Commit 90986822 authored by Haibo Chen's avatar Haibo Chen Committed by Peng Fan
Browse files

mmc: fsl_esdhc_imx: remove the 1ms delay before sending command

This 1ms delay before sending command already exist from the beginning
of the fsl_esdhc driver added in year 2008. Now this driver has been
split for two files: fsl_esdhc.c and fsl_esdhc_imx.c. fsl_esdhc_imx.c
only for i.MX series. i.MX series esdhc/usdhc do not need this 1ms delay
before sending any command. So remove this 1ms, this will save a lot
time if handling a large mmc data.
Signed-off-by: default avatarHaibo Chen <>
parent ef5ab0d1
......@@ -462,13 +462,6 @@ static int esdhc_send_cmd_common(struct fsl_esdhc_priv *priv, struct mmc *mmc,
while (esdhc_read32(&regs->prsstat) & PRSSTAT_DLA)
/* Wait at least 8 SD clock cycles before the next command */
* Note: This is way more than 8 cycles, but 1ms seems to
* resolve timing issues with some cards
/* Set up for a data transfer if we have one */
if (data) {
err = esdhc_setup_data(priv, mmc, data);
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment