Commit 59c51591 authored by Michael Opdenacker's avatar Michael Opdenacker Committed by Adrian Bunk
Browse files

Fix occurrences of "the the "


Signed-off-by: default avatarMichael Opdenacker <michael@free-electrons.com>
Signed-off-by: default avatarAdrian Bunk <bunk@stusta.de>
parent 02a3e59a
......@@ -6,7 +6,7 @@ Description:
races, contains a naming policy within the kernel that is
against the LSB, and can be replaced by using udev.
The files fs/devfs/*, include/linux/devfs_fs*.h were removed,
along with the the assorted devfs function calls throughout the
along with the assorted devfs function calls throughout the
kernel tree.
Users:
......@@ -125,7 +125,7 @@ three different ways to find such a match:
usually register later during booting, or by module loading.
- Registering a driver using platform_driver_probe() works just like
using platform_driver_register(), except that the the driver won't
using platform_driver_register(), except that the driver won't
be probed later if another device registers. (Which is OK, since
this interface is only for use with non-hotpluggable devices.)
......@@ -30,7 +30,7 @@ The communication layer exists to allow NetLabel configuration and monitoring
from user space. The NetLabel communication layer uses a message based
protocol built on top of the Generic NETLINK transport mechanism. The exact
formatting of these NetLabel messages as well as the Generic NETLINK family
names can be found in the the 'net/netlabel/' directory as comments in the
names can be found in the 'net/netlabel/' directory as comments in the
header files as well as in 'include/net/netlabel.h'.
* Security Module API
......
......@@ -373,7 +373,7 @@ E.g. clearing pending interrupts.
3.6 Register IRQ handler
~~~~~~~~~~~~~~~~~~~~~~~~
While calling request_irq() is the the last step described here,
While calling request_irq() is the last step described here,
this is often just another intermediate step to initialize a device.
This step can often be deferred until the device is opened for use.
......
......@@ -1444,7 +1444,7 @@ platforms are moved over to use the flattened-device-tree model.
Basically, it is a bus of devices, that could act more or less
as a complete entity (UCC, USB etc ). All of them should be siblings on
the "root" qe node, using the common properties from there.
The description below applies to the the qe of MPC8360 and
The description below applies to the qe of MPC8360 and
more nodes and properties would be extended in the future.
i) Root QE device
......
......@@ -92,7 +92,7 @@ cflags-y += -ffreestanding
# when fed the toolchain default!
#
# Certain gcc versions upto gcc 4.1.1 (probably 4.2-subversion as of
# 2006-10-10 don't properly change the the predefined symbols if -EB / -EL
# 2006-10-10 don't properly change the predefined symbols if -EB / -EL
# are used, so we kludge that here. A bug has been filed at
# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=29413.
#
......
......@@ -14,7 +14,7 @@
#include <linux/pci.h>
/*
* Set the the BCM1250, etc. PCI host bridge's TRDY timeout
* Set the BCM1250, etc. PCI host bridge's TRDY timeout
* to the finite max.
*/
static void __init quirk_sb1250_pci(struct pci_dev *dev)
......@@ -35,7 +35,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIBYTE, PCI_DEVICE_ID_BCM1250_HT,
quirk_sb1250_ht);
/*
* Set the the SP1011 HT/PCI bridge's TRDY timeout to the finite max.
* Set the SP1011 HT/PCI bridge's TRDY timeout to the finite max.
*/
static void __init quirk_sp1011(struct pci_dev *dev)
{
......
......@@ -74,7 +74,7 @@ static void spider_io_flush(const volatile void __iomem *addr)
/* Fast path if we have a non-0 token, it indicates which bus we
* are on.
*
* If the token is 0, that means either the the ioremap was done
* If the token is 0, that means either that the ioremap was done
* before we initialized this layer, or it's a PIO operation. We
* fallback to a low path in this case. Hopefully, internal devices
* which are ioremap'ed early should use in_XX/out_XX functions
......
......@@ -523,7 +523,7 @@ END(ret_from_trap)
/* This the initial entry point for a new child thread, with an appropriate
stack in place that makes it look the the child is in the middle of an
stack in place that makes it look that the child is in the middle of an
syscall. This function is actually `returned to' from switch_thread
(copy_thread makes ret_from_fork the return address in each new thread's
saved context). */
......
......@@ -1704,7 +1704,7 @@ EXPORT_SYMBOL(blk_stop_queue);
* on a queue, such as calling the unplug function after a timeout.
* A block device may call blk_sync_queue to ensure that any
* such activity is cancelled, thus allowing it to release resources
* the the callbacks might use. The caller must already have made sure
* that the callbacks might use. The caller must already have made sure
* that its ->make_request_fn will not re-add plugging prior to calling
* this function.
*
......
......@@ -151,7 +151,7 @@ static int ramdisk_commit_write(struct file *file, struct page *page,
}
/*
* ->writepage to the the blockdev's mapping has to redirty the page so that the
* ->writepage to the blockdev's mapping has to redirty the page so that the
* VM doesn't go and steal it. We return AOP_WRITEPAGE_ACTIVATE so that the VM
* won't try to (pointlessly) write the page again for a while.
*
......
......@@ -65,7 +65,7 @@ int drm_dma_setup(drm_device_t * dev)
* \param dev DRM device.
*
* Free all pages associated with DMA buffers, the buffers and pages lists, and
* finally the the drm_device::dma structure itself.
* finally the drm_device::dma structure itself.
*/
void drm_dma_takedown(drm_device_t * dev)
{
......
......@@ -157,7 +157,7 @@ static __inline__ struct page *drm_do_vm_nopage(struct vm_area_struct *vma,
* \param address access address.
* \return pointer to the page structure.
*
* Get the the mapping, find the real physical page to map, get the page, and
* Get the mapping, find the real physical page to map, get the page, and
* return it.
*/
static __inline__ struct page *drm_do_vm_shm_nopage(struct vm_area_struct *vma,
......
......@@ -293,7 +293,7 @@ I am fairly certain that they are correct unless stated otherwise in comments.
# define R300_PVS_CNTL_1_PROGRAM_START_SHIFT 0
# define R300_PVS_CNTL_1_POS_END_SHIFT 10
# define R300_PVS_CNTL_1_PROGRAM_END_SHIFT 20
/* Addresses are relative the the vertex program parameters area. */
/* Addresses are relative to the vertex program parameters area. */
#define R300_VAP_PVS_CNTL_2 0x22D4
# define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0
# define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT 16
......
......@@ -1114,7 +1114,7 @@ static ssize_t cmm_write(struct file *filp, const char __user *buf,
/*
* wait for atr to become valid.
* note: it is important to lock this code. if we dont, the monitor
* could be run between test_bit and the the call the sleep on the
* could be run between test_bit and the call to sleep on the
* atr-queue. if *then* the monitor detects atr valid, it will wake up
* any process on the atr-queue, *but* since we have been interrupted,
* we do not yet sleep on this queue. this would result in a missed
......
......@@ -831,7 +831,7 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
/*
* Now set up the hw. We have to do this ourselves as
* the MMIO layout isnt the same as the the standard port
* the MMIO layout isnt the same as the standard port
* based I/O
*/
......
......@@ -1702,7 +1702,7 @@ static int nodemgr_host_thread(void *__hi)
generation = get_hpsb_generation(host);
/* If we get a reset before we are done waiting, then
* start the the waiting over again */
* start the waiting over again */
if (generation != g)
g = generation, i = 0;
}
......
......@@ -216,7 +216,7 @@ typedef struct
#define SERIAL_HOOK_RING 0x85
#define SERIAL_HOOK_DETACH 0x8f
unsigned char Flags; /* function refinements */
/* parameters passed by the the ATTACH request */
/* parameters passed by the ATTACH request */
SERIAL_INT_CB InterruptHandler; /* called on each interrupt */
SERIAL_DPC_CB DeferredHandler; /* called on hook state changes */
void *HandlerContext; /* context for both handlers */
......
......@@ -1217,11 +1217,11 @@ usb_init(hfcusb_data * hfc)
/* aux = output, reset off */
write_usb(hfc, HFCUSB_CIRM, 0x10);
/* set USB_SIZE to match the the wMaxPacketSize for INT or BULK transfers */
/* set USB_SIZE to match the wMaxPacketSize for INT or BULK transfers */
write_usb(hfc, HFCUSB_USB_SIZE,
(hfc->packet_size / 8) | ((hfc->packet_size / 8) << 4));
/* set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers */
/* set USB_SIZE_I to match the wMaxPacketSize for ISO transfers */
write_usb(hfc, HFCUSB_USB_SIZE_I, hfc->iso_packet_size);
/* enable PCM/GCI master mode */
......
......@@ -3,7 +3,7 @@
* Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de)
* see dvb-usb-init.c for copyright information.
*
* This file contains functions for initializing the the input-device and for handling remote-control-queries.
* This file contains functions for initializing the input-device and for handling remote-control-queries.
*/
#include "dvb-usb-common.h"
#include <linux/usb/input.h>
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment