ioctl(dev->phydev, ifr, cmd);
}
static int cpmac_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct cpmac_priv *priv = netdev_priv(dev);
if (priv->phy)
return phy_ethtool_gset(priv->phy, cmd);
if (dev->phydev)
return phy_ethtool_gset(dev->phydev, cmd);
return -EINVAL;
}
static int cpmac_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct cpmac_priv *priv = netdev_priv(dev);
if (!capable(CAP_NET_ADMIN))
return -EPERM;
if (priv->phy)
return phy_ethtool_sset(priv->phy, cmd);
if (dev->phydev)
return phy_ethtool_sset(dev->phydev, cmd);
return -EINVAL;
}
......@@ -914,16 +907,16 @@ static void cpmac_adjust_link(struct net_device *dev)
int new_state = 0;
spin_lock(&priv->lock);
if (priv->phy->link) {
if (dev->phydev->link) {
netif_tx_start_all_queues(dev);
if (priv->phy->duplex != priv->oldduplex) {
if (dev->phydev->duplex != priv->oldduplex) {
new_state = 1;
priv->oldduplex = priv->phy->duplex;
priv->oldduplex = dev->phydev->duplex;
}
if (priv->phy->speed != priv->oldspeed) {
if (dev->phydev->speed != priv->oldspeed) {
new_state = 1;
priv->oldspeed = priv->phy->speed;
priv->oldspeed = dev->phydev->speed;
}
if (!priv->oldlink) {
......@@ -938,7 +931,7 @@ static void cpmac_adjust_link(struct net_device *dev)
}
if (new_state && netif_msg_link(priv) && net_ratelimit())
phy_print_status(priv->phy);
phy_print_status(dev->phydev);
spin_unlock(&priv->lock);
}
......@@ -1016,8 +1009,8 @@ static int cpmac_open(struct net_device *dev)
cpmac_hw_start(dev);
napi_enable(&priv->napi);
priv->phy->state = PHY_CHANGELINK;
phy_start(priv->phy);
dev->phydev->state = PHY_CHANGELINK;
phy_start(dev->phydev);
return 0;
......@@ -1053,7 +1046,7 @@ static int cpmac_stop(struct net_device *dev)
cancel_work_sync(&priv->reset_work);
napi_disable(&priv->napi);
phy_stop(priv->phy);
phy_stop(dev->phydev);
cpmac_hw_stop(dev);
......@@ -1106,6 +1099,7 @@ static int cpmac_probe(struct platform_device *pdev)
struct cpmac_priv *priv;
struct net_device *dev;
struct plat_cpmac_data *pdata;
struct phy_device *phydev = NULL;
pdata = dev_get_platdata(&pdev->dev);
......@@ -1162,14 +1156,14 @@ static int cpmac_probe(struct platform_device *pdev)
snprintf(priv->phy_name, MII_BUS_ID_SIZE, PHY_ID_FMT,
mdio_bus_id, phy_id);
priv->phy = phy_connect(dev, priv->phy_name, cpmac_adjust_link,
PHY_INTERFACE_MODE_MII);
phydev = phy_connect(dev, priv->phy_name, cpmac_adjust_link,
PHY_INTERFACE_MODE_MII);
if (IS_ERR(priv->phy)) {
if (IS_ERR(phydev)) {
if (netif_msg_drv(priv))
dev_err(&pdev->dev, "Could not attach to PHY\n");
rc = PTR_ERR(priv->phy);
rc = PTR_ERR(phydev);
goto out;
}
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment