Commit bd7c8a59 authored by Rafał Miłecki's avatar Rafał Miłecki Committed by John W. Linville
Browse files

b43: adjust code to compile without SSB



Users of new (BCMA based) wireless chipsets may not want to enable SSB.
This is hopefully the last code patch for dropping SSB dependency.
Signed-off-by: default avatarRafał Miłecki <zajec5@gmail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent fe5d9624
......@@ -116,7 +116,7 @@ config B43_PHY_N
config B43_PHY_LP
bool "Support for low-power (LP-PHY) devices"
depends on B43
depends on B43 && B43_SSB
default y
---help---
Support for the LP-PHY.
......
......@@ -5,7 +5,9 @@ enum b43_bus_type {
#ifdef CONFIG_B43_BCMA
B43_BUS_BCMA,
#endif
#ifdef CONFIG_B43_SSB
B43_BUS_SSB,
#endif
};
struct b43_bus_dev {
......@@ -52,13 +54,21 @@ struct b43_bus_dev {
static inline bool b43_bus_host_is_pcmcia(struct b43_bus_dev *dev)
{
#ifdef CONFIG_B43_SSB
return (dev->bus_type == B43_BUS_SSB &&
dev->sdev->bus->bustype == SSB_BUSTYPE_PCMCIA);
#else
return false;
#endif
}
static inline bool b43_bus_host_is_sdio(struct b43_bus_dev *dev)
{
#ifdef CONFIG_B43_SSB
return (dev->bus_type == B43_BUS_SSB &&
dev->sdev->bus->bustype == SSB_BUSTYPE_SDIO);
#else
return false;
#endif
}
struct b43_bus_dev *b43_bus_dev_bcma_init(struct bcma_device *core);
......
......@@ -1208,6 +1208,7 @@ static void b43_bcma_wireless_core_reset(struct b43_wldev *dev, bool gmode)
}
#endif
#ifdef CONFIG_B43_SSB
static void b43_ssb_wireless_core_reset(struct b43_wldev *dev, bool gmode)
{
struct ssb_device *sdev = dev->dev->sdev;
......@@ -1235,6 +1236,7 @@ static void b43_ssb_wireless_core_reset(struct b43_wldev *dev, bool gmode)
ssb_read32(sdev, SSB_TMSLOW); /* flush */
msleep(1);
}
#endif
void b43_wireless_core_reset(struct b43_wldev *dev, bool gmode)
{
......@@ -2735,6 +2737,8 @@ out:
/* Initialize the GPIOs
* http://bcm-specs.sipsolutions.net/GPIO
*/
#ifdef CONFIG_B43_SSB
static struct ssb_device *b43_ssb_gpio_dev(struct b43_wldev *dev)
{
struct ssb_bus *bus = dev->dev->sdev->bus;
......@@ -2745,10 +2749,13 @@ static struct ssb_device *b43_ssb_gpio_dev(struct b43_wldev *dev)
return bus->chipco.dev;
#endif
}
#endif
static int b43_gpio_init(struct b43_wldev *dev)
{
#ifdef CONFIG_B43_SSB
struct ssb_device *gpiodev;
#endif
u32 mask, set;
b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_GPOUTSMSK, 0);
......@@ -2807,7 +2814,9 @@ static int b43_gpio_init(struct b43_wldev *dev)
/* Turn off all GPIO stuff. Call this on module unload, for example. */
static void b43_gpio_cleanup(struct b43_wldev *dev)
{
#ifdef CONFIG_B43_SSB
struct ssb_device *gpiodev;
#endif
switch (dev->dev->bus_type) {
#ifdef CONFIG_B43_BCMA
......@@ -3692,7 +3701,9 @@ static void b43_op_set_tsf(struct ieee80211_hw *hw,
static void b43_put_phy_into_reset(struct b43_wldev *dev)
{
#ifdef CONFIG_B43_SSB
u32 tmp;
#endif
switch (dev->dev->bus_type) {
#ifdef CONFIG_B43_BCMA
......@@ -4582,8 +4593,12 @@ static void b43_imcfglo_timeouts_workaround(struct b43_wldev *dev)
struct ssb_bus *bus;
u32 tmp;
#ifdef CONFIG_B43_SSB
if (dev->dev->bus_type != B43_BUS_SSB)
return;
#else
return;
#endif
bus = dev->dev->sdev->bus;
......@@ -4738,7 +4753,7 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
}
if (sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW)
hf |= B43_HF_DSCRQ; /* Disable slowclock requests from ucode. */
#ifdef CONFIG_SSB_DRIVER_PCICORE
#if defined(CONFIG_B43_SSB) && defined(CONFIG_SSB_DRIVER_PCICORE)
if (dev->dev->bus_type == B43_BUS_SSB &&
dev->dev->sdev->bus->bustype == SSB_BUSTYPE_PCI &&
dev->dev->sdev->bus->pcicore.dev->id.revision <= 10)
......@@ -5310,6 +5325,7 @@ static int b43_one_core_attach(struct b43_bus_dev *dev, struct b43_wl *wl)
(pdev->subsystem_vendor == PCI_VENDOR_ID_##_subvendor) && \
(pdev->subsystem_device == _subdevice) )
#ifdef CONFIG_B43_SSB
static void b43_sprom_fixup(struct ssb_bus *bus)
{
struct pci_dev *pdev;
......@@ -5341,6 +5357,7 @@ static void b43_wireless_exit(struct b43_bus_dev *dev, struct b43_wl *wl)
ssb_set_devtypedata(dev->sdev, NULL);
ieee80211_free_hw(hw);
}
#endif
static struct b43_wl *b43_wireless_init(struct b43_bus_dev *dev)
{
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment