1. 27 Sep, 2015 2 commits
    • Olof Johansson's avatar
      Merge tag 'pxa-fixes-v4.3' of https://github.com/rjarzmik/linux into fixes · e46fc90e
      Olof Johansson authored
      ARM: pxa: fixes for v4.3
      
      These fixes are mainly regression fixes triggered by irq changes,
      common clock framework introduction and sound side-effect of
      other platforms.
      
      * tag 'pxa-fixes-v4.3' of https://github.com/rjarzmik/linux
      
      :
        ARM: pxa: balloon3: Fix build error
        ARM: pxa: ssp: Fix build error by removing originally incorrect DT binding
        ARM: pxa: fix DFI bus lockups on startup
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      e46fc90e
    • Olof Johansson's avatar
      Merge tag 'omap-for-v4.3/fixes-rc2' of... · b8ba826f
      Olof Johansson authored
      Merge tag 'omap-for-v4.3/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
      
      Fixes for omaps for v4.3-rc cycle:
      
      - Two more patches to fix most of the MMC regressions with the
        PBIAS regulator changes. At least two MMC driver related issues
        still seems to remain for omap3 legacy booting and omap4 duovero.
        Note that the dts changes depend on a recent regulator fix, and
        are based on the regulator commit now in mainline kernel
      
      - Enable autoidle for am43xx clocks to prevent clocks from staying
        always on
      
      - Fix i2c5 pinctrl offsets for omap5-uevm
      
      - Enable PCA953X as that's needed for HDMI to work on omap5
      
      - Update phy supplies for beagle x15 beta board
      
      - Use palmas-usb for on beagle x15 to start using the related
        driver that recently got merged
      
      * tag 'omap-for-v4.3/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap
      
      :
        ARM: dts: fix omap2+ address translation for pbias
        ARM: dts: am57xx-beagle-x15: use palmas-usb for USB2
        ARM: omap2plus_defconfig: enable GPIO_PCA953X
        ARM: dts: omap5-uevm.dts: fix i2c5 pinctrl offsets
        ARM: OMAP2+: AM43XX: Enable autoidle for clks in am43xx_init_late
        ARM: dts: am57xx-beagle-x15: Update Phy supplies
        regulator: pbias: program pbias register offset in pbias driver
        ARM: omap2plus_defconfig: Enable MUSB DMA support
        ARM: DRA752: Add ID detect for ES2.0
        ARM: OMAP3: vc: fix 'or' always true warning
        ARM: OMAP2+: Fix booting if no timer parent clock is available
        ARM: OMAP2+: omap-device: fix race deferred probe of omap_hsmmc vs omap_device_late_init
      Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
      b8ba826f
  2. 24 Sep, 2015 5 commits
  3. 23 Sep, 2015 1 commit
  4. 17 Sep, 2015 5 commits
  5. 16 Sep, 2015 2 commits
    • Axel Lin's avatar
      ARM: pxa: balloon3: Fix build error · 385877c0
      Axel Lin authored
      irq_data_get_chip() function does not exist, call irq_desc_get_chip()
      instead.
      
      Fixes: 9ec97561
      
       ("ARM/pxa: Prepare balloon3_irq_handler for irq argument removal")
      Signed-off-by: default avatarAxel Lin <axel.lin@ingics.com>
      Signed-off-by: default avatarRobert Jarzmik <robert.jarzmik@free.fr>
      385877c0
    • Kevin Hilman's avatar
      Merge tag 'omap-for-v4.3/fixes-rc1' of... · 54c3cf65
      Kevin Hilman authored
      Merge tag 'omap-for-v4.3/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
      
      Merge "omap fixes against v4.3-rc1" from Tony Lindgren:
      
      Fixes for omaps against v4.3-rc1:
      
      - Fix long time regression on beagle for tfp410 pin muxing
      
      - Fix dm814x control base address typo and related Ethernet
        phy configuration
      
      - Fix igepv2 Ethernet pinmuxing as only some boards have it
      
      - Fix pbias regulator compatible values as a pending regulator
        fix needs those for MMC1 to work properly
      
      - Fix beagle-x15 MMC1 regulator and make pcf857x built-in
      
      - Fix omap5 and dra7 Kconfig options when built as the only
        SoCs selected
      
      - Fix PM errata for omap5 and dra7 as they too need it
      
      - Fix phycore mpu voltage
      
      Also included are a few cosmetic fixes:
      
      - Remove unused of_irq macros
      
      - Fix dra7 ethernet name
      
      * tag 'omap-for-v4.3/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
        ARM: dts: Fixup model name for HP t410 dts
        ARM: dts: DRA7: fix a typo in ethernet
        ARM: omap2plus_defconfig: make PCF857x built-in
        ARM: dts: Use ti,pbias compatible string for pbias
        ARM: OMAP5: Cleanup options for SoC only build
        ARM: DRA7: Select missing options for SoC only build
        ARM: OMAP2+: board-generic: Remove stale of_irq macros
        ARM: OMAP4+: PM: erratum is used by OMAP5 and DRA7 as well
        ARM: dts: omap3-igep: Move eth IRQ pinmux to IGEPv2 common dtsi
        ARM: dts: am57xx-beagle-x15: Add wakeup irq for mcp79410
        ARM: dts: am335x-phycore-som: Fix mpu voltage
        ARM: dts: am57xx-beagle-x15: Fix regulator populated in MMC1 dt node
        ARM: dts: Fix dm814x control base to properly initialize Ethernet PHY
        ARM: dts: omap3-beagle: make i2c3, ddc and tfp410 gpio work again
      54c3cf65
  6. 14 Sep, 2015 15 commits
  7. 13 Sep, 2015 3 commits
  8. 12 Sep, 2015 7 commits
    • Linus Torvalds's avatar
      Linux 4.3-rc1 · 6ff33f39
      Linus Torvalds authored
      6ff33f39
    • Linus Torvalds's avatar
      Merge tag 'cris-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris · 6917b51d
      Linus Torvalds authored
      Pull CRIS updates from Jesper Nilsson:
       "Mostly removal of old cruft of which we can use a generic version, or
        fixes for code not commonly run in the cris port, but also additions
        to enable some good debug"
      
      * tag 'cris-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris: (25 commits)
        CRISv10: delete unused lib/dmacopy.c
        CRISv10: delete unused lib/old_checksum.c
        CRIS: fix switch_mm() lockdep splat
        CRISv32: enable LOCKDEP_SUPPORT
        CRIS: add STACKTRACE_SUPPORT
        CRISv32: annotate irq enable in idle loop
        CRISv32: add support for irqflags tracing
        CRIS: UAPI: use generic types.h
        CRIS: UAPI: use generic shmbuf.h
        CRIS: UAPI: use generic msgbuf.h
        CRIS: UAPI: use generic socket.h
        CRIS: UAPI: use generic sembuf.h
        CRIS: UAPI: use generic sockios.h
        CRIS: UAPI: use generic auxvec.h
        CRIS: UAPI: use generic headers via Kbuild
        CRIS: UAPI: fix elf.h export
        CRIS: don't make asm/elf.h depend on asm/user.h
        CRIS: UAPI: fix ptrace.h
        CRISv32: Squash compile warnings for axisflashmap
        CRISv32: Add GPIO driver to the default configs
        ...
      6917b51d
    • Linus Torvalds's avatar
      blk: rq_data_dir() should not return a boolean · 10fbd36e
      Linus Torvalds authored
      rq_data_dir() returns either READ or WRITE (0 == READ, 1 == WRITE), not
      a boolean value.
      
      Now, admittedly the "!= 0" doesn't really change the value (0 stays as
      zero, 1 stays as one), but it's not only redundant, it confuses gcc, and
      causes gcc to warn about the construct
      
          switch (rq_data_dir(req)) {
              case READ:
                  ...
              case WRITE:
                  ...
      
      that we have in a few drivers.
      
      Now, the gcc warning is silly and stupid (it seems to warn not about the
      switch value having a different type from the case statements, but about
      _any_ boolean switch value), but in this case the code itself is silly
      and stupid too, so let's just change it, and get rid of warnings like
      this:
      
        drivers/block/hd.c: In function ‘hd_request’:
        drivers/block/hd.c:630:11: warning: switch condition has boolean value [-Wswitch-bool]
           switch (rq_data_dir(req)) {
      
      The odd '!= 0' came in when "cmd_flags" got turned into a "u64" in
      commit 5953316d
      
       ("block: make rq->cmd_flags be 64-bit") and is
      presumably because the old code (that just did a logical 'and' with 1)
      would then end up making the type of rq_data_dir() be u64 too.
      
      But if we want to retain the old regular integer type, let's just cast
      the result to 'int' rather than use that rather odd '!= 0'.
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      10fbd36e
    • Linus Torvalds's avatar
      Merge branch 'writeback-plugging' · e1df8b0a
      Linus Torvalds authored
      Fix up the writeback plugging introduced in commit d353d758
      ("writeback: plug writeback at a high level") that then caused problems
      due to the unplug happening with a spinlock held.
      
      * writeback-plugging:
        writeback: plug writeback in wb_writeback() and writeback_inodes_wb()
        Revert "writeback: plug writeback at a high level"
      e1df8b0a
    • Linus Torvalds's avatar
      writeback: plug writeback in wb_writeback() and writeback_inodes_wb() · 505a666e
      Linus Torvalds authored
      
      
      We had to revert the pluggin in writeback_sb_inodes() because the
      wb->list_lock is held, but we could easily plug at a higher level before
      taking that lock, and unplug after releasing it.  This does that.
      
      Chris will run performance numbers, just to verify that this approach is
      comparable to the alternative (we could just drop and re-take the lock
      around the blk_finish_plug() rather than these two commits.
      
      I'd have preferred waiting for actual performance numbers before picking
      one approach over the other, but I don't want to release rc1 with the
      known "sleeping function called from invalid context" issue, so I'll
      pick this cleanup version for now.  But if the numbers show that we
      really want to plug just at the writeback_sb_inodes() level, and we
      should just play ugly games with the spinlock, we'll switch to that.
      
      Cc: Chris Mason <clm@fb.com>
      Cc: Josef Bacik <jbacik@fb.com>
      Cc: Dave Chinner <david@fromorbit.com>
      Cc: Neil Brown <neilb@suse.de>
      Cc: Jan Kara <jack@suse.cz>
      Cc: Christoph Hellwig <hch@lst.de>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      505a666e
    • Linus Torvalds's avatar
      thermal: fix intel PCH thermal driver mismerge · dfb22fc5
      Linus Torvalds authored
      I didn't notice this when merging the thermal code from Zhang, but his
      merge (commit 5a924a07: "Merge branches 'thermal-core' and
      'thermal-intel' of .git into next") of the thermal-core and
      thermal-intel branches was wrong.
      
      In thermal-core, commit 17e8351a ("thermal: consistently use int for
      temperatures") converted the thermal layer to use "int" for
      temperatures.
      
      But in parallel, in the thermal-intel branch commit d0a12625
      
      
      ("thermal: Add Intel PCH thermal driver") added support for the intel
      PCH thermal sensor using the old interfaces that used "unsigned long"
      pointers.
      
      This resulted in warnings like this:
      
        drivers/thermal/intel_pch_thermal.c:184:14: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types]
          .get_temp = pch_thermal_get_temp,
                      ^
        drivers/thermal/intel_pch_thermal.c:184:14: note: (near initialization for ‘tzd_ops.get_temp’)
        drivers/thermal/intel_pch_thermal.c:186:19: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types]
          .get_trip_temp = pch_get_trip_temp,
                           ^
        drivers/thermal/intel_pch_thermal.c:186:19: note: (near initialization for ‘tzd_ops.get_trip_temp’)
      
      This fixes it.
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      dfb22fc5
    • Linus Torvalds's avatar
      Merge branch 'akpm' (patches from Andrew) · 01b0c014
      Linus Torvalds authored
      Merge fourth patch-bomb from Andrew Morton:
      
       - sys_membarier syscall
      
       - seq_file interface changes
      
       - a few misc fixups
      
      * emailed patches from Andrew Morton <akpm@linux-foundation.org>:
        revert "ocfs2/dlm: use list_for_each_entry instead of list_for_each"
        mm/early_ioremap: add explicit #include of asm/early_ioremap.h
        fs/seq_file: convert int seq_vprint/seq_printf/etc... returns to void
        selftests: enhance membarrier syscall test
        selftests: add membarrier syscall test
        sys_membarrier(): system-wide memory barrier (generic, x86)
        MODSIGN: fix a compilation warning in extract-cert
      01b0c014