1. 25 Mar, 2015 1 commit
    • Heiko Carstens's avatar
      s390: remove 31 bit support · 5a79859a
      Heiko Carstens authored
      Remove the 31 bit support in order to reduce maintenance cost and
      effectively remove dead code. Since a couple of years there is no
      distribution left that comes with a 31 bit kernel.
      The 31 bit kernel also has been broken since more than a year before
      anybody noticed. In addition I added a removal warning to the kernel
      shown at ipl for 5 minutes: a960062e ("s390: add 31 bit warning
      message") which let everybody know about the plan to remove 31 bit
      code. We didn't get any response.
      Given that the last 31 bit only machine was introduced in 1999 let's
      remove the code.
      Anybody with 31 bit user space code can still use the compat mode.
      Signed-off-by: default avatarHeiko Carstens <heiko.carstens@de.ibm.com>
      Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
  2. 13 Feb, 2015 1 commit
    • Andy Lutomirski's avatar
      all arches, signal: move restart_block to struct task_struct · f56141e3
      Andy Lutomirski authored
      If an attacker can cause a controlled kernel stack overflow, overwriting
      the restart block is a very juicy exploit target.  This is because the
      restart_block is held in the same memory allocation as the kernel stack.
      Moving the restart block to struct task_struct prevents this exploit by
      making the restart_block harder to locate.
      Note that there are other fields in thread_info that are also easy
      targets, at least on some architectures.
      It's also a decent simplification, since the restart code is more or less
      identical on all architectures.
      [james.hogan@imgtec.com: metag: align thread_info::supervisor_stack]
      Signed-off-by: default avatarAndy Lutomirski <luto@amacapital.net>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Al Viro <viro@zeniv.linux.org.uk>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Ingo Molnar <mingo@kernel.org>
      Cc: Kees Cook <keescook@chromium.org>
      Cc: David Miller <davem@davemloft.net>
      Acked-by: default avatarRichard Weinberger <richard@nod.at>
      Cc: Richard Henderson <rth@twiddle.net>
      Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
      Cc: Matt Turner <mattst88@gmail.com>
      Cc: Vineet Gupta <vgupta@synopsys.com>
      Cc: Russell King <rmk@arm.linux.org.uk>
      Cc: Catalin Marinas <catalin.marinas@arm.com>
      Cc: Will Deacon <will.deacon@arm.com>
      Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
      Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
      Cc: Steven Miao <realmz6@gmail.com>
      Cc: Mark Salter <msalter@redhat.com>
      Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
      Cc: Mikael Starvik <starvik@axis.com>
      Cc: Jesper Nilsson <jesper.nilsson@axis.com>
      Cc: David Howells <dhowells@redhat.com>
      Cc: Richard Kuo <rkuo@codeaurora.org>
      Cc: "Luck, Tony" <tony.luck@intel.com>
      Cc: Geert Uytterhoeven <geert@linux-m68k.org>
      Cc: Michal Simek <monstr@monstr.eu>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Jonas Bonn <jonas@southpole.se>
      Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
      Cc: Helge Deller <deller@gmx.de>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Paul Mackerras <paulus@samba.org>
      Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
      Tested-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
      Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
      Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
      Cc: Chen Liqin <liqin.linux@gmail.com>
      Cc: Lennox Wu <lennox.wu@gmail.com>
      Cc: Chris Metcalf <cmetcalf@ezchip.com>
      Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
      Cc: Chris Zankel <chris@zankel.net>
      Cc: Max Filippov <jcmvbkbc@gmail.com>
      Cc: Oleg Nesterov <oleg@redhat.com>
      Cc: Guenter Roeck <linux@roeck-us.net>
      Signed-off-by: default avatarJames Hogan <james.hogan@imgtec.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
  3. 03 Nov, 2014 1 commit
    • Martin Schwidefsky's avatar
      s390/signal: add sparse annotations · 37d2cd9d
      Martin Schwidefsky authored
      Fix the following warnings from the sparse code checker:
      arch/s390/kernel/signal.c:374:38: warning: cast removes address space of expression
      arch/s390/kernel/signal.c:374:65: warning: incorrect type in initializer (different address spaces)
      arch/s390/kernel/signal.c:374:65:    expected unsigned short [noderef] [usertype] <asn:1>*svc
      arch/s390/kernel/signal.c:374:65:    got void *
      arch/s390/kernel/compat_signal.c:437:38: warning: cast removes address space of expression
      arch/s390/kernel/compat_signal.c:437:65: warning: incorrect type in initializer (different address spaces)
      arch/s390/kernel/compat_signal.c:437:65:    expected unsigned short [noderef] [usertype] <asn:1>*svc
      arch/s390/kernel/compat_signal.c:437:65:    got void *
      Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
  4. 09 Oct, 2014 1 commit
    • Martin Schwidefsky's avatar
      s390: add support for vector extension · 80703617
      Martin Schwidefsky authored
      The vector extension introduces 32 128-bit vector registers and a set of
      instruction to operate on the vector registers.
      The kernel can control the use of vector registers for the problem state
      program with a bit in control register 0. Once enabled for a process the
      kernel needs to retain the content of the vector registers on context
      switch. The signal frame is extended to include the vector registers.
      Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added
      to the regset interface for the debugger and core dumps.
      Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
  5. 06 Aug, 2014 1 commit
  6. 20 May, 2014 1 commit
  7. 20 Nov, 2013 1 commit
    • Hendrik Brueckner's avatar
      s390/signal: always restore saved runtime instrumentation psw bit · aa7e04b3
      Hendrik Brueckner authored
      Commit "s390: fix handling of runtime instrumentation psw bit" (5ebf250d)
      changed the behavior of setting the runtime instrumentation psw bit.  This
      commit restores the original logic:
      1. When returning from the signal handler, the runtime instrumentation psw bit
         is restored to its saved state.
      2. If the runtime instrumentation psw bit is enabled during the signal handler,
         it is always turned off when leaving the signal handler.  The saved state
         is restored as described in 1.  That also implies that turning on runtime
         instrumentation in the signal handler is only effective while running in the
         signal context.
      Signed-off-by: default avatarHendrik Brueckner <brueckner@linux.vnet.ibm.com>
  8. 24 Oct, 2013 4 commits
  9. 28 Feb, 2013 1 commit
  10. 03 Feb, 2013 3 commits
  11. 23 Nov, 2012 1 commit
    • Martin Schwidefsky's avatar
      s390/ptrace: race of single stepping vs signal delivery · 39efd4ec
      Martin Schwidefsky authored
      The current single step code is racy in regard to concurrent delivery
      of signals. If a signal is delivered after a PER program check occurred
      but before the TIF_PER_TRAP bit has been checked in entry[64].S the code
      clears TIF_PER_TRAP and then calls do_signal. This is wrong, if the
      instruction completed (or has been suppressed) a SIGTRAP should be
      delivered to the debugger in any case. Only if the instruction has been
      nullified the SIGTRAP may not be send.
      The new logic always sets TIF_PER_TRAP if the program check indicates PER
      tracing but removes it again for all program checks that are nullifying.
      The effect is that for each change in the PSW address we now get a
      single SIGTRAP.
      Reported-by: default avatarAndreas Arnez <arnez@linux.vnet.ibm.com>
      Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
  12. 12 Nov, 2012 1 commit
    • Martin Schwidefsky's avatar
      s390/signal: set correct address space control · fa968ee2
      Martin Schwidefsky authored
      If user space is running in primary mode it can switch to secondary
      or access register mode, this is used e.g. in the clock_gettime code
      of the vdso. If a signal is delivered to the user space process while
      it has been running in access register mode the signal handler is
      executed in access register mode as well which will result in a crash
      most of the time.
      Set the address space control bits in the PSW to the default for the
      execution of the signal handler and make sure that the previous
      address space control is restored on signal return. Take care
      that user space can not switch to the kernel address space by
      modifying the registers in the signal frame.
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
  13. 20 Jul, 2012 1 commit
    • Heiko Carstens's avatar
      s390/comments: unify copyright messages and remove file names · a53c8fab
      Heiko Carstens authored
      Remove the file name from the comment at top of many files. In most
      cases the file name was wrong anyway, so it's rather pointless.
      Also unify the IBM copyright statement. We did have a lot of sightly
      different statements and wanted to change them one after another
      whenever a file gets touched. However that never happened. Instead
      people start to take the old/"wrong" statements to use as a template
      for new files.
      So unify all of them in one go.
