1. 30 Mar, 2010 1 commit
    • Tejun Heo's avatar
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking... · 5a0e3ad6
      Tejun Heo authored
      include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
      
      percpu.h is included by sched.h and module.h and thus ends up being
      included when building most .c files.  percpu.h includes slab.h which
      in turn includes gfp.h making everything defined by the two files
      universally available and complicating inclusion dependencies.
      
      percpu.h -> slab.h dependency is about to be removed.  Prepare for
      this change by updating users of gfp and slab facilities include those
      headers directly instead of assuming availability.  As this conversion
      needs to touch large number of source files, the following script is
      used as the basis of conversion.
      
        http://userweb.kernel.org/~tj/misc/slabh-sweep.py
      
      
      
      The script does the followings.
      
      * Scan files for gfp and slab usages and update includes such that
        only the necessary includes are there.  ie. if only gfp is used,
        gfp.h, if slab is used, slab.h.
      
      * When the script inserts a new include, it looks at the include
        blocks and try to put the new include such that its order conforms
        to its surrounding.  It's put in the include block which contains
        core kernel includes, in the same order that the rest are ordered -
        alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
        doesn't seem to be any matching order.
      
      * If the script can't find a place to put a new include (mostly
        because the file doesn't have fitting include block), it prints out
        an error message indicating which .h file needs to be added to the
        file.
      
      The conversion was done in the following steps.
      
      1. The initial automatic conversion of all .c files updated slightly
         over 4000 files, deleting around 700 includes and adding ~480 gfp.h
         and ~3000 slab.h inclusions.  The script emitted errors for ~400
         files.
      
      2. Each error was manually checked.  Some didn't need the inclusion,
         some needed manual addition while adding it to implementation .h or
         embedding .c file was more appropriate for others.  This step added
         inclusions to around 150 files.
      
      3. The script was run again and the output was compared to the edits
         from #2 to make sure no file was left behind.
      
      4. Several build tests were done and a couple of problems were fixed.
         e.g. lib/decompress_*.c used malloc/free() wrappers around slab
         APIs requiring slab.h to be added manually.
      
      5. The script was run on all .h files but without automatically
         editing them as sprinkling gfp.h and slab.h inclusions around .h
         files could easily lead to inclusion dependency hell.  Most gfp.h
         inclusion directives were ignored as stuff from gfp.h was usually
         wildly available and often used in preprocessor macros.  Each
         slab.h inclusion directive was examined and added manually as
         necessary.
      
      6. percpu.h was updated not to include slab.h.
      
      7. Build test were done on the following configurations and failures
         were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
         distributed build env didn't work with gcov compiles) and a few
         more options had to be turned off depending on archs to make things
         build (like ipr on powerpc/64 which failed due to missing writeq).
      
         * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
         * powerpc and powerpc64 SMP allmodconfig
         * sparc and sparc64 SMP allmodconfig
         * ia64 SMP allmodconfig
         * s390 SMP allmodconfig
         * alpha SMP allmodconfig
         * um on x86_64 SMP allmodconfig
      
      8. percpu.h modifications were reverted so that it could be applied as
         a separate patch and serve as bisection point.
      
      Given the fact that I had only a couple of failures from tests on step
      6, I'm fairly confident about the coverage of this conversion patch.
      If there is a breakage, it's likely to be something in one of the arch
      headers which should be easily discoverable easily on most builds of
      the specific arch.
      Signed-off-by: default avatarTejun Heo <tj@kernel.org>
      Guess-its-ok-by: default avatarChristoph Lameter <cl@linux-foundation.org>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
      5a0e3ad6
  2. 16 Jun, 2009 1 commit
    • Linus Walleij's avatar
      i2c: Use resource_size macro · c6ffddea
      Linus Walleij authored
      
      
      This replace all instances in the i2c busses tree of
      res->end - res->start + 1 with the handy macro resource_size(res)
      from ioport.h (coming in from platform_device.h).
      
      This was created with a simple
      sed -i -e 's/\([a-z]*\)->end *- *[a-z]*->start *+ *1/resource_size(\1)/g'
      
      Then manually replacing the PXA redefiniton of the same kind
      of macro manually. Recompiled some ARM defconfigs I could find to
      make a rough test so it shouldn't break anything, though I
      couldn't see exactly which configs you need for all the drivers.
      Signed-off-by: default avatarLinus Walleij <linus.walleij@stericsson.com>
      Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
      c6ffddea
  3. 13 Jun, 2009 1 commit
    • Richard Röjfors's avatar
      i2c-ocores: Can add I2C devices to the bus · dd14be4c
      Richard Röjfors authored
      
      
      There is sometimes a need for the ocores driver to add devices to the
      bus when installed.
      
      i2c_register_board_info can not always be used, because the I2C devices
       are not known at an early state, they could for instance be connected
       on a I2C bus on a PCI device which has the Open Cores IP.
      
      i2c_new_device can not be used in all cases either since the resulting
      bus nummer might be unknown.
      
      The solution is the pass a list of I2C devices in the platform data to
      the Open Cores driver. This is useful for MFD drivers.
      Signed-off-by: default avatarRichard Röjfors <richard.rojfors.ext@mocean-labs.com>
      Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
      dd14be4c
  4. 14 Jul, 2008 2 commits
    • Manuel Lauss's avatar
      i2c-ocores: basic PM support · 2373c180
      Manuel Lauss authored
      
      
      Basic PM support: reinit the core on resume, disable it on suspend.
      Signed-off-by: default avatarManuel Lauss <mano@roarinelk.homelinux.net>
      Acked-by: default avatarPeter Korsgaard <jacmet@sunsite.dk>
      Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
      2373c180
    • Jean Delvare's avatar
      i2c: Let bus drivers add SPD to their class · 3401b2ff
      Jean Delvare authored
      
      
      Let general purpose I2C/SMBus bus drivers add SPD to their class. Once
      this is done, we will be able to tell the eeprom driver to only probe
      for SPD EEPROMs and similar on these buses.
      
      Note that I took a conservative approach here, adding I2C_CLASS_SPD to
      many drivers that have no idea whether they can host SPD EEPROMs or not.
      This is to make sure that the eeprom driver doesn't stop probing buses
      where SPD EEPROMs or equivalent live.
      
      So, bus driver maintainers and users should feel free to remove the SPD
      class from drivers those buses never have SPD EEPROMs or they don't
      want the eeprom driver to bind to them. Likewise, feel free to add the
      SPD class to any bus driver I might have missed.
      Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
      3401b2ff
  5. 22 Apr, 2008 1 commit
  6. 14 Feb, 2007 1 commit
    • Tim Schmielau's avatar
      [PATCH] remove many unneeded #includes of sched.h · cd354f1a
      Tim Schmielau authored
      
      
      After Al Viro (finally) succeeded in removing the sched.h #include in module.h
      recently, it makes sense again to remove other superfluous sched.h includes.
      There are quite a lot of files which include it but don't actually need
      anything defined in there.  Presumably these includes were once needed for
      macros that used to live in sched.h, but moved to other header files in the
      course of cleaning it up.
      
      To ease the pain, this time I did not fiddle with any header files and only
      removed #includes from .c-files, which tend to cause less trouble.
      
      Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
      arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
      allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
      configs in arch/arm/configs on arm.  I also checked that no new warnings were
      introduced by the patch (actually, some warnings are removed that were emitted
      by unnecessarily included header files).
      Signed-off-by: default avatarTim Schmielau <tim@physik3.uni-rostock.de>
      Acked-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      cd354f1a
  7. 05 Oct, 2006 1 commit
    • David Howells's avatar
      IRQ: Maintain regs pointer globally rather than passing to IRQ handlers · 7d12e780
      David Howells authored
      
      
      Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
      of passing regs around manually through all ~1800 interrupt handlers in the
      Linux kernel.
      
      The regs pointer is used in few places, but it potentially costs both stack
      space and code to pass it around.  On the FRV arch, removing the regs parameter
      from all the genirq function results in a 20% speed up of the IRQ exit path
      (ie: from leaving timer_interrupt() to leaving do_IRQ()).
      
      Where appropriate, an arch may override the generic storage facility and do
      something different with the variable.  On FRV, for instance, the address is
      maintained in GR28 at all times inside the kernel as part of general exception
      handling.
      
      Having looked over the code, it appears that the parameter may be handed down
      through up to twenty or so layers of functions.  Consider a USB character
      device attached to a USB hub, attached to a USB controller that posts its
      interrupts through a cascaded auxiliary interrupt controller.  A character
      device driver may want to pass regs to the sysrq handler through the input
      layer which adds another few layers of parameter passing.
      
      I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
      main part of the code on FRV and i386, though I can't test most of the drivers.
      I've also done partial conversion for powerpc and MIPS - these at least compile
      with minimal configurations.
      
      This will affect all archs.  Mostly the changes should be relatively easy.
      Take do_IRQ(), store the regs pointer at the beginning, saving the old one:
      
      	struct pt_regs *old_regs = set_irq_regs(regs);
      
      And put the old one back at the end:
      
      	set_irq_regs(old_regs);
      
      Don't pass regs through to generic_handle_irq() or __do_IRQ().
      
      In timer_interrupt(), this sort of change will be necessary:
      
      	-	update_process_times(user_mode(regs));
      	-	profile_tick(CPU_PROFILING, regs);
      	+	update_process_times(user_mode(get_irq_regs()));
      	+	profile_tick(CPU_PROFILING);
      
      I'd like to move update_process_times()'s use of get_irq_regs() into itself,
      except that i386, alone of the archs, uses something other than user_mode().
      
      Some notes on the interrupt handling in the drivers:
      
       (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
           the input_dev struct.
      
       (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
           something different depending on whether it's been supplied with a regs
           pointer or not.
      
       (*) Various IRQ handler function pointers have been moved to type
           irq_handler_t.
      Signed-Off-By: default avatarDavid Howells <dhowells@redhat.com>
      (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
      7d12e780
  8. 04 Oct, 2006 1 commit
  9. 26 Sep, 2006 1 commit
  10. 22 Jun, 2006 2 commits