GitLab

A lot of the code in platforms/pseries is using non-machine initcalls.
That means if a kernel built with pseries support runs on another
platform, for example powernv, the initcalls will still run.

Most of these cases are OK, though sometimes only due to luck. Some were
having more effect:

 * hcall_inst_init
  - Checking FW_FEATURE_LPAR which is set on ps3 & celleb.
 * mobility_sysfs_init
  - created sysfs files unconditionally
  - but no effect due to ENOSYS from rtas_ibm_suspend_me()
 * apo_pm_init
  - created sysfs, allows write
  - nothing checks the value written to though
 * alloc_dispatch_log_kmem_cache
  - creating kmem_cache on non-pseries machines
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

A lot of the code in platforms/powernv is using non-machine initcalls.
That means if a kernel built with powernv support runs on another
platform, for example pseries, the initcalls will still run.

That is usually OK, because the initcalls will check for something in
the device tree or elsewhere before doing anything, so on other
platforms they will usually just return.

But it's fishy for powernv code to be running on other platforms, so
switch them all to be machine initcalls. If we want any of them to run
on other platforms in future they should move to sysdev.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Although the name CONFIG_POWER4 suggests that it controls support for
power4 cpus, this symbol is actually misnamed.

It is a historical wart from the powermac code, which used to support
building a 32-bit kernel for power4. CONFIG_POWER4 was used in that
context to guard code that was 64-bit only.

In the powermac code we can just use CONFIG_PPC64 instead, and in other
places it is a synonym for CONFIG_PPC_BOOK3S_64.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

There are still a few occurences where it remains, because it helps to
explain something that persists.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Now that we have dropped power3 support we can remove CONFIG_POWER3. The
usage in pgtable_32.c was already dead code as CONFIG_POWER3 was not
selectable on PPC32.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

We can continue to read the error log (up to MAX size) even if
we get the elog size more than MAX size. Hence change BUG_ON to
WARN_ON.

Also updated error message.
Reported-by: Gopesh Kumar Chaudhary <gopchaud@in.ibm.com>
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Acked-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Commit 75b57ecf refactored device tree nodes to use kobjects such that they
can be exposed via /sysfs. A secondary commit 0829f6d1 furthered this rework
by moving the kobect initialization logic out of of_node_add into its own
of_node_init function. The inital commit removed the existing kref_init calls
in the pseries dlpar code with the assumption kobject initialization would
occur in of_node_add. The second commit had the side effect of triggering a
BUG_ON during DLPAR, migration and suspend/resume operations as a result of
dynamically added nodes being uninitialized.

This patch fixes this by adding of_node_init calls in place of the previously
removed kref_init calls.

Fixes: 0829f6d1

 ("of: device_node kobject lifecycle fixes")
Cc: stable@vger.kernel.org
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Acked-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Knowing how long we spend in firmware calls is an important part of
minimising OS jitter.

This patch adds tracepoints to each OPAL call. If tracepoints are
enabled we branch out to a common routine that calls an entry and exit
tracepoint.

This allows us to write tools that monitor the frequency and duration
of OPAL calls, eg:

name                  count  total(ms)  min(ms)  max(ms)  avg(ms)  period(ms)
OPAL_HANDLE_INTERRUPT     5      0.199    0.037    0.042    0.040   12547.545
OPAL_POLL_EVENTS        204      2.590    0.012    0.036    0.013    2264.899
OPAL_PCI_MSI_EOI       2830      3.066    0.001    0.005    0.001      81.166

We use jump labels if configured, which means we only add a single
nop instruction to every OPAL call when the tracepoints are disabled.
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Now that we execute the hcall tracepoint entry and exit code out of
line, we can use the same stack across both functions.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

hcall tracepoints add quite a few instructions to our hcall path:

plpar_hcall:
	mr      r2,r2
	mfcr    r0
	stw     r0,8(r1)
	b       164		<---- start
	ld      r12,0(r2)
	std     r12,32(r1)
	cmpdi   r12,0
	beq     164		<---- end
...

We have an unconditional branch that gets noped out during boot and
a load/compare/branch. We also store the tracepoint value to the
stack for the hcall_exit path to use.

By using jump labels we can simplify this to just a single nop that
gets replaced with a branch when the tracepoint is enabled:

plpar_hcall:
	mr      r2,r2
	mfcr    r0
	stw     r0,8(r1)
	nop			<----
...

If jump labels are not enabled, we fall back to the old method.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Since a TCE page size can be other than 4K, make it configurable for
P5IOC2 and IODA PHBs.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

This makes use of iommu_table::it_page_shift instead of TCE_SHIFT and
TCE_RPN_SHIFT hardcoded values.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

This fixes IODA1/2 to use it_page_shift as it may be bigger than 4K.

This changes involved constant values to use "ull" modifier.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Commit 046d662f

 "coredump: make core dump functionality optional"
made the coredump optional, but didn't update the spufs code that
depends on it. That leads to build errors such as:

  arch/powerpc/platforms/built-in.o: In function `.spufs_arch_write_note':
  coredump.c:(.text+0x22cd4): undefined reference to `.dump_emit'
  coredump.c:(.text+0x22cf4): undefined reference to `.dump_emit'
  coredump.c:(.text+0x22d0c): undefined reference to `.dump_align'
  coredump.c:(.text+0x22d48): undefined reference to `.dump_emit'
  coredump.c:(.text+0x22e7c): undefined reference to `.dump_skip'

Fix it by adding some ifdefs in the cell code.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

They're almost a duplicate of the boards array
and we can build them at run-time.
Signed-off-by: Laurentiu Tudor <Laurentiu.Tudor@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>

Add support for Freescale T2080/T2081 QDS Development System Board.

The T2080QDS Development System is a high-performance computing,
evaluation, and development platform that supports T2080 QorIQ
Power Architecture processor, with following major features:

T2080QDS feature overview:
Processor:
 - T2080 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz
Memory:
 - Single memory controller capable of supporting DDR3 and DDR3-LP
 - Dual DIMM slots up 2133MT/s with ECC
Ethernet interfaces:
 - Two 1Gbps RGMII on-board ports
 - Four 10Gbps XFI on-board cages
 - 1Gbps/2.5Gbps SGMII Riser card
 - 10Gbps XAUI Riser card
Accelerator:
 - DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC
SerDes:
 - 16 lanes up to 10.3125GHz
 - Supports Aurora debug, PEX, SATA, SGMII, sRIO, HiGig, XFI and XAUI
IFC:
 - 128MB NOR Flash, 512MB NAND Flash, PromJet debug port and FPGA
eSPI:
 - Three SPI flash (16MB N25Q128A + 8MB EN25S64 + 512KB SST25WF040)
USB:
 - Two USB2.0 ports with internal PHY (one Type-A + one micro Type-AB)
PCIE:
 - Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0, SR-IOV)
SATA:
 - Two SATA 2.0 ports on-board
SRIO:
 - Two Serial RapidIO 2.0 ports up to 5 GHz
eSDHC:
 - Supports SD/MMC/eMMC Card
DMA:
 - Three 8-channels DMA controllers
I2C:
 - Four I2C controllers.
UART:
 - Dual 4-pins UART serial ports
System Logic:
 - QIXIS-II FPGA system controll

T2081QDS board shares the same PCB with T1040QDS with some differences.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>

m8xx_pcmcia_ops was the only thing in this file (other than a comment
that describes a usage that doesn't match the file's contents); now
that m8xx_pcmcia_ops is gone, remove the empty file.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Pantelis Antoniou <pantelis.antoniou@gmail.com>
Cc: Vitaly Bordug <vitb@kernel.crashing.org>
Cc: netdev@vger.kernel.org

This driver doesn't build, and apparently has not built since
arch/ppc was removed in 2008 (when mk_int_int_mask was removed
from asm/irq.h, among other build errors).