      Signed-off-by: default avatarHeiko Carstens <heiko.carstens@de.ibm.com>
  14. 01 Jun, 2012 5 commits
  15. 24 May, 2012 1 commit
  16. 22 May, 2012 1 commit
  17. 16 May, 2012 1 commit
  18. 28 Mar, 2012 1 commit
  19. 11 Mar, 2012 1 commit
  20. 27 Feb, 2012 1 commit
  21. 27 Dec, 2011 1 commit
    • Martin Schwidefsky's avatar
      [S390] cleanup trap handling · aa33c8cb
      Martin Schwidefsky authored
      Move the program interruption code and the translation exception identifier
      to the pt_regs structure as 'int_code' and 'int_parm_long' and make the
      first level interrupt handler in entry[64].S store the two values. That
      makes it possible to drop 'prot_addr' and 'trap_no' from the thread_struct
      and to reduce the number of arguments to a lot of functions. Finally
      un-inline do_trap. Overall this saves 5812 bytes in the .text section of
      the 64 bit kernel.
      Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
  22. 01 Dec, 2011 1 commit
  23. 30 Oct, 2011 5 commits
    • Martin Schwidefsky's avatar
      [S390] allow all addressing modes · d4e81b35
      Martin Schwidefsky authored
      The user space program can change its addressing mode between the
      24-bit, 31-bit and the 64-bit mode if the kernel is 64 bit. Currently
      the kernel always forces the standard amode on signal delivery and
      signal return and on ptrace: 64-bit for a 64-bit process, 31-bit for
      a compat process and 31-bit kernels. Change the signal and ptrace code
      to allow the full range of addressing modes. Signal handlers are
      run in the standard addressing mode for the process.
      One caveat is that even an 31-bit compat process can switch to the
      64-bit mode. The next signal will switch back into the 31-bit mode
      and there is no room in the 31-bit compat signal frame to store the
      information that the program came from the 64-bit mode.
      Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
    • Martin Schwidefsky's avatar
      [S390] cleanup psw related bits and pieces · b50511e4
      Martin Schwidefsky authored
      Split out addressing mode bits from PSW_BASE_BITS, rename PSW_BASE_BITS
      to PSW_MASK_BASE, get rid of psw_user32_bits, remove unused function
      enabled_wait(), introduce PSW_MASK_USER, and drop PSW_MASK_MERGE macros.
      Change psw_kernel_bits / psw_user_bits to contain only the bits that
      are always set in the respective mode.
      Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
    • Martin Schwidefsky's avatar
      [S390] add TIF_SYSCALL thread flag · b6ef5bb3
      Martin Schwidefsky authored
      Add an explicit TIF_SYSCALL bit that indicates if a task is inside
      a system call. The svc_code in the pt_regs structure is now only
      valid if TIF_SYSCALL is set. With this definition TIF_RESTART_SVC
      can be replaced with TIF_SYSCALL. Overall do_signal is a bit more
      readable and it saves a few lines of code.
      Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
    • Martin Schwidefsky's avatar
      [S390] addressing mode limits and psw address wrapping · ccf45caf
      Martin Schwidefsky authored
      An instruction with an address right below the adress limit for the
      current addressing mode will wrap. The instruction restart logic in
      the protection fault handler and the signal code need to follow the
      wrapping rules to find the correct instruction address.
      Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
    • Martin Schwidefsky's avatar
      [S390] signal race with restarting system calls · 20b40a79
      Martin Schwidefsky authored
      do_signal will prepare the restart of the system call with a rewind of
      the PSW before calling get_signal_to_deliver (where the debugger might
      take control). For A ERESTART_RESTARTBLOCK restarting system call
      do_signal will set -EINTR as return code.
      There are two issues with this approach:
         ERESTART_RESTARTBLOCK as the rewinding already took place or the
         return code has been changed to -EINTR
      2) if get_signal_to_deliver does not return with a signal to deliver
         the restart via the repeat of the svc instruction is left in place.
         This opens a race if another signal is made pending before the
         system call instruction can be reexecuted. The original system call
         will be restarted even if the second signal would have ended the
         system call with -EINTR.
      These two issues can be solved by dropping the early rewind of the
      system call before get_signal_to_deliver has been called and by using
      the TIF_RESTART_SVC magic to do the restart if no signal has to be
      delivered. The only situation where the system call restart via the
      repeat of the svc instruction is appropriate is when a SA_RESTART
      signal is delivered to user space.
      Unfortunately this breaks inferior calls by the debugger again. The
      system call number and the length of the system call instruction is
      lost over the inferior call and user space will see ERESTARTNOHAND/
      new ptrace interface is added to save/restore the system call number
      and system call instruction length.
      Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
  24. 03 Aug, 2011 2 commits
  25. 05 Jan, 2011 1 commit
  26. 17 May, 2010 1 commit