Commit bc17fccb authored by Vignesh Raghavendra's avatar Vignesh Raghavendra Committed by Lokesh Vutla
Browse files

ARM: dts: k3-am64-main: Add CPSW DT nodes



AM64 as CPSW3G IP with 2 external ports. Add DT entries for the same
(based on kernel DT).

Disable second port as its by default set to ICSS usage on EVM.
Signed-off-by: default avatarVignesh Raghavendra <vigneshr@ti.com>
parent 845e1060
......@@ -178,6 +178,12 @@
compatible = "ti,am654-chipid";
reg = <0x00000014 0x4>;
};
phy_gmii_sel: phy@4044 {
compatible = "ti,am654-phy-gmii-sel";
reg = <0x4044 0x8>;
#phy-cells = <1>;
};
};
main_uart0: serial@2800000 {
......@@ -403,6 +409,74 @@
ti,clkbuf-sel = <0x7>;
};
cpsw3g: ethernet@8000000 {
compatible = "ti,am642-cpsw-nuss";
#address-cells = <2>;
#size-cells = <2>;
reg = <0x0 0x8000000 0x0 0x200000>;
reg-names = "cpsw_nuss";
ranges = <0x0 0x0 0x0 0x8000000 0x0 0x200000>;
clocks = <&k3_clks 13 0>;
assigned-clocks = <&k3_clks 13 1>;
assigned-clock-parents = <&k3_clks 13 9>;
clock-names = "fck";
power-domains = <&k3_pds 13 TI_SCI_PD_EXCLUSIVE>;
dmas = <&main_pktdma 0xC500 15>,
<&main_pktdma 0xC501 15>,
<&main_pktdma 0xC502 15>,
<&main_pktdma 0xC503 15>,
<&main_pktdma 0xC504 15>,
<&main_pktdma 0xC505 15>,
<&main_pktdma 0xC506 15>,
<&main_pktdma 0xC507 15>,
<&main_pktdma 0x4500 15>;
dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6",
"tx7", "rx";
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
cpsw_port1: port@1 {
reg = <1>;
ti,mac-only;
label = "port1";
phys = <&phy_gmii_sel 1>;
mac-address = [00 00 de ad be ef];
};
cpsw_port2: port@2 {
reg = <2>;
ti,mac-only;
label = "port2";
phys = <&phy_gmii_sel 2>;
mac-address = [00 01 de ad be ef];
};
};
cpsw3g_mdio: mdio@f00 {
compatible = "ti,cpsw-mdio","ti,davinci_mdio";
reg = <0x0 0xf00 0x0 0x100>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&k3_clks 13 0>;
clock-names = "fck";
bus_freq = <1000000>;
};
cpts@3d000 {
compatible = "ti,j721e-cpts";
reg = <0x0 0x3d000 0x0 0x400>;
clocks = <&k3_clks 13 1>;
clock-names = "cpts";
interrupts-extended = <&gic500 GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cpts";
ti,cpts-ext-ts-inputs = <4>;
ti,cpts-periodic-outputs = <2>;
};
};
main_gpio0: gpio@600000 {
compatible = "ti,j721e-gpio", "ti,keystone-gpio";
reg = <0x00 0x00600000 0x00 0x100>;
......
......@@ -30,6 +30,8 @@
serial8 = &main_uart6;
i2c0 = &main_i2c0;
i2c1 = &main_i2c1;
ethernet0 = &cpsw_port1;
ethernet1 = &cpsw_port2;
};
chosen { };
......
......@@ -81,3 +81,19 @@
&sdhci1 {
u-boot,dm-spl;
};
&cpsw3g {
reg = <0x0 0x8000000 0x0 0x200000>,
<0x0 0x43000200 0x0 0x8>;
reg-names = "cpsw_nuss", "mac_efuse";
/delete-property/ ranges;
cpsw-phy-sel@04044 {
compatible = "ti,am64-phy-gmii-sel";
reg = <0x0 0x43004044 0x0 0x8>;
};
};
&cpsw_port2 {
status = "disabled";
};
......@@ -6,6 +6,8 @@
/dts-v1/;
#include <dt-bindings/leds/common.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/net/ti-dp83867.h>
#include "k3-am642.dtsi"
/ {
......@@ -101,6 +103,31 @@
default-state = "off";
};
};
mdio_mux: mux-controller {
compatible = "gpio-mux";
#mux-control-cells = <0>;
mux-gpios = <&exp1 12 GPIO_ACTIVE_HIGH>;
};
mdio-mux-1 {
compatible = "mdio-mux-multiplexer";
mux-controls = <&mdio_mux>;
mdio-parent-bus = <&cpsw3g_mdio>;
#address-cells = <1>;
#size-cells = <0>;
mdio@1 {
reg = <0x1>;
#address-cells = <1>;
#size-cells = <0>;
cpsw3g_phy3: ethernet-phy@3 {
reg = <3>;
};
};
};
};
&main_pmx0 {
......@@ -133,6 +160,47 @@
AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */
>;
};
mdio1_pins_default: mdio1-pins-default {
pinctrl-single,pins = <
AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */
AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
>;
};
rgmii1_pins_default: rgmii1-pins-default {
pinctrl-single,pins = <
AM64X_IOPAD(0x01cc, PIN_INPUT, 4) /* (W5) PRG0_PRU1_GPO7.RGMII1_RD0 */
AM64X_IOPAD(0x01d4, PIN_INPUT, 4) /* (Y5) PRG0_PRU1_GPO9.RGMII1_RD1 */
AM64X_IOPAD(0x01d8, PIN_INPUT, 4) /* (V6) PRG0_PRU1_GPO10.RGMII1_RD2 */
AM64X_IOPAD(0x01f4, PIN_INPUT, 4) /* (V5) PRG0_PRU1_GPO17.RGMII1_RD3 */
AM64X_IOPAD(0x0188, PIN_INPUT, 4) /* (AA5) PRG0_PRU0_GPO10.RGMII1_RXC */
AM64X_IOPAD(0x0184, PIN_INPUT, 4) /* (W6) PRG0_PRU0_GPO9.RGMII1_RX_CTL */
AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */
AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */
AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */
AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */
AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4) /* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */
AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */
>;
};
rgmii2_pins_default: rgmii2-pins-default {
pinctrl-single,pins = <
AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */
AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */
AM64X_IOPAD(0x0110, PIN_INPUT, 4) /* (AA12) PRG1_PRU1_GPO2.RGMII2_RD2 */
AM64X_IOPAD(0x0114, PIN_INPUT, 4) /* (Y12) PRG1_PRU1_GPO3.RGMII2_RD3 */
AM64X_IOPAD(0x0120, PIN_INPUT, 4) /* (U11) PRG1_PRU1_GPO6.RGMII2_RXC */
AM64X_IOPAD(0x0118, PIN_INPUT, 4) /* (W12) PRG1_PRU1_GPO4.RGMII2_RX_CTL */
AM64X_IOPAD(0x0134, PIN_OUTPUT, 4) /* (AA10) PRG1_PRU1_GPO11.RGMII2_TD0 */
AM64X_IOPAD(0x0138, PIN_OUTPUT, 4) /* (V10) PRG1_PRU1_GPO12.RGMII2_TD1 */
AM64X_IOPAD(0x013c, PIN_OUTPUT, 4) /* (U10) PRG1_PRU1_GPO13.RGMII2_TD2 */
AM64X_IOPAD(0x0140, PIN_OUTPUT, 4) /* (AA11) PRG1_PRU1_GPO14.RGMII2_TD3 */
AM64X_IOPAD(0x0148, PIN_OUTPUT, 4) /* (Y10) PRG1_PRU1_GPO16.RGMII2_TXC */
AM64X_IOPAD(0x0144, PIN_OUTPUT, 4) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */
>;
};
};
&main_uart0 {
......@@ -227,6 +295,31 @@
status = "disabled";
};
&cpsw3g {
pinctrl-names = "default";
pinctrl-0 = <&mdio1_pins_default
&rgmii1_pins_default
&rgmii2_pins_default>;
};
&cpsw_port1 {
phy-mode = "rgmii-rxid";
phy-handle = <&cpsw3g_phy0>;
};
&cpsw_port2 {
phy-mode = "rgmii-rxid";
phy-handle = <&cpsw3g_phy3>;
};
&cpsw3g_mdio {
cpsw3g_phy0: ethernet-phy@0 {
reg = <0>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
};
};
&sdhci0 {
/* emmc */
bus-width = <8>;
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment