Commit c1dcc927 authored by Soren Brinkmann's avatar Soren Brinkmann Committed by Daniel Lezcano
Browse files

clocksource: cadence_ttc: Fix mutex taken inside interrupt context



When the kernel is compiled with:
CONFIG_HIGH_RES_TIMERS=no
CONFIG_HZ_PERIODIC=yes
CONFIG_DEBUG_ATOMIC_SLEEP=yes

The following WARN appears:

WARNING: CPU: 1 PID: 0 at linux/kernel/mutex.c:856 mutex_trylock+0x70/0x1fc()
DEBUG_LOCKS_WARN_ON(in_interrupt())
Modules linked in:
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.12.0-xilinx-dirty #93
[<c0014a78>] (unwind_backtrace+0x0/0x11c) from [<c0011b6c>] (show_stack+0x10/0x14)
[<c0011b6c>] (show_stack+0x10/0x14) from [<c039120c>] (dump_stack+0x7c/0xc0)
[<c039120c>] (dump_stack+0x7c/0xc0) from [<c001fda4>] (warn_slowpath_common+0x60/0x84)
[<c001fda4>] (warn_slowpath_common+0x60/0x84) from [<c001fe48>] (warn_slowpath_fmt+0x2c/0x3c)
[<c001fe48>] (warn_slowpath_fmt+0x2c/0x3c) from [<c0392658>] (mutex_trylock+0x70/0x1fc)
[<c0392658>] (mutex_trylock+0x70/0x1fc) from [<c02dfc08>] (clk_prepare_lock+0xc/0xe4)
[<c02dfc08>] (clk_prepare_lock+0xc/0xe4) from [<c02e099c>] (clk_get_rate+0xc/0x44)
[<c02e099c>] (clk_get_rate+0xc/0x44) from [<c02d0394>] (ttc_set_mode+0x34/0x78)
[<c02d0394>] (ttc_set_mode+0x34/0x78) from [<c005f794>] (clockevents_set_mode+0x28/0x5c)
[<c005f794>] (clockevents_set_mode+0x28/0x5c) from [<c00607fc>] (tick_broadcast_on_off+0x190/0x1c0)
[<c00607fc>] (tick_broadcast_on_off+0x190/0x1c0) from [<c005f168>] (clockevents_notify+0x58/0x1ac)
[<c005f168>] (clockevents_notify+0x58/0x1ac) from [<c02b99dc>] (cpuidle_setup_broadcast_timer+0x20/0x24)
[<c02b99dc>] (cpuidle_setup_broadcast_timer+0x20/0x24) from [<c006cd04>] (generic_smp_call_function_single_interrupt+0)
[<c006cd04>] (generic_smp_call_function_single_interrupt+0xe0/0x130) from [<c00138c8>] (handle_IPI+0x88/0x118)
[<c00138c8>] (handle_IPI+0x88/0x118) from [<c0008504>] (gic_handle_irq+0x58/0x60)
[<c0008504>] (gic_handle_irq+0x58/0x60) from [<c0012644>] (__irq_svc+0x44/0x78)
Exception stack(0xef099fa0 to 0xef099fe8)
9fa0: 00000001 ef092100 00000000 ef092100 ef098000 00000015 c0399f2c c0579d74
9fc0: 0000406a 413fc090 00000000 00000000 00000000 ef099fe8 c00666ec c000f46c
9fe0: 20000113 ffffffff
[<c0012644>] (__irq_svc+0x44/0x78) from [<c000f46c>] (arch_cpu_idle+0x34/0x3c)
[<c000f46c>] (arch_cpu_idle+0x34/0x3c) from [<c0053980>] (cpu_startup_entry+0xa8/0x10c)
[<c0053980>] (cpu_startup_entry+0xa8/0x10c) from [<000085a4>] (0x85a4)

We are in an interrupt context (IPI) and we are calling clk_get_rate in the
set_mode function which in turn ends up by getting a mutex... Even if that
does not hang, it is a potential kernel deadlock.

