Commit 72f78c69 authored by Roger Quadros's avatar Roger Quadros Committed by Tom Rini
Browse files

ARM: dts: Fix node status to "okay" on TI boards

As per Device Tree Specification [1], the status parameter of nodes can
be "okay", "disabled", etc. "ok" is not a valid parameter.

U-boot Driver Model does not recognize status="ok" either and treats
the node as disabled.

[1] https://github.com/devicetree-org/devicetree-specification/releases/tag/v0.3

Signed-off-by: default avatarRoger Quadros <rogerq@kernel.org>
Reviewed-by: default avatarNishanth Menon <nm@ti.com>
parent 7d67334d
......@@ -186,14 +186,14 @@
};
&mcbsp1 {
status = "ok";
status = "okay";
#sound-dai-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&mcbsp1_pins>;
};
&mcbsp2 {
status = "ok";
status = "okay";
#sound-dai-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&mcbsp2_pins>;
......
......@@ -193,7 +193,7 @@
};
&dss {
status = "ok";
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dss_dpi_pins>;
......
......@@ -742,7 +742,7 @@
};
&dss {
status = "ok";
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dss_pins>;
......
......@@ -752,7 +752,7 @@
};
&dss {
status = "ok";
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dss_pins>;
......
......@@ -528,13 +528,13 @@
};
&dss {
status = "ok";
status = "okay";
vdda_video-supply = <&ldoln_reg>;
};
&hdmi {
status = "ok";
status = "okay";
vdda-supply = <&ldo4_reg>;
port {
......@@ -545,7 +545,7 @@
};
&pcie1_rc {
status = "ok";
status = "okay";
gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
};
......
......@@ -405,7 +405,7 @@
&aemif {
pinctrl-names = "default";
pinctrl-0 = <&nand_pins>;
status = "ok";
status = "okay";
cs3 {
#address-cells = <2>;
#size-cells = <1>;
......
......@@ -501,7 +501,7 @@
};
&dcan1 {
status = "ok";
status = "okay";
pinctrl-names = "default", "sleep", "active";
pinctrl-0 = <&dcan1_pins_sleep>;
pinctrl-1 = <&dcan1_pins_sleep>;
......
......@@ -430,7 +430,7 @@
};
&dcan1 {
status = "ok";
status = "okay";
pinctrl-names = "default", "sleep", "active";
pinctrl-0 = <&dcan1_pins_sleep>;
pinctrl-1 = <&dcan1_pins_sleep>;
......@@ -499,11 +499,11 @@
};
&dss {
status = "ok";
status = "okay";
};
&hdmi {
status = "ok";
status = "okay";
port {
hdmi_out: endpoint {
......
......@@ -142,7 +142,7 @@
};
&mdio {
status = "ok";
status = "okay";
ethphy0: ethernet-phy@0 {
compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
reg = <0>;
......
......@@ -170,7 +170,7 @@
};
&mdio {
status = "ok";
status = "okay";
ethphy0: ethernet-phy@0 {
compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
reg = <0>;
......
......@@ -119,7 +119,7 @@
};
&mdio {
status = "ok";
status = "okay";
ethphy0: ethernet-phy@0 {
compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
reg = <0>;
......
......@@ -379,7 +379,7 @@
};
&dss {
status = "ok";
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <
......@@ -396,7 +396,7 @@
};
&venc {
status = "ok";
status = "okay";
vdda-supply = <&vdac>;
......
......@@ -353,7 +353,7 @@
};
&dss {
status = "ok";
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&dss_dpi_pins>;
......@@ -367,7 +367,7 @@
};
&venc {
status = "ok";
status = "okay";
vdda-supply = <&vdac>;
......@@ -380,7 +380,7 @@
};
&gpmc {
status = "ok";
status = "okay";
ranges = <0 0 0x30000000 0x1000000>; /* CS0 space, 16MB */
/* Chip select 0 */
......
......@@ -248,7 +248,7 @@
};
&dss {
status = "ok";
status = "okay";
port {
dpi_out: endpoint {
......
......@@ -46,7 +46,7 @@
};
&dss {
status = "ok";
status = "okay";
port {
dpi_out: endpoint {
remote-endpoint = <&lcd_in>;
......
......@@ -69,7 +69,7 @@
};
&ssi {
status = "ok";
status = "okay";
clocks = <&ssi_ssr_fck>,
<&ssi_sst_fck>,
......
......@@ -153,7 +153,7 @@
};
&ssi {
status = "ok";
status = "okay";
clocks = <&ssi_ssr_fck>,
<&ssi_sst_fck>,
......
......@@ -546,7 +546,7 @@
};
&dss {
status = "ok";
status = "okay";
port {
dpi_out: endpoint {
......@@ -557,12 +557,12 @@
};
&dsi2 {
status = "ok";
status = "okay";
vdd-supply = <&vcxio>;
};
&hdmi {
status = "ok";
status = "okay";
vdda-supply = <&vdac>;
port {
......
......@@ -648,11 +648,11 @@
};
&dss {
status = "ok";
status = "okay";
};
&dsi1 {
status = "ok";
status = "okay";
vdd-supply = <&vcxio>;
port {
......@@ -677,7 +677,7 @@
};
&dsi2 {
status = "ok";
status = "okay";
vdd-supply = <&vcxio>;
port {
......@@ -702,7 +702,7 @@
};
&hdmi {
status = "ok";
status = "okay";
vdda-supply = <&vdac>;
port {
......
......@@ -743,11 +743,11 @@
};
&dss {
status = "ok";
status = "okay";
};
&hdmi {
status = "ok";
status = "okay";
/* vdda-supply populated in board specific dts file */
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment