1. 23 Dec, 2015 1 commit
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.dk/linux-block · 24bc3ea5
      Linus Torvalds authored
      Pull block layer fixes from Jens Axboe:
       "Three small fixes for 4.4 final. Specifically:
         - The segment issue fix from Junichi, where the old IO path does a
           bio limit split before potentially bouncing the pages.  We need to
           do that in the right order, to ensure that limitations are met.
         - A NVMe surprise removal IO hang fix from Keith.
         - A use-after-free in null_blk, introduced by a previous patch in
           this series.  From Mike Krinkin"
      * 'for-linus' of git://git.kernel.dk/linux-block:
        null_blk: fix use-after-free error
        block: ensure to split after potentially bouncing a bio
        NVMe: IO ending fixes on surprise removal
  2. 22 Dec, 2015 12 commits
  3. 21 Dec, 2015 1 commit
  4. 20 Dec, 2015 7 commits
    • Linus Torvalds's avatar
      Merge tag 'rtc-4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux · 9f7e4327
      Linus Torvalds authored
      Pull RTC fixes from Alexandre Belloni:
       "Late fixes for the RTC subsystem for 4.4:
        A fix for a nasty hardware bug in rk808 and an initialization
        reordering in da9063 to fix a possible crash"
      * tag 'rtc-4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
        rtc: da9063: fix access ordering error during RTC interrupt at system power on
        rtc: rk808: Compensate for Rockchip calendar deviation on November 31st
    • Steve Twiss's avatar
      rtc: da9063: fix access ordering error during RTC interrupt at system power on · 77535ace
      Steve Twiss authored
      This fix alters the ordering of the IRQ and device registrations in the RTC
      driver probe function. This change will apply to the RTC driver that supports
      both DA9063 and DA9062 PMICs.
      A problem could occur with the existing RTC driver if:
      A system is started from a cold boot using the PMIC RTC IRQ to initiate a
      power on operation. For instance, if an RTC alarm is used to start a
      platform from power off.
      The existing driver IRQ is requested before the device has been properly
          ret = devm_request_threaded_irq()
      comes before
          rtc->rtc_dev = devm_rtc_device_register();
      In this case, the interrupt can be called before the device has been
      registered and the handler can be called immediately. The IRQ handler
      da9063_alarm_event() contains the function call
          rtc_update_irq(rtc->rtc_dev, 1, RTC_IRQF | RTC_AF);
      which in turn tries to access the unavailable rtc->rtc_dev.
      The fix is to reorder the functions inside the RTC probe. The IRQ is
      requested after the RTC device resource has been registered so that
      get_irq_byname is the last thing to happen.
      Signed-off-by: default avatarSteve Twiss <stwiss.opensource@diasemi.com>
      Signed-off-by: default avatarAlexandre Belloni <alexandre.belloni@free-electrons.com>
    • Julius Werner's avatar
      rtc: rk808: Compensate for Rockchip calendar deviation on November 31st · f076ef44
      Julius Werner authored
      In A.D. 1582 Pope Gregory XIII found that the existing Julian calendar
      insufficiently represented reality, and changed the rules about
      calculating leap years to account for this. Similarly, in A.D. 2013
      Rockchip hardware engineers found that the new Gregorian calendar still
      contained flaws, and that the month of November should be counted up to
      31 days instead. Unfortunately it takes a long time for calendar changes
      to gain widespread adoption, and just like more than 300 years went by
      before the last Protestant nation implemented Greg's proposal, we will
      have to wait a while until all religions and operating system kernels
      acknowledge the inherent advantages of the Rockchip system. Until then
      we need to translate dates read from (and written to) Rockchip hardware
      back to the Gregorian format.
      This patch works by defining Jan 1st, 2016 as the arbitrary anchor date
      on which Rockchip and Gregorian calendars are in sync. From that we can
      translate arbitrary later dates back and forth by counting the number
      of November/December transitons since the anchor date to determine the
      offset between the calendars. We choose this method (rather than trying
      to regularly "correct" the date stored in hardware) since it's the only
      way to ensure perfect time-keeping even if the system may be shut down
      for an unknown number of years. The drawback is that other software
      reading the same hardware (e.g. mainboard firmware) must use the same
      translation convention (including the same anchor date) to be able to
      read and write correct timestamps from/to the RTC.
