1. 15 Jun, 2012 1 commit
    • Asias He's avatar
      block: Avoid missed wakeup in request waitqueue · 458f27a9
      Asias He authored
      After hot-unplug a stressed disk, I found that rl->wait[] is not empty
      while rl->count[] is empty and there are theads still sleeping on
      get_request after the queue cleanup. With simple debug code, I found
      there are exactly nr_sleep - nr_wakeup of theads in D state. So there
      are missed wakeup.
        $ dmesg | grep nr_sleep
        [   52.917115] ---> nr_sleep=1046, nr_wakeup=873, delta=173
        $ vmstat 1
        1 173  0 712640  24292  96172 0 0  0  0  419  757  0  0  0 100  0
      To quote Tejun:
        Ah, okay, freed_request() wakes up single waiter with the assumption
        that after the wakeup there will at least be one successful allocation
        which in turn will continue the wakeup chain until the wait list is
        empty - ie. waiter wakeup is dependent on successful request
        allocation happening after each wakeup.  With queue marked dead, any
        woken up waiter fails the allocation path, so the wakeup chaining is
        lost and we're left with hung waiters. What we need is wake_up_all()
        after drain completion.
      This patch fixes the missed wakeup by waking up all the theads which
      are sleeping on wait queue after queue drain.
      Changes in v2: Drop waitqueue_active() optimization
      Acked-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarAsias He <asias@redhat.com>
      Fixed a bug by me, where stacked devices would oops on calling
      blk_drain_queue() since ->rq.wait[] do not get initialized unless
      it's a full queue setup.
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
  2. 13 Jun, 2012 4 commits
  3. 12 Jun, 2012 4 commits
    • Lars Ellenberg's avatar
      drbd: fix null pointer dereference with on-congestion policy when diskless · 0d5934e3
      Lars Ellenberg authored
      We must not look at mdev->actlog, unless we have a get_ldev() reference.
      It also does not make much sense to try to disconnect or pull-ahead of
      the peer, if we don't have good local data.
      Only even consider congestion policies, if our local disk is D_UP_TO_DATE.
      Signed-off-by: default avatarPhilipp Reisner <philipp.reisner@linbit.com>
      Signed-off-by: default avatarLars Ellenberg <lars.ellenberg@linbit.com>
    • Lars Ellenberg's avatar
      drbd: fix list corruption by failing but already aborted reads · 1ed25b26
      Lars Ellenberg authored
      If a read is aborted due to force-detach of a supposedly unresponsive
      local backing device, and retried on the peer, it can happen that the
      local request later still completes (hopefully with an error).
      As it may already have been completed to upper layers meanwhile,
      it must not be retried again now.
      Signed-off-by: default avatarPhilipp Reisner <philipp.reisner@linbit.com>
      Signed-off-by: default avatarLars Ellenberg <lars.ellenberg@linbit.com>
    • Lars Ellenberg's avatar
      drbd: fix access of unallocated pages and kernel panic · 4eccc579
      Lars Ellenberg authored
      BUG: unable to handle kernel NULL pointer dereference at (null)
       [<d1e17561>] ? _drbd_bm_set_bits+0x151/0x240 [drbd]
       [<d1e236f8>] ? receive_bitmap+0x4f8/0xbc0 [drbd]
      This fixes an off-by-one error in the receive_bitmap() path,
      if run-length encoded bitmap transfer is enabled.
      If the bitmap is an exact multiple of PAGE_SIZE, which means the visible
      capacity of the drbd device is an exact multiple of 128 MiB (for 4k page
      size), and bitmap compression (use-rle) is enabled (which became default
      with 8.4), and the very last bit is dirty and reported in an rle
      comressed bitmap packet, we ended up trying to kmap_atomic a page pointer
      that does not exist (bitmap->bm_pages[last index + 1]).
      bug introduced by:
          Date:   Fri Jul 24 15:33:24 2009 +0200
          set bits: optimize for complete last word, fix off-by-one-word corner case
      made effective by:
          Date:   Thu Dec 16 00:32:38 2010 +0100
          drbd: get rid of unused debug code
          Long time ago, we had paranoia code in the bitmap that allocated one
          extra word, assigned a magic value, and checked on every occasion that
          the magic value was still unchanged.
          That debug code is unused, the extra long word complicates code a bit.
          Get rid of it.
      No-one triggered this bug in the last few years, because a large subset
      of our userbase is unaffected:
       * typically the last few blocks of a device are not modified
         frequently, and remain unset
       * use-rle was disabled by default in drbd < 8.4
       * those with slightly "odd" device sizes, or
       * drbd internal meta data (which will skew the device size slightly,
         thus makes it harder to have a bug relevant device size)
      Signed-off-by: default avatarPhilipp Reisner <philipp.reisner@linbit.com>
      Signed-off-by: default avatarLars Ellenberg <lars.ellenberg@linbit.com>
    • Konrad Rzeszutek Wilk's avatar
      xen/blkfront: Add WARN to deal with misbehaving backends. · 6878c32e
      Konrad Rzeszutek Wilk authored
      Part of the ring structure is the 'id' field which is under
      control of the frontend. The frontend stamps it with "some"
      value (this some in this implementation being a value less
      than BLK_RING_SIZE), and when it gets a response expects
      said value to be in the response structure. We have a check
      for the id field when spolling new requests but not when
      de-spolling responses.
      We also add an extra check in add_id_to_freelist to make
      sure that the 'struct request' was not NULL - as we cannot
      pass a NULL to __blk_end_request_all, otherwise that crashes
      (and all the operations that the response is dealing with
      end up with __blk_end_request_all).
      Lastly we also print the name of the operation that failed.
      [v1: s/BUG/WARN/ suggested by Stefano]
      [v2: Add extra check in add_id_to_freelist]
      [v3: Redid op_name per Jan's suggestion]
      [v4: add const * and add WARN on failure returns]
      Acked-by: default avatarJan Beulich <jbeulich@suse.com>
      Acked-by: default avatarStefano Stabellini <stefano.stabellini@eu.citrix.com>
      Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
  4. 06 Jun, 2012 1 commit
  5. 05 Jun, 2012 2 commits
  6. 04 Jun, 2012 8 commits
    • Tejun Heo's avatar
      blkcg: fix blkg_alloc() failure path · 9b2ea86b
      Tejun Heo authored
      When policy data allocation fails in the middle, blkg_alloc() invokes
      blkg_free() to destroy the half constructed blkg.  This ends up
      calling pd_exit_fn() on policy datas which didn't go through
      pd_init_fn().  Fix it by making blkg_alloc() call pd_init_fn()
      immediately after each policy data allocation.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Acked-by: default avatarVivek Goyal <vgoyal@redhat.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
    • Tejun Heo's avatar
      block: blkcg_policy_cfq shouldn't be used if !CONFIG_CFQ_GROUP_IOSCHED · ffea73fc
      Tejun Heo authored
      cfq may be built w/ or w/o blkcg support depending on
      CONFIG_CFQ_CGROUP_IOSCHED.  If blkcg support is disabled, most of
      related code is ifdef'd out but some part is left dangling -
      blkcg_policy_cfq is left zero-filled and blkcg_policy_[un]register()
      calls are made on it.
      Feeding zero filled policy to blkcg_policy_register() is incorrect and
      triggers the following WARN_ON() if CONFIG_BLK_CGROUP &&
       ------------[ cut here ]------------
       WARNING: at block/blk-cgroup.c:867
       Modules linked in:
       Modules linked in:
       CPU: 3 Not tainted 3.4.0-09547-gfb21affa
       Process swapper/0 (pid: 1, task: 000000003ff80000, ksp: 000000003ff7f8b8)
       Krnl PSW : 0704100180000000 00000000003d76ca (blkcg_policy_register+0xca/0xe0)
      	    R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:1 PM:0 EA:3
       Krnl GPRS: 0000000000000000 00000000014b85ec 00000000014b85b0 0000000000000000
      	    000000000096fb60 0000000000000000 00000000009a8e78 0000000000000048
      	    000000000099c070 0000000000b6f000 0000000000000000 000000000099c0b8
      	    00000000014b85b0 0000000000667580 000000003ff7fd98 000000003ff7fd70
       Krnl Code: 00000000003d76be: a7280001           lhi     %r2,1
      	    00000000003d76c2: a7f4ffdf           brc     15,3d7680
      	   #00000000003d76c6: a7f40001           brc     15,3d76c8
      	   >00000000003d76ca: a7c8ffea           lhi     %r12,-22
      	    00000000003d76ce: a7f4ffce           brc     15,3d766a
      	    00000000003d76d2: a7f40001           brc     15,3d76d4
      	    00000000003d76d6: a7c80000           lhi     %r12,0
      	    00000000003d76da: a7f4ffc2           brc     15,3d765e
       Call Trace:
       ([<0000000000b6f000>] initcall_debug+0x0/0x4)
        [<0000000000989e8a>] cfq_init+0x62/0xd4
        [<00000000001000ba>] do_one_initcall+0x3a/0x170
        [<000000000096fb60>] kernel_init+0x214/0x2bc
        [<0000000000623202>] kernel_thread_starter+0x6/0xc
        [<00000000006231fc>] kernel_thread_starter+0x0/0xc
       no locks held by swapper/0/1.
       Last Breaking-Event-Address:
        [<00000000003d76c6>] blkcg_policy_register+0xc6/0xe0
       ---[ end trace b8ef4903fcbf9dd3 ]---
      This patch fixes the problem by ensuring all blkcg support code is
      * blkcg_policy_cfq declaration and blkg_to_cfqg() definition are moved
        inside the first CONFIG_CFQ_GROUP_IOSCHED block.  __maybe_unused is
        dropped from blkcg_policy_cfq decl.
      * blkcg_deactivate_poilcy() invocation is moved inside ifdef.  This
        also makes the activation logic match cfq_init_queue().
      * All blkcg_policy_[un]register() invocations are moved inside ifdef.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Reported-by: default avatarHeiko Carstens <heiko.carstens@de.ibm.com>
      LKML-Reference: <20120601112954.GC3535@osiris.boeblingen.de.ibm.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
    • Tejun Heo's avatar
      block: fix return value on cfq_init() failure · fd794956
      Tejun Heo authored
      cfq_init() would return zero after kmem cache creation failure.  Fix
      so that it returns -ENOMEM.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
    • Sachin Kamat's avatar
      mtip32xx: Remove version.h header file inclusion · 87c9ea76
      Sachin Kamat authored
      version.h header file inclusion is no longer required.
      Signed-off-by: default avatarSachin Kamat <sachin.kamat@linaro.org>
    • Kukjin Kim's avatar
      gpio/samsung: fix the typo 'exynos5_xxx' instead of 'exonys5_xxx' · 5041caa4
      Kukjin Kim authored
      Should be 'exynos5_xxx' instead of 'exonys5_xxx'.
      It happened at the commit 30b84288 ("Merge tag 'soc2' of
      during v3.5 merge window.
      Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
      [ My bad  - Linus ]
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
    • Linus Torvalds's avatar
      Merge branch 'pm-acpi' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm · 4d578573
      Linus Torvalds authored
      Pull some left-over PM patches from Rafael J. Wysocki.
      * 'pm-acpi' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
        ACPI / PM: Make acpi_pm_device_sleep_state() follow the specification
        ACPI / PM: Make __acpi_bus_get_power() cover D3cold correctly
        ACPI / PM: Fix error messages in drivers/acpi/bus.c
        rtc-cmos / PM: report wakeup event on ACPI RTC alarm
        ACPI / PM: Generate wakeup events on fixed power button
    • Linus Torvalds's avatar
      Revert "mm: compaction: handle incorrect MIGRATE_UNMOVABLE type pageblocks" · 68e3e926
      Linus Torvalds authored
      This reverts commit 5ceb9ce6
      That commit seems to be the cause of the mm compation list corruption
      issues that Dave Jones reported.  The locking (or rather, absense
      there-of) is dubious, as is the use of the 'page' variable once it has
      been found to be outside the pageblock range.
      So revert it for now, we can re-visit this for 3.6.  If we even need to:
      as Minchan Kim says, "The patch wasn't a bug fix and even test workload
      was very theoretical".
      Reported-and-tested-by: default avatarDave Jones <davej@redhat.com>
      Acked-by: default avatarHugh Dickins <hughd@google.com>
      Acked-by: default avatarKOSAKI Motohiro <kosaki.motohiro@gmail.com>
      Acked-by: default avatarMinchan Kim <minchan@kernel.org>
      Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: Kyungmin Park <kyungmin.park@samsung.com>
      Cc: Andrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
    • Hugh Dickins's avatar
      mm: fix warning in __set_page_dirty_nobuffers · 752dc185
      Hugh Dickins authored
      New tmpfs use of !PageUptodate pages for fallocate() is triggering the
      WARNING: at mm/page-writeback.c:1990 when __set_page_dirty_nobuffers()
      is called from migrate_page_copy() for compaction.
      It is anomalous that migration should use __set_page_dirty_nobuffers()
      on an address_space that does not participate in dirty and writeback
      accounting; and this has also been observed to insert surprising dirty
      tags into a tmpfs radix_tree, despite tmpfs not using tags at all.
      We should probably give migrate_page_copy() a better way to preserve the
      tag and migrate accounting info, when mapping_cap_account_dirty().  But
      that needs some more work: so in the interim, avoid the warning by using
      a simple SetPageDirty on PageSwapBacked pages.
      Reported-and-tested-by: default avatarDave Jones <davej@redhat.com>
      Signed-off-by: default avatarHugh Dickins <hughd@google.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
  7. 03 Jun, 2012 3 commits
    • Linus Torvalds's avatar
      vfs: move inode stat information closer together · 2f9d3df8
      Linus Torvalds authored
      The comment above it says "Stat data, not accessed from path walking",
      but in fact some of inode fields we use for the common stat data was way
      down at the end of the inode, causing unnecessary cache misses for the
      common stat operations.
      The inode structure is pretty big, and this can change padding depending
      on field width, but at least on the common 64-bit configurations this
      doesn't change the size.  Some of our inode layout has historically been
      to tro to avoid unnecessary padding fields, but cache locality is at
      least as important for layout, if not more.
      Noticed by looking at kernel profiles, and noticing that the "i_blkbits"
      access stood out like a sore thumb.
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
    • Linus Torvalds's avatar
      Linux 3.5-rc1 · f8f5701b
      Linus Torvalds authored
    • Linus Torvalds's avatar
      Merge tag 'dm-3.5-changes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm · 912afc36
      Linus Torvalds authored
      Pull device-mapper updates from Alasdair G Kergon:
       "Improve multipath's retrying mechanism in some defined circumstances
        and provide a simple reserve/release mechanism for userspace tools to
        access thin provisioning metadata while the pool is in use."
      * tag 'dm-3.5-changes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
        dm thin: provide userspace access to pool metadata
        dm thin: use slab mempools
        dm mpath: allow ioctls to trigger pg init
        dm mpath: delay retry of bypassed pg
        dm mpath: reduce size of struct multipath
  8. 02 Jun, 2012 17 commits
    • Joe Thornber's avatar
      dm thin: provide userspace access to pool metadata · cc8394d8
      Joe Thornber authored
      This patch implements two new messages that can be sent to the thin
      pool target allowing it to take a snapshot of the _metadata_.  This,
      read-only snapshot can be accessed by userland, concurrently with the
      live target.
      Only one metadata snapshot can be held at a time.  The pool's status
      line will give the block location for the current msnap.
      Since version 0.1.5 of the userland thin provisioning tools, the
      thin_dump program displays the msnap as follows:
          thin_dump -m <msnap root> <metadata dev>
      Available here: https://github.com/jthornber/thin-provisioning-tools
      Now that userland can access the metadata we can do various things
      that have traditionally been kernel side tasks:
           i) Incremental backups.
           By using metadata snapshots we can work out what blocks have
           changed over time.  Combined with data snapshots we can ensure
           the data doesn't change while we back it up.
           A short proof of concept script can be found here:
           ii) Migration of thin devices from one pool to another.
           iii) Merging snapshots back into an external origin.
           iv) Asyncronous replication.
      Signed-off-by: default avatarJoe Thornber <ejt@redhat.com>
      Signed-off-by: default avatarAlasdair G Kergon <agk@redhat.com>
    • Mike Snitzer's avatar
      dm thin: use slab mempools · a24c2569
      Mike Snitzer authored
      Use dedicated caches prefixed with a "dm_" name rather than relying on
      kmalloc mempools backed by generic slab caches so the memory usage of
      thin provisioning (and any leaks) can be accounted for independently.
      Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
      Signed-off-by: default avatarAlasdair G Kergon <agk@redhat.com>
    • Mikulas Patocka's avatar
      dm mpath: allow ioctls to trigger pg init · 35991652
      Mikulas Patocka authored
      After the failure of a group of paths, any alternative paths that
      need initialising do not become available until further I/O is sent to
      the device.  Until this has happened, ioctls return -EAGAIN.
      With this patch, new paths are made available in response to an ioctl
      too.  The processing of the ioctl gets delayed until this has happened.
      Instead of returning an error, we submit a work item to kmultipathd
      (that will potentially activate the new path) and retry in ten
      Note that the patch doesn't retry an ioctl if the ioctl itself fails due
      to a path failure.  Such retries should be handled intelligently by the
      code that generated the ioctl in the first place, noting that some SCSI
      commands should not be retried because they are not idempotent (XOR write
      commands).  For commands that could be retried, there is a danger that
      if the device rejected the SCSI command, the path could be errorneously
      marked as failed, and the request would be retried on another path which
      might fail too.  It can be determined if the failure happens on the
      device or on the SCSI controller, but there is no guarantee that all
      SCSI drivers set these flags correctly.
      Signed-off-by: default avatarMikulas Patocka <mpatocka@redhat.com>
      Signed-off-by: default avatarAlasdair G Kergon <agk@redhat.com>
    • Mike Christie's avatar
      dm mpath: delay retry of bypassed pg · f220fd4e
      Mike Christie authored
      If I/O needs retrying and only bypassed priority groups are available,
      set the pg_init_delay_retry flag to wait before retrying.
      If, for example, the reason for the bypass is that the controller is
      getting reset or there is a firmware upgrade happening, retrying right
      away would cause a flood of log messages and retries for what could be a
      few seconds or even several minutes.
      Signed-off-by: default avatarMike Christie <michaelc@cs.wisc.edu>
      Acked-by: default avatarMike Snitzer <snitzer@redhat.com>
      Signed-off-by: default avatarAlasdair G Kergon <agk@redhat.com>
    • Mike Snitzer's avatar
      dm mpath: reduce size of struct multipath · 1fbdd2b3
      Mike Snitzer authored
      Move multipath structure's 'lock' and 'queue_size' members to eliminate
      two 4-byte holes.  Also use a bit within a single unsigned int for each
      existing flag (saves 8-bytes).  This allows future flags to be added
      without each consuming an unsigned int.
      Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
      Acked-by: default avatarHannes Reinecke <hare@suse.de>
      Signed-off-by: default avatarAlasdair G Kergon <agk@redhat.com>
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 4fc3acf2
      Linus Torvalds authored
      Pull networking updates from David Miller:
       1) Make syn floods consume significantly less resources by
          a) Not pre-COW'ing routing metrics for SYN/ACKs
          b) Mirroring the device queue mapping of the SYN for the SYN/ACK
          Both from Eric Dumazet.
       2) Fix calculation errors in Byte Queue Limiting, from Hiroaki SHIMODA.
       3) Validate the length requested when building a paged SKB for a
          socket, so we don't overrun the page vector accidently.  From Jason
       4) When netlabel is disabled, we abort all IP option processing when we
          see a CIPSO option.  This isn't the right thing to do, we should
          simply skip over it and continue processing the remaining options
          (if any).  Fix from Paul Moore.
       5) SRIOV fixes for the mellanox driver from Jack orgenstein and Marcel
       6) 8139cp enables the receiver before the ring address is properly
          programmed, which potentially lets the device crap over random
          memory.  Fix from Jason Wang.
