1. 13 Feb, 2012 1 commit
  2. 26 Jan, 2012 5 commits
  3. 05 Jan, 2012 3 commits
  4. 14 Dec, 2011 1 commit
    • Govindraj.R's avatar
      ARM: OMAP2+: UART: Add default mux for all uarts. · 7496ba30
      Govindraj.R authored
      
      
      Padconf wakeup is used to wakeup uart after uart fclks/iclks are gated.
      Rx-Pad wakeup was done by writing to rx-pad offset value populated in
      serial.c idle_init. Remove the direct reading and writing into rx pad.
      Remove the padconf field part of omap_uart_state struct and pad offsets
      populated.
      
      Now with mux framework support we can use mux_utilities
      along with hmwod framework to handle io-pad configuration and enable rx-pad
      wake-up mechanism.
      
      To avoid breaking any board support add default mux data for all uart's
      if mux info is not passed from board file.
      With the default pads populated in serial.c wakeup capability for
      rx pads is set, this can be used to enable uart_rx io-pad wakeup from
      hwmod framework. The pad values in 3430sdp/4430sdp/omap4panda board file
      are same as the default pad values populated in serial.c. Remove pad values
      from 3430sdp/4430sdp/omap4panda board file and use the default pads
      from serial.c file.
      Signed-off-by: default avatarGovindraj.R <govindraj.raja@ti.com>
      Signed-off-by: default avatarKevin Hilman <khilman@ti.com>
      7496ba30
  5. 13 Dec, 2011 1 commit
  6. 09 Dec, 2011 1 commit
  7. 17 Nov, 2011 1 commit
  8. 15 Nov, 2011 1 commit
  9. 03 Oct, 2011 1 commit
  10. 30 Sep, 2011 4 commits
  11. 27 Sep, 2011 1 commit
  12. 24 Aug, 2011 2 commits
    • Tony Lindgren's avatar
      ARM: OMAP: Introduce SoC specific early_init · 8f5b5a41
      Tony Lindgren authored
      
      
      Introduce them for each omap variant and just make them all call
      omap2_init_common_infrastructure for now. Do this for each board-*.c
      file except for board-generic and board-omap3beagle as they use
      the same machine ID for multiple SoCs.
      
      No functional changes.
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      8f5b5a41
    • Tony Lindgren's avatar
      ARM: OMAP: Move omap2_init_common_devices out of init_early · a4ca9dbe
      Tony Lindgren authored
      
      
      There's no need to call omap2_init_common_devices from init_early.
      
      It no longer does anything else except reprogram the memory timings
      for some boards, so it's better to do it later so we have a chance
      to get console messages if something goes wrong.
      
      Move it to happen after omap_serial_init gets called. And while
      patching it anyways, rename it to omap_sdrc_init as suggested by
      Benoit Cousson <b-cousson@ti.com>.
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      a4ca9dbe
  13. 21 Aug, 2011 1 commit
  14. 05 Jul, 2011 3 commits
  15. 04 Jul, 2011 3 commits
  16. 27 Jun, 2011 1 commit
  17. 20 Jun, 2011 1 commit
    • Tony Lindgren's avatar
      omap: Set separate timer init functions to avoid cpu_is_omap tests · e74984e4
      Tony Lindgren authored
      
      
      This is needed for the following patches so we can initialize the
      rest of the hardware timers later on.
      
      As with the init_irq calls, there's no need to do cpu_is_omap calls
      during the timer init as we only care about the major omap generation.
      This means that we can initialize the sys_timer with the .timer
      entries alone.
      
      Note that for now we just set stubs for the various sys_timer entries
      that will get populated in a later patch. The following patches will
      also remove the omap_dm_timer_init calls and change the init for the
      rest of the hardware timers to happen with an arch_initcall.
      Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
      Reviewed-by: default avatarKevin Hilman <khilman@ti.com>
      e74984e4
  18. 14 Jun, 2011 1 commit
  19. 01 Jun, 2011 2 commits
  20. 31 May, 2011 1 commit
  21. 12 May, 2011 1 commit
  22. 11 May, 2011 2 commits
  23. 03 May, 2011 1 commit
  24. 23 Mar, 2011 1 commit