Commit b7a078e9 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman
Browse files

staging: comedi: adl_pci9118: absorb pci9118_ai_set_range_aref()



This function is called by the analog input (*insn_read) and (*do_cmd)
operations. The pci9118_set_chanlist() function is also called by those
operations. Setting the range and aref logically belongs with setting
the chanlist. To clarify the code, absorb pci9118_ai_set_range_aref()
into pci9118_set_chanlist().
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: default avatarIan Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 7d62b548
......@@ -322,22 +322,6 @@ static void pci9118_ai_reset_fifo(struct comedi_device *dev)
outl(0, dev->iobase + PCI9118_FIFO_RESET_REG);
}
static void pci9118_ai_set_range_aref(struct comedi_device *dev,
struct comedi_subdevice *s,
unsigned int chanspec)
{
struct pci9118_private *devpriv = dev->private;
unsigned int range = CR_RANGE(chanspec);
unsigned int aref = CR_AREF(chanspec);
devpriv->ai_ctrl = 0;
if (comedi_range_is_unipolar(s, range))
devpriv->ai_ctrl |= PCI9118_AI_CTRL_UNIP;
if (aref == AREF_DIFF)
devpriv->ai_ctrl |= PCI9118_AI_CTRL_DIFF;
outl(devpriv->ai_ctrl, dev->iobase + PCI9118_AI_CTRL_REG);
}
static int check_channel_list(struct comedi_device *dev,
struct comedi_subdevice *s, int n_chan,
unsigned int *chanlist, int frontadd, int backadd)
......@@ -391,9 +375,23 @@ static void pci9118_set_chanlist(struct comedi_device *dev,
int frontadd, int backadd)
{
struct pci9118_private *devpriv = dev->private;
unsigned int range0 = CR_RANGE(chanlist[0]);
unsigned int aref0 = CR_AREF(chanlist[0]);
unsigned int scanquad, gain, ssh = 0x00;
int i;
/*
* Configure analog input based on the first chanlist entry.
* All entries are either unipolar or bipolar and single-ended
* or differential.
*/
devpriv->ai_ctrl = 0;
if (comedi_range_is_unipolar(s, range0))
devpriv->ai_ctrl |= PCI9118_AI_CTRL_UNIP;
if (aref0 == AREF_DIFF)
devpriv->ai_ctrl |= PCI9118_AI_CTRL_DIFF;
outl(devpriv->ai_ctrl, dev->iobase + PCI9118_AI_CTRL_REG);
/* gods know why this sequence! */
outl(2, dev->iobase + PCI9118_AI_AUTOSCAN_MODE_REG);
outl(0, dev->iobase + PCI9118_AI_AUTOSCAN_MODE_REG);
......@@ -1327,14 +1325,9 @@ static int pci9118_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
return -EINVAL;
/*
* Configure analog input based on the first chanlist entry.
* All entries are either unipolar or bipolar and single-ended
* or differential.
*
* Configure analog input and load the chanlist.
* The acqusition control bits are enabled later.
*/
pci9118_ai_set_range_aref(dev, s, cmd->chanlist[0]);
pci9118_set_chanlist(dev, s, cmd->chanlist_len, cmd->chanlist,
devpriv->ai_add_front, devpriv->ai_add_back);
......@@ -1443,14 +1436,12 @@ static int pci9118_ai_insn_read(struct comedi_device *dev,
* Configure analog input based on the chanspec.
* Acqusition is software controlled without interrupts.
*/
pci9118_ai_set_range_aref(dev, s, insn->chanspec);
pci9118_set_chanlist(dev, s, 1, &insn->chanspec, 0, 0);
/* set default config (disable burst and triggers) */
devpriv->ai_cfg = PCI9118_AI_CFG_PDTRG | PCI9118_AI_CFG_PETRG;
outl(devpriv->ai_cfg, dev->iobase + PCI9118_AI_CFG_REG);
pci9118_set_chanlist(dev, s, 1, &insn->chanspec, 0, 0);
pci9118_ai_reset_fifo(dev);
for (i = 0; i < insn->n; i++) {
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment