Commit cc0104e8 authored by Ingo Molnar's avatar Ingo Molnar
Browse files

Merge branch 'linus' into tracing/urgent



Conflicts:
	kernel/trace/trace_kprobe.c

Merge reason: resolve the conflict.
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
parents 16620e0f f4054253
What: /sys/bus/pci/drivers/qla2xxx/.../devices/*
Date: September 2009
Contact: QLogic Linux Driver <linux-driver@qlogic.com>
Description: qla2xxx-udev.sh currently looks for uevent CHANGE events to
signal a firmware-dump has been generated by the driver and is
ready for retrieval.
Users: qla2xxx-udev.sh. Proposed changes should be mailed to
linux-driver@qlogic.com
......@@ -8,7 +8,7 @@ Description:
1 - major number
2 - minor mumber
3 - device name
4 - reads completed succesfully
4 - reads completed successfully
5 - reads merged
6 - sectors read
7 - time spent reading (ms)
......
......@@ -4,7 +4,7 @@ Contact: Jerome Marchand <jmarchan@redhat.com>
Description:
The /sys/block/<disk>/stat files displays the I/O
statistics of disk <disk>. They contain 11 fields:
1 - reads completed succesfully
1 - reads completed successfully
2 - reads merged
3 - sectors read
4 - time spent reading (ms)
......
......@@ -144,3 +144,16 @@ Description:
Write a 1 to force the device to disconnect
(equivalent to unplugging a wired USB device).
What: /sys/bus/usb/drivers/.../remove_id
Date: November 2009
Contact: CHENG Renquan <rqcheng@smu.edu.sg>
Description:
Writing a device ID to this file will remove an ID
that was dynamically added via the new_id sysfs entry.
The format for the device ID is:
idVendor idProduct. After successfully
removing an ID, the driver will no longer support the
device. This is useful to ensure auto probing won't
match the driver to the device. For example:
# echo "046d c315" > /sys/bus/usb/drivers/foo/remove_id
......@@ -23,3 +23,16 @@ Description:
Since this relates to security (specifically, the
lifetime of PTKs and GTKs) it should not be changed
from the default.
What: /sys/class/uwb_rc/uwbN/wusbhc/wusb_phy_rate
Date: August 2009
KernelVersion: 2.6.32
Contact: David Vrabel <david.vrabel@csr.com>
Description:
The maximum PHY rate to use for all connected devices.
This is only of limited use for testing and
development as the hardware's automatic rate
adaptation is better then this simple control.
Refer to [ECMA-368] section 10.3.1.1 for the value to
use.
......@@ -62,6 +62,21 @@ Description: CPU topology files that describe kernel limits related to
See Documentation/cputopology.txt for more information.
What: /sys/devices/system/cpu/probe
/sys/devices/system/cpu/release
Date: November 2009
Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
Description: Dynamic addition and removal of CPU's. This is not hotplug
removal, this is meant complete removal/addition of the CPU
from the system.
probe: writes to this file will dynamically add a CPU to the
system. Information written to the file to add CPU's is
architecture specific.
release: writes to this file dynamically remove a CPU from
the system. Information writtento the file to remove CPU's
is architecture specific.
What: /sys/devices/system/cpu/cpu#/node
Date: October 2009
......@@ -136,6 +151,24 @@ Description: Discover cpuidle policy and mechanism
See files in Documentation/cpuidle/ for more information.
What: /sys/devices/system/cpu/cpu#/cpufreq/*
Date: pre-git history
Contact: cpufreq@vger.kernel.org
Description: Discover and change clock speed of CPUs
Clock scaling allows you to change the clock speed of the
CPUs on the fly. This is a nice method to save battery
power, because the lower the clock speed, the less power
the CPU consumes.
There are many knobs to tweak in this directory.
See files in Documentation/cpu-freq/ for more information.
In particular, read Documentation/cpu-freq/user-guide.txt
to learn how to control the knobs.
What: /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X
Date: August 2008
KernelVersion: 2.6.27
......
......@@ -45,8 +45,9 @@ KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The alloc_fastpath file is read-only and specifies how many
objects have been allocated using the fast path.
The alloc_fastpath file shows how many objects have been
allocated using the fast path. It can be written to clear the
current count.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/alloc_from_partial
......@@ -55,9 +56,10 @@ KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The alloc_from_partial file is read-only and specifies how
many times a cpu slab has been full and it has been refilled
by using a slab from the list of partially used slabs.
The alloc_from_partial file shows how many times a cpu slab has
been full and it has been refilled by using a slab from the list
of partially used slabs. It can be written to clear the current
count.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/alloc_refill
......@@ -66,9 +68,9 @@ KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The alloc_refill file is read-only and specifies how many
times the per-cpu freelist was empty but there were objects
available as the result of remote cpu frees.
The alloc_refill file shows how many times the per-cpu freelist
was empty but there were objects available as the result of
remote cpu frees. It can be written to clear the current count.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/alloc_slab
......@@ -77,8 +79,9 @@ KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The alloc_slab file is read-only and specifies how many times
a new slab had to be allocated from the page allocator.
The alloc_slab file is shows how many times a new slab had to
be allocated from the page allocator. It can be written to
clear the current count.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/alloc_slowpath
......@@ -87,9 +90,10 @@ KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The alloc_slowpath file is read-only and specifies how many
objects have been allocated using the slow path because of a
refill or allocation from a partial or new slab.
The alloc_slowpath file shows how many objects have been
allocated using the slow path because of a refill or
allocation from a partial or new slab. It can be written to
clear the current count.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/cache_dma
......@@ -117,10 +121,11 @@ KernelVersion: 2.6.31
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The file cpuslab_flush is read-only and specifies how many
times a cache's cpu slabs have been flushed as the result of
destroying or shrinking a cache, a cpu going offline, or as
the result of forcing an allocation from a certain node.
The file cpuslab_flush shows how many times a cache's cpu slabs
have been flushed as the result of destroying or shrinking a
cache, a cpu going offline, or as the result of forcing an
allocation from a certain node. It can be written to clear the
current count.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/ctor
......@@ -139,8 +144,8 @@ KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The file deactivate_empty is read-only and specifies how many
times an empty cpu slab was deactivated.
The deactivate_empty file shows how many times an empty cpu slab
was deactivated. It can be written to clear the current count.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/deactivate_full
......@@ -149,8 +154,8 @@ KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The file deactivate_full is read-only and specifies how many
times a full cpu slab was deactivated.
The deactivate_full file shows how many times a full cpu slab
was deactivated. It can be written to clear the current count.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/deactivate_remote_frees
......@@ -159,9 +164,9 @@ KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The file deactivate_remote_frees is read-only and specifies how
many times a cpu slab has been deactivated and contained free
objects that were freed remotely.
The deactivate_remote_frees file shows how many times a cpu slab
has been deactivated and contained free objects that were freed
remotely. It can be written to clear the current count.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/deactivate_to_head
......@@ -170,9 +175,9 @@ KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The file deactivate_to_head is read-only and specifies how
many times a partial cpu slab was deactivated and added to the
head of its node's partial list.
The deactivate_to_head file shows how many times a partial cpu
slab was deactivated and added to the head of its node's partial
list. It can be written to clear the current count.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/deactivate_to_tail
......@@ -181,9 +186,9 @@ KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The file deactivate_to_tail is read-only and specifies how
many times a partial cpu slab was deactivated and added to the
tail of its node's partial list.
The deactivate_to_tail file shows how many times a partial cpu
slab was deactivated and added to the tail of its node's partial
list. It can be written to clear the current count.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/destroy_by_rcu
......@@ -201,9 +206,9 @@ KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The file free_add_partial is read-only and specifies how many
times an object has been freed in a full slab so that it had to
added to its node's partial list.
The free_add_partial file shows how many times an object has
been freed in a full slab so that it had to added to its node's
partial list. It can be written to clear the current count.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/free_calls
......@@ -222,9 +227,9 @@ KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The free_fastpath file is read-only and specifies how many
objects have been freed using the fast path because it was an
object from the cpu slab.
The free_fastpath file shows how many objects have been freed
using the fast path because it was an object from the cpu slab.
It can be written to clear the current count.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/free_frozen
......@@ -233,9 +238,9 @@ KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The free_frozen file is read-only and specifies how many
objects have been freed to a frozen slab (i.e. a remote cpu
slab).
The free_frozen file shows how many objects have been freed to
a frozen slab (i.e. a remote cpu slab). It can be written to
clear the current count.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/free_remove_partial
......@@ -244,9 +249,10 @@ KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The file free_remove_partial is read-only and specifies how
many times an object has been freed to a now-empty slab so
that it had to be removed from its node's partial list.
The free_remove_partial file shows how many times an object has
been freed to a now-empty slab so that it had to be removed from
its node's partial list. It can be written to clear the current
count.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/free_slab
......@@ -255,8 +261,9 @@ KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The free_slab file is read-only and specifies how many times an
empty slab has been freed back to the page allocator.
The free_slab file shows how many times an empty slab has been
freed back to the page allocator. It can be written to clear
the current count.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/free_slowpath
......@@ -265,9 +272,9 @@ KernelVersion: 2.6.25
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The free_slowpath file is read-only and specifies how many
objects have been freed using the slow path (i.e. to a full or
partial slab).
The free_slowpath file shows how many objects have been freed
using the slow path (i.e. to a full or partial slab). It can
be written to clear the current count.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/hwcache_align
......@@ -346,10 +353,10 @@ KernelVersion: 2.6.26
Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
Christoph Lameter <cl@linux-foundation.org>
Description:
The file order_fallback is read-only and specifies how many
times an allocation of a new slab has not been possible at the
cache's order and instead fallen back to its minimum possible
order.
The order_fallback file shows how many times an allocation of a
new slab has not been possible at the cache's order and instead
fallen back to its minimum possible order. It can be written to
clear the current count.
Available when CONFIG_SLUB_STATS is enabled.
What: /sys/kernel/slab/cache/partial
......
......@@ -214,7 +214,7 @@ most specific mask.
Here is pseudo-code showing how this might be done:
#define PLAYBACK_ADDRESS_BITS DMA_BIT_MASK(32)
#define RECORD_ADDRESS_BITS 0x00ffffff
#define RECORD_ADDRESS_BITS DMA_BIT_MASK(24)
struct my_sound_card *card;
struct pci_dev *pdev;
......@@ -224,14 +224,14 @@ Here is pseudo-code showing how this might be done:
card->playback_enabled = 1;
} else {
card->playback_enabled = 0;
printk(KERN_WARN "%s: Playback disabled due to DMA limitations.\n",
printk(KERN_WARNING "%s: Playback disabled due to DMA limitations.\n",
card->name);
}
if (!pci_set_dma_mask(pdev, RECORD_ADDRESS_BITS)) {
card->record_enabled = 1;
} else {
card->record_enabled = 0;
printk(KERN_WARN "%s: Record disabled due to DMA limitations.\n",
printk(KERN_WARNING "%s: Record disabled due to DMA limitations.\n",
card->name);
}
......
......@@ -293,10 +293,23 @@ X!Idrivers/video/console/fonts.c
<chapter id="input_subsystem">
<title>Input Subsystem</title>
<sect1><title>Input core</title>
!Iinclude/linux/input.h
!Edrivers/input/input.c
!Edrivers/input/ff-core.c
!Edrivers/input/ff-memless.c
</sect1>
<sect1><title>Polled input devices</title>
!Iinclude/linux/input-polldev.h
!Edrivers/input/input-polldev.c
</sect1>
<sect1><title>Matrix keyboars/keypads</title>
!Iinclude/linux/input/matrix_keypad.h
</sect1>
<sect1><title>Sparse keymap support</title>
!Iinclude/linux/input/sparse-keymap.h
!Edrivers/input/sparse-keymap.c
</sect1>
</chapter>
<chapter id="spi">
......
......@@ -29,6 +29,14 @@
<revhistory>
<!-- Put document revisions here, newest first. -->
<revision>
<revnumber>2.0.2</revnumber>
<date>2009-10-25</date>
<authorinitials>mcc</authorinitials>
<revremark>
documents FE_SET_FRONTEND_TUNE_MODE and FE_DISHETWORK_SEND_LEGACY_CMD ioctls.
</revremark>
</revision>
<revision>
<revnumber>2.0.1</revnumber>
<date>2009-09-16</date>
......@@ -85,3 +93,8 @@ Added ISDB-T test originally written by Patrick Boettcher
&sub-examples;
</chapter>
<!-- END OF CHAPTERS -->
<appendix id="frontend_h">
<title>DVB Frontend Header File</title>
&sub-frontend-h;
</appendix>
<section id="FE_GET_PROPERTY">
<title>FE_GET_PROPERTY/FE_SET_PROPERTY</title>
<section id="isdbt">
<title>ISDB-T frontend</title>
<para>This section describes shortly what are the possible parameters in the Linux
......@@ -312,3 +315,4 @@
</section>
</section>
</section>
</section>
<programlisting>
/*
* frontend.h
*
* Copyright (C) 2000 Marcus Metzler &lt;marcus@convergence.de&gt;
* Ralph Metzler &lt;ralph@convergence.de&gt;
* Holger Waechtler &lt;holger@convergence.de&gt;
* Andre Draszik &lt;ad@convergence.de&gt;
* for convergence integrated media GmbH
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public License
* as published by the Free Software Foundation; either version 2.1
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
*/
#ifndef _DVBFRONTEND_H_
#define _DVBFRONTEND_H_
#include &lt;linux/types.h&gt;
typedef enum fe_type {
FE_QPSK,
FE_QAM,
FE_OFDM,
FE_ATSC
} fe_type_t;
typedef enum fe_caps {
FE_IS_STUPID = 0,
FE_CAN_INVERSION_AUTO = 0x1,
FE_CAN_FEC_1_2 = 0x2,
FE_CAN_FEC_2_3 = 0x4,
FE_CAN_FEC_3_4 = 0x8,
FE_CAN_FEC_4_5 = 0x10,
FE_CAN_FEC_5_6 = 0x20,
FE_CAN_FEC_6_7 = 0x40,
FE_CAN_FEC_7_8 = 0x80,
FE_CAN_FEC_8_9 = 0x100,
FE_CAN_FEC_AUTO = 0x200,
FE_CAN_QPSK = 0x400,
FE_CAN_QAM_16 = 0x800,
FE_CAN_QAM_32 = 0x1000,
FE_CAN_QAM_64 = 0x2000,
FE_CAN_QAM_128 = 0x4000,
FE_CAN_QAM_256 = 0x8000,
FE_CAN_QAM_AUTO = 0x10000,
FE_CAN_TRANSMISSION_MODE_AUTO = 0x20000,
FE_CAN_BANDWIDTH_AUTO = 0x40000,
FE_CAN_GUARD_INTERVAL_AUTO = 0x80000,
FE_CAN_HIERARCHY_AUTO = 0x100000,
FE_CAN_8VSB = 0x200000,
FE_CAN_16VSB = 0x400000,
FE_HAS_EXTENDED_CAPS = 0x800000, /* We need more bitspace for newer APIs, indicate this. */
FE_CAN_2G_MODULATION = 0x10000000, /* frontend supports "2nd generation modulation" (DVB-S2) */
FE_NEEDS_BENDING = 0x20000000, /* not supported anymore, don't use (frontend requires frequency bending) */
FE_CAN_RECOVER = 0x40000000, /* frontend can recover from a cable unplug automatically */
FE_CAN_MUTE_TS = 0x80000000 /* frontend can stop spurious TS data output */
} fe_caps_t;
struct dvb_frontend_info {
char name[128];
fe_type_t type;
__u32 frequency_min;
__u32 frequency_max;
__u32 frequency_stepsize;
__u32 frequency_tolerance;
__u32 symbol_rate_min;
__u32 symbol_rate_max;
__u32 symbol_rate_tolerance; /* ppm */
__u32 notifier_delay; /* DEPRECATED */
fe_caps_t caps;
};
/**
* Check out the DiSEqC bus spec available on http://www.eutelsat.org/ for
* the meaning of this struct...
*/
struct dvb_diseqc_master_cmd {
__u8 msg [6]; /* { framing, address, command, data [3] } */
__u8 msg_len; /* valid values are 3...6 */
};
struct dvb_diseqc_slave_reply {
__u8 msg [4]; /* { framing, data [3] } */
__u8 msg_len; /* valid values are 0...4, 0 means no msg */
int timeout; /* return from ioctl after timeout ms with */
}; /* errorcode when no message was received */
typedef enum fe_sec_voltage {
SEC_VOLTAGE_13,
SEC_VOLTAGE_18,
SEC_VOLTAGE_OFF
} fe_sec_voltage_t;
typedef enum fe_sec_tone_mode {
SEC_TONE_ON,
SEC_TONE_OFF
} fe_sec_tone_mode_t;
typedef enum fe_sec_mini_cmd {
SEC_MINI_A,
SEC_MINI_B
} fe_sec_mini_cmd_t;
typedef enum fe_status {
FE_HAS_SIGNAL = 0x01, /* found something above the noise level */
FE_HAS_CARRIER = 0x02, /* found a DVB signal */
FE_HAS_VITERBI = 0x04, /* FEC is stable */
FE_HAS_SYNC = 0x08, /* found sync bytes */
FE_HAS_LOCK = 0x10, /* everything's working... */
FE_TIMEDOUT = 0x20, /* no lock within the last ~2 seconds */
FE_REINIT = 0x40 /* frontend was reinitialized, */
} fe_status_t; /* application is recommended to reset */
/* DiSEqC, tone and parameters */
typedef enum fe_spectral_inversion {
INVERSION_OFF,
INVERSION_ON,
INVERSION_AUTO
} fe_spectral_inversion_t;
typedef enum fe_code_rate {
FEC_NONE = 0,
FEC_1_2,
FEC_2_3,
FEC_3_4,
FEC_4_5,
FEC_5_6,
FEC_6_7,
FEC_7_8,
FEC_8_9,
FEC_AUTO,
FEC_3_5,
FEC_9_10,
} fe_code_rate_t;
typedef enum fe_modulation {
QPSK,
QAM_16,
QAM_32,
QAM_64,
QAM_128,
QAM_256,
QAM_AUTO,
VSB_8,
VSB_16,
PSK_8,
APSK_16,
APSK_32,
DQPSK,
} fe_modulation_t;
typedef enum fe_transmit_mode {
TRANSMISSION_MODE_2K,
TRANSMISSION_MODE_8K,
TRANSMISSION_MODE_AUTO,
TRANSMISSION_MODE_4K
} fe_transmit_mode_t;
typedef enum fe_bandwidth {
BANDWIDTH_8_MHZ,
BANDWIDTH_7_MHZ,
BANDWIDTH_6_MHZ,
BANDWIDTH_AUTO
} fe_bandwidth_t;
typedef enum fe_guard_interval {
GUARD_INTERVAL_1_32,
GUARD_INTERVAL_1_16,
GUARD_INTERVAL_1_8,
GUARD_INTERVAL_1_4,
GUARD_INTERVAL_AUTO
} fe_guard_interval_t;
typedef enum fe_hierarchy {
HIERARCHY_NONE,
HIERARCHY_1,
HIERARCHY_2,
HIERARCHY_4,
HIERARCHY_AUTO
} fe_hierarchy_t;
struct dvb_qpsk_parameters {
__u32 symbol_rate; /* symbol rate in Symbols per second */
fe_code_rate_t fec_inner; /* forward error correction (see above) */
};
struct dvb_qam_parameters {
__u32 symbol_rate; /* symbol rate in Symbols per second */
fe_code_rate_t fec_inner; /* forward error correction (see above) */