A few weeks ago I asked whether anyone was actively maintaining
this code, and got no positive response:
http://patchwork.ozlabs.org/patch/352082/



So, let's remove it.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Vitaly Bordug <vitb@kernel.crashing.org>
Cc: linux-pcmcia@lists.infradead.org
Cc: Paul Bolle <pebolle@tiscali.nl>

T4240RDB board Specification
----------------------------
Memory subsystem:
     6GB DDR3
     128MB NOR flash
     2GB NAND flash
Ethernet:
     Eight 1G SGMII ports
     Four 10Gbps SFP+ ports
PCIe:
     Two PCIe slots
USB:
     Two USB2.0 Type A ports
SDHC:
     One SD-card port
SATA:
     One SATA port
UART:
     Dual RJ45 ports
Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>

In commit 27f44888 "Add OPAL takeover from PowerVM" we added support
for "takeover" on OPAL v1 machines.

This was a mode of operation where we would boot under pHyp, and query
for the presence of OPAL. If detected we would then do a special
sequence to take over the machine, and the kernel would end up running
in hypervisor mode.

OPAL v1 was never a supported product, and was never shipped outside
IBM. As far as we know no one is still using it.

Newer versions of OPAL do not use the takeover mechanism. Although the
query for OPAL should be harmless on machines with newer OPAL, we have
seen a machine where it causes a crash in Open Firmware.

The code in early_init_devtree() to copy boot_command_line into cmd_line
was added in commit 817c21ad

 "Get kernel command line accross OPAL
takeover", and AFAIK is only used by takeover, so should also be
removed.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

This variable is of the wrong type, everywhere it is used it
should be an unsigned int rather than a int.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

As Ben suggested, it's meaningful to dump PE's location code
for site engineers when hitting EEH errors. The patch introduces
function eeh_pe_loc_get() to retireve the location code from
dev-tree so that we can output it when hitting EEH errors.

If primary PE bus is root bus, the PHB's dev-node would be tried
prior to root port's dev-node. Otherwise, the upstream bridge's
dev-node of the primary PE bus will be check for the location code
directly.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

This patch enables POWER8 doorbell IPIs on powernv.

Since doorbells can only IPI within a core, we test to see when we can use
doorbells and if not we fall back to XICS.  This also enables hypervisor
doorbells to wakeup us up from nap/sleep via the LPCR PECEDH bit.

Based on tests by Anton, the best case IPI latency between two threads dropped
from 894ns to 512ns.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

On PowerNV platform, EEH errors are reported by IO accessors or poller
driven by interrupt. After the PE is isolated, we won't produce EEH
event for the PE. The current implementation has possibility of EEH
event lost in this way:

The interrupt handler queues one "special" event, which drives the poller.
EEH thread doesn't pick the special event yet. IO accessors kicks in, the
frozen PE is marked as "isolated" and EEH event is queued to the list.
EEH thread runs because of special event and purge all existing EEH events.
However, we never produce an other EEH event for the frozen PE. Eventually,
the PE is marked as "isolated" and we don't have EEH event to recover it.

The patch fixes the issue to keep EEH events for PEs that have been
marked as "isolated" with the help of additional "force" help to
eeh_remove_event().
Reported-by: Rolf Brudeseth <rolfb@us.ibm.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Commit cb5b242c ("powerpc/eeh: Escalate error on non-existing PE")
escalates the frozen state on non-existing PE to fenced PHB. It
was to improve kdump reliability. After that, commit 361f2a2a
("powrpc/powernv: Reset PHB in kdump kernel") was introduced to
issue complete reset on all PHBs to increase the reliability of
kdump kernel.

Commit cb5b242c

 becomes unuseful and it would be reverted.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

When we have the corner case of frozen parent and child PE at the
same time, we have to handle the frozen parent PE prior to the
child. Without clearning the frozen state on parent PE, the child
PE can't be recovered successfully.

The patch searches the EEH PE hierarchy tree and returns the toppest
frozen PE to be handled. It ensures the frozen parent PE will be
handled prior to child PE.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

We've already dropped the default pseries timeout to 10s, do
the same for powernv.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

memory_return_from_buffer returns a signed value, so ret should be
ssize_t.