It is not allowed to call clk_get_rate() from interrupt context. To
avoid such calls the timer input frequency is stored in the driver's
data struct which makes it accessible to the driver in any context.

[dlezcano] completed the changelog with the WARN trace and added a more
detailed description. Tested on zync zc702.
Acked-by: default avatarDaniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: default avatarDaniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: default avatarSoren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: default avatarDaniel Lezcano <daniel.lezcano@linaro.org>
parent b0031f22
......@@ -67,11 +67,13 @@
* struct ttc_timer - This definition defines local timer structure
*
* @base_addr: Base address of timer
* @freq: Timer input clock frequency
* @clk: Associated clock source
* @clk_rate_change_nb Notifier block for clock rate changes
*/
struct ttc_timer {
void __iomem *base_addr;
unsigned long freq;
struct clk *clk;
struct notifier_block clk_rate_change_nb;
};
......@@ -196,8 +198,7 @@ static void ttc_set_mode(enum clock_event_mode mode,
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
ttc_set_interval(timer,
DIV_ROUND_CLOSEST(clk_get_rate(ttce->ttc.clk),
ttc_set_interval(timer, DIV_ROUND_CLOSEST(ttce->ttc.freq,
PRESCALE * HZ));
break;
case CLOCK_EVT_MODE_ONESHOT:
......@@ -273,6 +274,8 @@ static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base)
return;
}
ttccs->ttc.freq = clk_get_rate(ttccs->ttc.clk);
ttccs->ttc.clk_rate_change_nb.notifier_call =
ttc_rate_change_clocksource_cb;
ttccs->ttc.clk_rate_change_nb.next = NULL;
......@@ -298,16 +301,14 @@ static void __init ttc_setup_clocksource(struct clk *clk, void __iomem *base)
__raw_writel(CNT_CNTRL_RESET,
ttccs->ttc.base_addr + TTC_CNT_CNTRL_OFFSET);
err = clocksource_register_hz(&ttccs->cs,
clk_get_rate(ttccs->ttc.clk) / PRESCALE);
err = clocksource_register_hz(&ttccs->cs, ttccs->ttc.freq / PRESCALE);
if (WARN_ON(err)) {
kfree(ttccs);
return;
}
ttc_sched_clock_val_reg = base + TTC_COUNT_VAL_OFFSET;
setup_sched_clock(ttc_sched_clock_read, 16,
clk_get_rate(ttccs->ttc.clk) / PRESCALE);
setup_sched_clock(ttc_sched_clock_read, 16, ttccs->ttc.freq / PRESCALE);
}
static int ttc_rate_change_clockevent_cb(struct notifier_block *nb,
......@@ -334,6 +335,9 @@ static int ttc_rate_change_clockevent_cb(struct notifier_block *nb,
ndata->new_rate / PRESCALE);
local_irq_restore(flags);
/* update cached frequency */
ttc->freq = ndata->new_rate;
/* fall through */
}
case PRE_RATE_CHANGE:
......@@ -367,6 +371,7 @@ static void __init ttc_setup_clockevent(struct clk *clk,
if (clk_notifier_register(ttcce->ttc.clk,
&ttcce->ttc.clk_rate_change_nb))
pr_warn("Unable to register clock notifier.\n");
ttcce->ttc.freq = clk_get_rate(ttcce->ttc.clk);
ttcce->ttc.base_addr = base;
ttcce->ce.name = "ttc_clockevent";
......@@ -396,7 +401,7 @@ static void __init ttc_setup_clockevent(struct clk *clk,
}
clockevents_config_and_register(&ttcce->ce,
clk_get_rate(ttcce->ttc.clk) / PRESCALE, 1, 0xfffe);
ttcce->ttc.freq / PRESCALE, 1, 0xfffe);
}
/**
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment