Commit 038a5008 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (867 commits)
  [SKY2]: status polling loop (post merge)
  [NET]: Fix NAPI completion handling in some drivers.
  [TCP]: Limit processing lost_retrans loop to work-to-do cases
  [TCP]: Fix lost_retrans loop vs fastpath problems
  [TCP]: No need to re-count fackets_out/sacked_out at RTO
  [TCP]: Extract tcp_match_queue_to_sack from sacktag code
  [TCP]: Kill almost unused variable pcount from sacktag
  [TCP]: Fix mark_head_lost to ignore R-bit when trying to mark L
  [TCP]: Add bytes_acked (ABC) clearing to FRTO too
  [IPv6]: Update setsockopt(IPV6_MULTICAST_IF) to support RFC 3493, try2
  [NETFILTER]: x_tables: add missing ip6t_modulename aliases
  [NETFILTER]: nf_conntrack_tcp: fix connection reopening
  [QETH]: fix qeth_main.c
  [NETLINK]: fib_frontend build fixes
  [IPv6]: Export userland ND options through netlink (RDNSS support)
  [9P]: build fix with !CONFIG_SYSCTL
  [NET]: Fix dev_put() and dev_hold() comments
  [NET]: make netlink user -> kernel interface synchronious
  [NET]: unify netlink kernel socket recognition
  [NET]: cleanup 3rd argument in netlink_sendskb
  ...

Fix up conflicts manually in Documentation/feature-removal-schedule.txt
and my new least favourite crap, the "mod_devicetable" support in the
files include/linux/mod_devicetable.h and scripts/mod/file2alias.c.

(The latter files seem to be explicitly _designed_ to get conflicts when
different subsystems work with them - that have an absolutely horrid
lack of subsystem separation!)
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parents dd6d1844 26691830

Too many changes to show.

To preserve performance only 1000 of 1000+ files are displayed.
......@@ -665,6 +665,11 @@ D: Minor updates to SCSI types, added /proc/pid/maps protection
S: (ask for current address)
S: USA
N: Robin Cornelius
E: robincornelius@users.sourceforge.net
D: Ralink rt2x00 WLAN driver
S: Cornwall, U.K.
N: Mark Corner
E: mcorner@umich.edu
W: http://www.eecs.umich.edu/~mcorner/
......@@ -679,6 +684,11 @@ D: Kernel module SMART utilities
S: Santa Cruz, California
S: USA
N: Luis Correia
E: lfcorreia@users.sf.net
D: Ralink rt2x00 WLAN driver
S: Belas, Portugal
N: Alan Cox
W: http://www.linux.org.uk/diary/
D: Linux Networking (0.99.10->2.0.29)
......@@ -833,6 +843,12 @@ S: Lancs
S: PR4 6AX
S: United Kingdom
N: Ivo van Doorn
E: IvDoorn@gmail.com
W: http://www.mendiosus.nl
D: Ralink rt2x00 WLAN driver
S: Haarlem, The Netherlands
N: John G Dorsey
E: john+@cs.cmu.edu
D: ARM Linux ports to Assabet/Neponset, Spot
......@@ -3517,6 +3533,12 @@ S: Maastrichterweg 63
S: 5554 GG Valkenswaard
S: The Netherlands
N: Mark Wallis
E: mwallis@serialmonkey.com
W: http://mark.serialmonkey.com
D: Ralink rt2x00 WLAN driver
S: Newcastle, Australia
N: Peter Shaobo Wang
E: pwang@mmdcorp.com
W: http://www.mmdcorp.com/pw/linux
......@@ -3651,6 +3673,15 @@ S: Alte Regensburger Str. 11a
S: 93149 Nittenau
S: Germany
N: Gertjan van Wingerde
E: gwingerde@home.nl
D: Ralink rt2x00 WLAN driver
D: Minix V2 file-system
D: Misc fixes
S: Geessinkweg 177
S: 7544 TX Enschede
S: The Netherlands
N: Lars Wirzenius
E: liw@iki.fi
D: Linux System Administrator's Guide, author, former maintainer
......
......@@ -240,17 +240,23 @@ X!Ilib/string.c
<sect1><title>Driver Support</title>
!Enet/core/dev.c
!Enet/ethernet/eth.c
!Enet/sched/sch_generic.c
!Iinclude/linux/etherdevice.h
!Iinclude/linux/netdevice.h
</sect1>
<sect1><title>PHY Support</title>
!Edrivers/net/phy/phy.c
!Idrivers/net/phy/phy.c
!Edrivers/net/phy/phy_device.c
!Idrivers/net/phy/phy_device.c
!Edrivers/net/phy/mdio_bus.c
!Idrivers/net/phy/mdio_bus.c
</sect1>
<!-- FIXME: Removed for now since no structured comments in source
<sect1><title>Wireless</title>
X!Enet/core/wireless.c
-->
</sect1>
-->
<sect1><title>Synchronous PPP</title>
!Edrivers/net/wan/syncppp.c
</sect1>
......
......@@ -314,3 +314,16 @@ Why: The i386/x86_64 merge provides a symlink to the old bzImage
location so not yet updated user space tools, e.g. package
scripts, do not break.
Who: Thomas Gleixner <tglx@linutronix.de>
---------------------------
What: shaper network driver
When: January 2008
Files: drivers/net/shaper.c, include/linux/if_shaper.h
Why: This driver has been marked obsolete for many years.
It was only designed to work on lower speed links and has design
flaws that lead to machine crashes. The qdisc infrastructure in
2.4 or later kernels, provides richer features and is more robust.
Who: Stephen Hemminger <shemminger@linux-foundation.org>
---------------------------
This diff is collapsed.
......@@ -38,8 +38,13 @@ Socket options
DCCP_SOCKOPT_SERVICE sets the service. The specification mandates use of
service codes (RFC 4340, sec. 8.1.2); if this socket option is not set,
the socket will fall back to 0 (which means that no meaningful service code
is present). Connecting sockets set at most one service option; for
listening sockets, multiple service codes can be specified.
is present). On active sockets this is set before connect(); specifying more
than one code has no effect (all subsequent service codes are ignored). The
case is different for passive sockets, where multiple service codes (up to 32)
can be set before calling bind().
DCCP_SOCKOPT_GET_CUR_MPS is read-only and retrieves the current maximum packet
size (application payload size) in bytes, see RFC 4340, section 14.
DCCP_SOCKOPT_SEND_CSCOV and DCCP_SOCKOPT_RECV_CSCOV are used for setting the
partial checksum coverage (RFC 4340, sec. 9.2). The default is that checksums
......@@ -50,12 +55,13 @@ be enabled at the receiver, too with suitable choice of CsCov.
DCCP_SOCKOPT_SEND_CSCOV sets the sender checksum coverage. Values in the
range 0..15 are acceptable. The default setting is 0 (full coverage),
values between 1..15 indicate partial coverage.
DCCP_SOCKOPT_SEND_CSCOV is for the receiver and has a different meaning: it
DCCP_SOCKOPT_RECV_CSCOV is for the receiver and has a different meaning: it
sets a threshold, where again values 0..15 are acceptable. The default
of 0 means that all packets with a partial coverage will be discarded.
Values in the range 1..15 indicate that packets with minimally such a
coverage value are also acceptable. The higher the number, the more
restrictive this setting (see [RFC 4340, sec. 9.2.1]).
restrictive this setting (see [RFC 4340, sec. 9.2.1]). Partial coverage
settings are inherited to the child socket after accept().
The following two options apply to CCID 3 exclusively and are getsockopt()-only.
In either case, a TFRC info struct (defined in <linux/tfrc.h>) is returned.
......@@ -112,9 +118,14 @@ tx_qlen = 5
The size of the transmit buffer in packets. A value of 0 corresponds
to an unbounded transmit buffer.
sync_ratelimit = 125 ms
The timeout between subsequent DCCP-Sync packets sent in response to
sequence-invalid packets on the same socket (RFC 4340, 7.5.4). The unit
of this parameter is milliseconds; a value of 0 disables rate-limiting.
Notes
=====
DCCP does not travel through NAT successfully at present on many boxes. This is
because the checksum covers the psuedo-header as per TCP and UDP. Linux NAT
because the checksum covers the pseudo-header as per TCP and UDP. Linux NAT
support for DCCP has been added.
The Digi International RightSwitch SE-X (dgrs) Device Driver
This is a Linux driver for the Digi International RightSwitch SE-X
EISA and PCI boards. These are 4 (EISA) or 6 (PCI) port Ethernet
switches and a NIC combined into a single board. This driver can
be compiled into the kernel statically or as a loadable module.
There is also a companion management tool, called "xrightswitch".
The management tool lets you watch the performance graphically,
as well as set the SNMP agent IP and IPX addresses, IEEE Spanning
Tree, and Aging time. These can also be set from the command line
when the driver is loaded. The driver command line options are:
debug=NNN Debug printing level
dma=0/1 Disable/Enable DMA on PCI card
spantree=0/1 Disable/Enable IEEE spanning tree
hashexpire=NNN Change address aging time (default 300 seconds)
ipaddr=A,B,C,D Set SNMP agent IP address i.e. 199,86,8,221
iptrap=A,B,C,D Set SNMP agent IP trap address i.e. 199,86,8,221
ipxnet=NNN Set SNMP agent IPX network number
nicmode=0/1 Disable/Enable multiple NIC mode
There is also a tool for setting up input and output packet filters
on each port, called "dgrsfilt".
Both the management tool and the filtering tool are available
separately from the following FTP site:
ftp://ftp.dgii.com/drivers/rightswitch/linux/
When nicmode=1, the board and driver operate as 4 or 6 individual
NIC ports (eth0...eth5) instead of as a switch. All switching
functions are disabled. In the future, the board firmware may include
a routing cache when in this mode.
Copyright 1995-1996 Digi International Inc.
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
For information on purchasing a RightSwitch SE-4 or SE-6
board, please contact Digi's sales department at 1-612-912-3444
or 1-800-DIGIBRD. Outside the U.S., please check our Web page at:
http://www.dgii.com
for sales offices worldwide. Tech support is also available through
the channels listed on the Web site, although as long as I am
employed on networking products at Digi I will be happy to provide
any bug fixes that may be needed.
-Rick Richardson, rick@dgii.com
......@@ -180,13 +180,20 @@ tcp_fin_timeout - INTEGER
to live longer. Cf. tcp_max_orphans.
tcp_frto - INTEGER