Fixes the following issue reported by David Binderman:

  [linux-3.15/arch/powerpc/platforms/powernv/opal-msglog.c:65]: (style)
  Checking if unsigned variable 'ret' is less than zero.
  [linux-3.15/arch/powerpc/platforms/powernv/opal-msglog.c:82]: (style)
  Checking if unsigned variable 'ret' is less than zero.

  Local variable "ret" is of type size_t. This is always unsigned,
  so it is pointless to check if it is less than zero.

  https://bugzilla.kernel.org/show_bug.cgi?id=77551



Fixing this exposes a real bug for the case where the entire count
bytes is successfully read from the POS_WRAP case. The second
memory_read_from_buffer will return EINVAL, causing the entire read to
return EINVAL to userspace, despite the data being copied correctly. The
fix is to test for the case where the data has been read and return
early.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

The SPUFS_CNTL_MAP_SIZE define is cut and pasted twice so we can delete
the second instance.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

EEH information fetched from OPAL need fix before using in LE environment.
To be included in sparse's endian check, declare them as __beXX and
access them by accessors.

Cc: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com>
Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Everyone can write to these files, which is not what we want.

Cc: stable@vger.kernel.org # 3.15
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Build throws following errors when CONFIG_SMP=n
arch/powerpc/platforms/powernv/subcore.c: In function ‘cpu_update_split_mode’:
arch/powerpc/platforms/powernv/subcore.c:274:15: error: ‘setup_max_cpus’ undeclared (first use in this function)
arch/powerpc/platforms/powernv/subcore.c:285:5: error: lvalue required as left operand of assignment

'setup_max_cpus' variable is relevant only on SMP, so there is no point
working around it for UP. Furthermore, subcore itself is relevant only
on SMP and hence the better solution is to exclude subcore.o and
subcore-asm.o for UP builds.
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Build throws following errors when CONFIG_SMP=n
arch/powerpc/platforms/powernv/setup.c: In function ‘pnv_kexec_wait_secondaries_down’:
arch/powerpc/platforms/powernv/setup.c:179:4: error: implicit declaration of function ‘get_hard_smp_processor_id’
    rc = opal_query_cpu_status(get_hard_smp_processor_id(i),

The usage of get_hard_smp_processor_id() needs the declaration from
<asm/smp.h>. The file setup.c includes <linux/sched.h>, which in-turn
includes <linux/smp.h>. However, <linux/smp.h> includes <asm/smp.h>
only on SMP configs and hence UP builds fail.

Fix this by directly including <asm/smp.h> in setup.c unconditionally.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

__attribute__ ((unused))

WSP is the last user of CONFIG_PPC_A2, so we remove that as well.

Although CONFIG_PPC_ICSWX still exists, it's no longer selectable for
any Book3E platform, so we can remove the code in mmu-book3e.h that
depended on it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

kbuild bot spotted that one:

  arch/powerpc/platforms/powernv/opal-lpc.c: In function 'opal_lpc_init_debugfs':
>> arch/powerpc/platforms/powernv/opal-lpc.c:319:35: error: 'powerpc_debugfs_root' undeclared (first use in this function)
     root = debugfs_create_dir("lpc", powerpc_debugfs_root);
                                      ^
We neet to include the definition explicitely.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

We pass actual buffer size to opal_validate_flash() OPAL API call
and in return it contains output buffer size.

Commit cc146d1d

 (Fix little endian issues) missed to set the size
param before making OPAL call. So firmware image validation fails.

This patch sets size variable before making OPAL call.
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Tested-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

The hcall macros may call out to c code for tracing, so we need
to set up a valid r2. This fixes an oops found when testing
ibmvscsi as a module.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc sets a low SECTION_SIZE_BITS to accomodate small pseries
boxes. We default to 16MB memory blocks, and boxes with a lot
of memory end up with enormous numbers of sysfs memory nodes.

Set a more reasonable default for powernv of 256MB.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

The pseries platform code unconditionally overrides
memory_block_size_bytes regardless of the running platform.

Create a ppc_md hook that so each platform can choose to
do what it wants.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

struct OpalMemoryErrorData is passed to us from firmware, so we
have to byteswap it.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>