      Signed-off-by: default avatarJulius Werner <jwerner@chromium.org>
      Reviewed-by: default avatarDouglas Anderson <dianders@chromium.org>
      Signed-off-by: default avatarAlexandre Belloni <alexandre.belloni@free-electrons.com>
    • Linus Torvalds's avatar
      Merge tag 'tty-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty · 69c37a92
      Linus Torvalds authored
      Pull tty/serial fixes from Greg KH:
       "Here are some tty/serial driver fixes for 4.4-rc6 that resolve some
        reported problems.  All of these have been in linux-next.  The details
        are in the shortlog"
      * tag 'tty-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
        tty: Fix GPF in flush_to_ldisc()
        serial: earlycon: Add missing spinlock initialization
        serial: sh-sci: Fix length of scatterlist
        n_tty: Fix poll() after buffer-limited eof push read
        serial: 8250_uniphier: fix dl_read and dl_write functions
    • Linus Torvalds's avatar
      Merge tag 'usb-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb · 24b0d5e7
      Linus Torvalds authored
      Pull USB fixes from Greg KH:
       "Here are some USB and PHY fixes for 4.4-rc6.  All of them resolve some
        reported problems.  Full details in the shortlog"
      * tag 'usb-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
        USB: fix invalid memory access in hub_activate()
        USB: ipaq.c: fix a timeout loop
        phy: core: Get a refcount to phy in devm_of_phy_get_by_index()
        phy: cygnus: pcie: add missing of_node_put
        phy: miphy365x: add missing of_node_put
        phy: miphy28lp: add missing of_node_put
        phy: rockchip-usb: add missing of_node_put
        phy: berlin-sata: add missing of_node_put
        phy: mt65xx-usb3: add missing of_node_put
        phy: brcmstb-sata: add missing of_node_put
        phy: sun9i-usb: add USB dependency
    • Linus Torvalds's avatar
      Merge tag 'md/4.4-rc5-fixes' of git://neil.brown.name/md · 3a87711e
      Linus Torvalds authored
      Pull md fixes from Neil Brown:
       "Four fixes for md:
         - two recently introduced regressions fixed.
         - one older bug in RAID10 - tagged for -stable since 4.2
         - one minor sysfs api improvement"
      * tag 'md/4.4-rc5-fixes' of git://neil.brown.name/md:
        Fix remove_and_add_spares removes drive added as spare in slot_store
        md: fix bug due to nested suspend
        MD: change journal disk role to disk 0
        md/raid10: fix data corruption and crash during resync
    • Linus Torvalds's avatar
      Merge tag 'powerpc-4.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux · 35b3154e
      Linus Torvalds authored
      Pull powerpc fixes from Michael Ellerman:
       - Partial revert of "powerpc: Individual System V IPC system calls"
       - pr_warn_once on unsupported OPAL_MSG type from Stewart
       - Fix deadlock in opal-irqchip introduced by "Fix double endian
         conversion" from Alistair
      * tag 'powerpc-4.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
        powerpc/opal-irqchip: Fix deadlock introduced by "Fix double endian conversion"
        powerpc/powernv: pr_warn_once on unsupported OPAL_MSG type
        Partial revert of "powerpc: Individual System V IPC system calls"
  5. 19 Dec, 2015 9 commits
    • Linus Torvalds's avatar
      Merge tag 'spi-fix-v4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi · 3c73a2dd
      Linus Torvalds authored
      Pull spi fixes from Mark Brown:
       "A couple of reference counting bugs here, one in spidev and one with
        holding an extra reference in the core that we never freed if we
        removed a device, plus a driver specific fix.  Both of the refcounting
        bugs are very old but they've only been found by observation so
        hopefully their impact has been low"
      * tag 'spi-fix-v4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
        spi: fix parent-device reference leak
        spi: spidev: Hold spi_lock over all defererences of spi in release()
        spi-fsl-dspi: Fix CTAR Register access
    • Linus Torvalds's avatar
      Merge tag 'gpio-v4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio · d525c13e
      Linus Torvalds authored
      Pull GPIO fixes from Linus Walleij:
       "Some GPIO fixes for the v4.4 series.  Most prominent: I revert the
        error propagation from the .get() function until we can fix up all the
        drivers properly for v4.5.
         - Revert the error number propagation from the .get() vtable entry
           temporarily, until we make the proper fixes to all drivers.
         - Fix the clamping behaviour in the generic GPIO driver.
         - Driver fix for the ath79 driver"
      * tag 'gpio-v4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
        gpio: revert get() to non-errorprogating behaviour
        gpio: generic: clamp values from bgpio_get_set()
        gpio: ath79: Fix the logic to clear offset bit of AR71XX_GPIO_REG_OE register
    • Linus Torvalds's avatar
      Merge tag 'pinctrl-v4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl · 38beb96e
      Linus Torvalds authored
      Pull pin control fixes from Linus Walleij:
       - Driver fixes for Freescale i.MX7D, Intel, Broadcom 2835
       - One MAINTAINERS entry
      * tag 'pinctrl-v4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
        MAINTAINERS: pinctrl: Add maintainers for pinctrl-single
        pinctrl: bcm2835: Fix initial value for direction_output
        pinctrl: intel: fix offset calculation issue of register PAD_OWN
        pinctrl: intel: fix bug of register offset calculation
        pinctrl: freescale: add ZERO_OFFSET_VALID flag for vf610 pinctrl
    • Linus Torvalds's avatar
      Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux · d7d3d841
      Linus Torvalds authored
      Pull i2c fixes from Wolfram Sang:
       "A set of 'usual' driver bugfixes for the I2C subsystem"
      * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
        i2c: rcar: disable runtime PM correctly in slave mode
        i2c: designware: Keep pm_runtime_enable/_disable calls in sync
        i2c: designware: fix IO timeout issue for AMD controller
        i2c: imx: init bus recovery info before adding i2c adapter
        i2c: do not use 0x in front of %pa
        i2c: davinci: Increase module clock frequency
        i2c: mv64xxx: The n clockdiv factor is 0 based on sunxi SoCs
        i2c: rk3x: populate correct variable for sda_falling_time
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input · 632f8577
      Linus Torvalds authored
      Pull input fixes from Dmitry Torokhov:
       "Just a few assorted driver fixes"
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
        Input: elants_i2c - fix wake-on-touch
        Input: elan_i2c - set input device's vendor and product IDs
        Input: sun4i-lradc-keys - fix typo in binding documentation
        Input: atmel_mxt_ts - add maxtouch to I2C table for module autoload
        Input: arizona-haptic - fix disabling of haptics device
        Input: aiptek - fix crash on detecting device without endpoints
        Input: atmel_mxt_ts - add generic platform data for Chromebooks
        Input: parkbd - clear unused function pointers
        Input: walkera0701 - clear unused function pointers
        Input: turbografx - clear unused function pointers
        Input: gamecon - clear unused function pointers
        Input: db9 - clear unused function pointers
    • Wolfram Sang's avatar
      i2c: rcar: disable runtime PM correctly in slave mode · b4cd08aa
      Wolfram Sang authored
      When we also are I2C slave, we need to disable runtime PM because the
      address detection mechanism needs to be active all the time. However, we
      can reenable runtime PM once the slave instance was unregistered. So,
      use pm_runtime_get_sync/put to achieve this, since it has proper
      refcounting. pm_runtime_allow/forbid is like a global knob controllable
      from userspace which is unsuitable here.
      Signed-off-by: default avatarWolfram Sang <wsa+renesas@sang-engineering.com>
      Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
      Cc: stable@kernel.org
    • Linus Torvalds's avatar
      Merge tag 'pm+acpi-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm · 1eab0e42
      Linus Torvalds authored
      Pull power management fixes from Rafael Wysocki:
       "These fix a potential regression introduced during the 4.3 cycle
        (generic power domains framework), a nasty bug that has been present
        forever (power capping RAPL driver), a build issue (Tegra cpufreq
        driver) and a minor ugliness introduced recently (intel_pstate).
         - Fix a potential regression in the generic power domains framework
           introduced during the 4.3 development cycle that may lead to
           spurious failures of system suspend in certain situations (Ulf
         - Fix a problem in the power capping RAPL (Running Average Power
           Limits) driver that causes it to initialize successfully on some
           systems where it is not supposed to do that which is due to an
           incorrect check in an initialization routine (Prarit Bhargava).
         - Fix a build problem in the cpufreq Tegra driver that depends on the
           regulator framework, but that dependency is not reflected in
           Kconfig (Arnd Bergmann).
         - Fix a recent mistake in the intel_pstate driver where a numeric
           constant is used directly instead of a symbol defined specifically
           for the case in question (Prarit Bhargava)"
      * tag 'pm+acpi-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
        powercap / RAPL: fix BIOS lock check
        cpufreq: intel_pstate: Minor cleanup for FRAC_BITS
        cpufreq: tegra: add regulator dependency for T124
        PM / Domains: Allow runtime PM callbacks to be re-used during system PM
    • Linus Torvalds's avatar
      Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi · 4fee35a3
      Linus Torvalds authored
      Pull SCSI fixes from James Bottomley:
       "Three fixes this time, two in SES picked up by KASAN for various types
        of buffer overrun.  The first is a USB array which returns page 8
        whatever is asked for and causes us to overrun with incorrect data
        format assumptions and the second is an invalid iteration of page 10
        (the additional information page).
        The final fix is a reversion of a NULL deref fix which caused
        suspend/resume not to be called in pairs leading to incorrect device
        operation (Jens has queued a more proper fix for the problem in
      * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
        ses: fix additional element traversal bug
        Revert "SCSI: Fix NULL pointer dereference in runtime PM"
        ses: Fix problems with simple enclosures
    • James Chen's avatar
      Input: elants_i2c - fix wake-on-touch · 478e5ed1
      James Chen authored
      When sending "SLEEP" command to the controller it ceases scanning
      completely and is unable to wake the system up from sleep, so if it is
      configured as a wakeup source we should simply configure interrupt for
      wakeup and rely on idle logic within the controller to reduce power
      consumption while it is not used.
      Signed-off-by: default avatarJames Chen <james.chen@emc.com.tw>
      Signed-off-by: default avatarDmitry Torokhov <dmitry.torokhov@gmail.com>
  6. 18 Dec, 2015 10 commits