       7) e1000/e1000e fixes for i217 RST handling, and an improper buffer
          address reference in jumbo RX frame processing from Bruce Allan and
          Sebastian Andrzej Siewior, respectively.
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
        fec_mpc52xx: fix timestamp filtering
        mcs7830: Implement link state detection
        e1000e: fix Rapid Start Technology support for i217
        e1000: look into the page instead of skb->data for e1000_tbi_adjust_stats()
        r8169: call netif_napi_del at errpaths and at driver unload
        tcp: reflect SYN queue_mapping into SYNACK packets
        tcp: do not create inetpeer on SYNACK message
        8139cp/8139too: terminate the eeprom access with the right opmode
        8139cp: set ring address before enabling receiver
        cipso: handle CIPSO options correctly when NetLabel is disabled
        net: sock: validate data_len before allocating skb in sock_alloc_send_pskb()
        bql: Avoid possible inconsistent calculation.
        bql: Avoid unneeded limit decrement.
        bql: Fix POSDIFF() to integer overflow aware.
        net/mlx4_core: Fix obscure mlx4_cmd_box parameter in QUERY_DEV_CAP
        net/mlx4_core: Check port out-of-range before using in mlx4_slave_cap
        net/mlx4_core: Fixes for VF / Guest startup flow
        net/mlx4_en: Fix improper use of "port" parameter in mlx4_en_event
        net/mlx4_core: Fix number of EQs used in ICM initialisation
        net/mlx4_core: Fix the slave_id out-of-range test in mlx4_eq_int
    • Linus Torvalds's avatar
      Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 63004afa
      Linus Torvalds authored
      Pull straggler x86 fixes from Peter Anvin:
       "Three groups of patches:
        - EFI boot stub documentation and the ability to print error messages;
        - Removal for PTRACE_ARCH_PRCTL for x32 (obsolete interface which
          should never have been ported, and the port is broken and
          potentially dangerous.)
        - ftrace stack corruption fixes.  I'm not super-happy about the
          technical implementation, but it is probably the least invasive in
          the short term.  In the future I would like a single method for
          nesting the debug stack, however."
      * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        x86, x32, ptrace: Remove PTRACE_ARCH_PRCTL for x32
        x86, efi: Add EFI boot stub documentation
        x86, efi; Add EFI boot stub console support
        x86, efi: Only close open files in error path
        ftrace/x86: Do not change stacks in DEBUG when calling lockdep
        x86: Allow nesting of the debug stack IDT setting
        x86: Reset the debug_stack update counter
        ftrace: Use breakpoint method to update ftrace caller
        ftrace: Synchronize variable setting with breakpoints
    • Linus Torvalds's avatar
      tty: Revert the tty locking series, it needs more work · f309532b
      Linus Torvalds authored
      This reverts the tty layer change to use per-tty locking, because it's
      not correct yet, and fixing it will require some more deep surgery.
      The main revert is d29f3ef3 ("tty_lock: Localise the lock"), but
      there are several smaller commits that built upon it, they also get
      reverted here. The list of reverted commits is:
        fde86d31 - tty: add lockdep annotations
        8f6576ad - tty: fix ldisc lock inversion trace
        d3ca8b64 - pty: Fix lock inversion
        b1d679af - tty: drop the pty lock during hangup
        abcefe5f - tty/amiserial: Add missing argument for tty_unlock()
        fd11b42e - cris: fix missing tty arg in wait_event_interruptible_tty call
       - tty_lock: Localise the lock
      The revert had a trivial conflict in the 68360serial.c staging driver
      that got removed in the meantime.
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
    • Stephan Gatzka's avatar
      fec_mpc52xx: fix timestamp filtering · 9ca3cc6f
      Stephan Gatzka authored
      skb_defer_rx_timestamp was called with a freshly allocated skb but must
      be called with rskb instead.
      Signed-off-by: default avatarStephan Gatzka <stephan@gatzka.org>
      Cc: stable <stable@vger.kernel.org>
      Acked-by: default avatarRichard Cochran <richardcochran@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
    • Ondrej Zary's avatar
      mcs7830: Implement link state detection · b1ff4f96
      Ondrej Zary authored
      Add .status callback that detects link state changes.
      Tested with MCS7832CV-AA chip (9710:7830, identified as rev.C by the driver).
      Fixes https://bugzilla.kernel.org/show_bug.cgi?id=28532
      Signed-off-by: default avatarOndrej Zary <linux@rainbow-software.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
    • Linus Torvalds's avatar
      Merge 'for-linus' branches from git://git.kernel.org/pub/scm/linux/kernel/git/viro/{vfs,signal} · 233e562e
      Linus Torvalds authored
      Pull vfs fix and a fix from the signal changes for frv from Al Viro.
      The __kernel_nlink_t for powerpc got scrogged because 64-bit powerpc
      actually depended on the default "unsigned long", while 32-bit powerpc
      had an explicit override to "unsigned short".  Al didn't notice, and
      made both of them be the unsigned short.
      The frv signal fix is fallout from simplifying the do_notify_resume()
      code, and leaving an extra parenthesis.
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
        powerpc: Fix size of st_nlink on 64bit
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
        frv: Remove bogus closing parenthesis
    • Anton Blanchard's avatar
      powerpc: Fix size of st_nlink on 64bit · 0fd7bee1
      Anton Blanchard authored
      commit e57f93cc
       (powerpc: get rid of nlink_t uses, switch to
      explicitly-sized type) changed the size of st_nlink on ppc64 from
      a long to a short, resulting in boot failures.
      Signed-off-by: default avatarAnton Blanchard <anton@samba.org>
      Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
    • Geert Uytterhoeven's avatar
      frv: Remove bogus closing parenthesis · a3936249
      Geert Uytterhoeven authored
      Introduced by commit 6fd84c08
      ("TIF_RESTORE_SIGMASK can be set only when TIF_SIGPENDING is set")
      Signed-off-by: default avatarGeert Uytterhoeven <geert@linux-m68k.org>
      Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
    • Bruce Allan's avatar
      e1000e: fix Rapid Start Technology support for i217 · 6d7407bf
      Bruce Allan authored
      The definition of I217_PROXY_CTRL must use the BM_PHY_REG() macro instead
      of the PHY_REG() macro for PHY page 800 register 70 since it is for a PHY
      register greater than the maximum allowed by the latter macro, and fix a
      typo setting the I217_MEMPWR register in e1000_suspend_workarounds_ich8lan.
      Also for clarity, rename a few defines as bit definitions instead of masks.
      Signed-off-by: default avatarBruce Allan <bruce.w.allan@intel.com>
      Tested-by: default avatarAaron Brown <aaron.f.brown@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
    • Sebastian Andrzej Siewior's avatar
      e1000: look into the page instead of skb->data for e1000_tbi_adjust_stats() · 281a8f24
      Sebastian Andrzej Siewior authored
      This is another fixup where the data is not transfered into buffer
      addressed by skb->data but into a page.
      Signed-off-by: default avatarSebastian Andrzej Siewior <bigeasy@linutronix.de>
      Tested-by: default avatarAaron Brown <aaron.f.brown@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
    • Linus Torvalds's avatar
      Merge branch 'akpm' (Fixups for Andrew's patchbomb) · 829f51db
      Linus Torvalds authored
      Merge fixups for the mac NLS tables from Andrew.
      * emailed from Andrew Morton, and one cleanup by me:
        nls: fix (and rename) mac NLS table files and config options
        fs/nls/Makefile: remove bogus CONFIG_ assignments
    • Linus Torvalds's avatar
      nls: fix (and rename) mac NLS table files and config options · 8b8c0daa
      Linus Torvalds authored
      The config options in the Kconfig file (with _CODEPAGE_ in the name)
      didn't match the config option name in the Makefile (no _CODEPAGE_).
      And both of them were of the hard-to-read MACXYZZY variety, which made
      them hard to parse for normal humans: MACROMAN easily reads as "macro
      man", not as "Mac Roman".
      So rename the options to be consistent, and be NLS_MAC_xyzzy.  Rename
      the files to be mac-xyzzy.c too, and drop the "nls" part entirely (it's
      already in the directory name).
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>