Commit e206da0b authored by Greg Ungerer's avatar Greg Ungerer Committed by Linus Torvalds
Browse files

m68knommu: platform setup for 527x ColdFire parts



Switch to platform style configuration for 527x ColdFire parts.
Initial support is for the UARTs. DMA support moved to common code
for all ColdFire parts.
Signed-off-by: default avatarGreg Ungerer <gerg@uclinux.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 96db271a
......@@ -16,11 +16,11 @@
#include <linux/param.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/dma.h>
#include <linux/io.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfdma.h>
#include <asm/mcfuart.h>
/***************************************************************************/
......@@ -28,14 +28,72 @@ void coldfire_reset(void);
/***************************************************************************/
/*
* DMA channel base address table.
*/
unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS] = {
MCF_MBAR + MCFDMA_BASE0,
static struct mcf_platform_uart m527x_uart_platform[] = {
{
.mapbase = MCF_MBAR + MCFUART_BASE1,
.irq = MCFINT_VECBASE + MCFINT_UART0,
},
{
.mapbase = MCF_MBAR + MCFUART_BASE2,
.irq = MCFINT_VECBASE + MCFINT_UART1,
},
{
.mapbase = MCF_MBAR + MCFUART_BASE3,
.irq = MCFINT_VECBASE + MCFINT_UART2,
},
{ },
};
unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
static struct platform_device m527x_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = m527x_uart_platform,
};
static struct platform_device *m527x_devices[] __initdata = {
&m527x_uart,
};
/***************************************************************************/
#define INTC0 (MCF_MBAR + MCFICM_INTC0)
static void __init m527x_uart_init_line(int line, int irq)
{
u16 sepmask;
u32 imr;
if ((line < 0) || (line > 2))
return;
/* level 6, line based priority */
writeb(0x30+line, INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + line);
imr = readl(INTC0 + MCFINTC_IMRL);
imr &= ~((1 << (irq - MCFINT_VECBASE)) | 1);
writel(imr, INTC0 + MCFINTC_IMRL);
/*
* External Pin Mask Setting & Enable External Pin for Interface
*/
sepmask = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART);
if (line == 0)
sepmask |= UART0_ENABLE_MASK;
else if (line == 1)
sepmask |= UART1_ENABLE_MASK;
else if (line == 2)
sepmask |= UART2_ENABLE_MASK;
writew(sepmask, MCF_IPSBAR + MCF_GPIO_PAR_UART);
}
static void __init m527x_uarts_init(void)
{
const int nrlines = ARRAY_SIZE(m527x_uart_platform);
int line;
for (line = 0; (line < nrlines); line++)
m527x_uart_init_line(line, m527x_uart_platform[line].irq);
}
/***************************************************************************/
......@@ -54,10 +112,21 @@ void mcf_autovector(unsigned int vec)
/***************************************************************************/
void config_BSP(char *commandp, int size)
void __init config_BSP(char *commandp, int size)
{
mcf_disableall();
mach_reset = coldfire_reset;
}
/***************************************************************************/
static int __init init_BSP(void)
{
m527x_uarts_init();
platform_add_devices(m527x_devices, ARRAY_SIZE(m527x_devices));
return 0;
}
arch_initcall(init_BSP);
/***************************************************************************/
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment