Commit 9a391c7b authored by WingMan Kwok's avatar WingMan Kwok Committed by David S. Miller
Browse files

net: netcp: ethss: enhancement to support NetCP 1.5 ethss

NetCP 1.5 available on newer K2 SoCs such as K2E and K2L introduced 3
variants of the ethss subsystem, 9 port, 5 port and 2 port. These have
one host port towards the CPU and N external slave ports.

To customize the driver for these new ethss sub systems, multiple
compatibility strings are introduced. Currently some of parameters that
are different on different variants such as number of ALE ports, stats
modules and number of ports are defined through constants. These are now
changed to variables in gbe_priv data that get set based on the
compatibility string. This is required as there are no hardware
identification registers available to distinguish among the variants
of NetCP 1.5 ethss. However there is identification register available
to differentiate between NetCP 1.4 vs NetCP 1.5 and the same is made use
of in the code to differentiate them.

For more reading on the details of this peripheral, please refer to the
User Guide available at http://www.ti.com/lit/pdf/spruhz3

Signed-off-by: default avatarMurali Karicheri <m-karicheri2@ti.com>
Signed-off-by: default avatarWingMan Kwok <w-kwok2@ti.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: Mugunthan V N <mugunthanvnm@ti.com>
CC: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
CC: Grygorii Strashko <grygorii.strashko@ti.com>
CC: Christoph Jaeger <cj@linux.com>
CC: Lokesh Vutla <lokeshvutla@ti.com>
CC: Markus Pargmann <mpa@pengutronix.de>
CC: Kumar Gala <galak@codeaurora.org>
CC: Ian Campbell <ijc+devicetree@hellion.org.uk>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Pawel Moll <pawel.moll@arm.com>
CC: Rob Herring <robh+dt@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent da866ba0
......@@ -65,12 +65,30 @@ NetCP device properties: Device specification for NetCP sub-modules.
1Gb/10Gb (gbe/xgbe) ethernet switch sub-module specifications.
Required properties:
- label: Must be "netcp-gbe" for 1Gb & "netcp-xgbe" for 10Gb.
- compatible: Must be one of below:-
"ti,netcp-gbe" for 1GbE on NetCP 1.4
"ti,netcp-gbe-5" for 1GbE N NetCP 1.5 (N=5)
"ti,netcp-gbe-9" for 1GbE N NetCP 1.5 (N=9)
"ti,netcp-gbe-2" for 1GbE N NetCP 1.5 (N=2)
"ti,netcp-xgbe" for 10 GbE
- reg: register location and the size for the following register
regions in the specified order.
- switch subsystem registers
- sgmii port3/4 module registers (only for NetCP 1.4)
- switch module registers
- serdes registers (only for 10G)
NetCP 1.4 ethss, here is the order
index #0 - switch subsystem registers
index #1 - sgmii port3/4 module registers
index #2 - switch module registers
NetCP 1.5 ethss 9 port, 5 port and 2 port
index #0 - switch subsystem registers
index #1 - switch module registers
index #2 - serdes registers
- tx-channel: the navigator packet dma channel name for tx.
- tx-queue: the navigator queue number associated with the tx dma channel.
- interfaces: specification for each of the switch port to be registered as a
......
This diff is collapsed.
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment