Commit 5e787f75 authored by Daniel Kim's avatar Daniel Kim Committed by John W. Linville
Browse files

brcmfmac: Don't control mpc setting during scan operation



Instead of controlling mpc setting during scan operation, initialize
mpc setting and then let firmware take care of it.
Reviewed-by: default avatarPieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: default avatarHante Meuleman <meuleman@broadcom.com>
Signed-off-by: default avatarDaniel Kim <dekim@broadcom.com>
[arend@broadcom.com: keep mpc setting for bcm4329]
Signed-off-by: default avatarArend van Spriel <arend@broadcom.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 2bb443d9
......@@ -282,6 +282,13 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp)
ptr = strrchr(buf, ' ') + 1;
strlcpy(ifp->drvr->fwver, ptr, sizeof(ifp->drvr->fwver));
/* set mpc */
err = brcmf_fil_iovar_int_set(ifp, "mpc", 1);
if (err) {
brcmf_err("failed setting mpc\n");
goto done;
}
/*
* Setup timeout if Beacons are lost and roam is off to report
* link down
......
......@@ -590,6 +590,12 @@ static struct wireless_dev *brcmf_cfg80211_add_iface(struct wiphy *wiphy,
}
}
static void brcmf_scan_config_mpc(struct brcmf_if *ifp, int mpc)
{
if ((brcmf_get_chip_info(ifp) >> 4) == 0x4329)
brcmf_set_mpc(ifp, mpc);
}
void brcmf_set_mpc(struct brcmf_if *ifp, int mpc)
{
s32 err = 0;
......@@ -643,7 +649,7 @@ s32 brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg,
brcmf_err("Scan abort failed\n");
}
brcmf_set_mpc(ifp, 1);
brcmf_scan_config_mpc(ifp, 1);
/*
* e-scan can be initiated by scheduled scan
......@@ -922,7 +928,7 @@ brcmf_do_escan(struct brcmf_cfg80211_info *cfg, struct wiphy *wiphy,
brcmf_err("error (%d)\n", err);
return err;
}
brcmf_set_mpc(ifp, 0);
brcmf_scan_config_mpc(ifp, 0);
results = (struct brcmf_scan_results *)cfg->escan_info.escan_buf;
results->version = 0;
results->count = 0;
......@@ -930,7 +936,7 @@ brcmf_do_escan(struct brcmf_cfg80211_info *cfg, struct wiphy *wiphy,
err = escan->run(cfg, ifp, request, WL_ESCAN_ACTION_START);
if (err)
brcmf_set_mpc(ifp, 1);
brcmf_scan_config_mpc(ifp, 1);
return err;
}
......@@ -1021,7 +1027,7 @@ brcmf_cfg80211_escan(struct wiphy *wiphy, struct brcmf_cfg80211_vif *vif,
brcmf_err("WLC_SET_PASSIVE_SCAN error (%d)\n", err);
goto scan_out;
}
brcmf_set_mpc(ifp, 0);
brcmf_scan_config_mpc(ifp, 0);
err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SCAN,
&sr->ssid_le, sizeof(sr->ssid_le));
if (err) {
......@@ -1031,7 +1037,7 @@ brcmf_cfg80211_escan(struct wiphy *wiphy, struct brcmf_cfg80211_vif *vif,
else
brcmf_err("WLC_SCAN error (%d)\n", err);
brcmf_set_mpc(ifp, 1);
brcmf_scan_config_mpc(ifp, 1);
goto scan_out;
}
}
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment