Hang with bootstd with broken SD card socket

From caleb

sjg1: o/, I've been running into this bootflow issue with standard boot. This board has a working internal MMC controller, working USB storage, and a broken sdcard slot, and "bootflow scan -b" gets stuck in this infinite loop https://p.calebs.dev/ae02f4@raw

ah bootdev_next_prio() always returns 0 at the end, i guess it should return ret instead

welp that doesn't fix it, im stumped

(from sjg): calebccff: There was a patch 'bootdev: avoid infinite probe loop' - does that help?

sjg1: no, because the loop is external to bootdev_next_prio()

U-Boot 2024.01-00167-g60d4fb06e5b5-dirty (Jan 23 2024 - 20:22:56 +0000)

Model: Qualcomm Technologies, Inc. QRB4210 RB2 DRAM: 1003 MiB (effective 2 GiB) Configured memory map: 0x0000000000001000 - 0x0000000040000000: DDR bank 0 0x0000000040000000 - 0x000000007eb00000: DDR bank 1 0x0000000080000000 - 0x00000000c0000000: DDR bank 2 Prev TTBR: 0x0000000000000000 Button 'Volume Up' bound to driver 'button_gpio' PSCI: v1.0 Core: 74 devices, 24 uclasses, devicetree: board MMC: sdhci_reset: Reset 0x1 never completed. mmc@4784000 - probe failed: -19 mmc@4744000: 0 Loading Environment from nowhere... OK qcom_pmic_pinctrl_probe(gpio@c000) In: serial,button-kbd Out: serial,vidconsole Err: serial,vidconsole Failed to get bootargs Net: No ethernet found. Card did not respond to voltage select! : -110 mmc_init: -95, time 27 No EFI system partition No EFI system partition Failed to persist EFI variables Hit any key to stop autoboot: 0 => log level 9 => boot Sending event 5/(unknown) to spy 'efi_disk add' 0

0 'efi'
found Sending event 5/(unknown) to spy 'efi_disk add' 1
0 'efi'
1 'efi_mgr'
found Sending event 5/(unknown) to spy 'efi_disk add' 2
0 'efi'
1 'efi_mgr'
not found 3
0 'efi'
1 'efi_mgr'
not found 4
0 'efi'
1 'efi_mgr'
not found 5
0 'efi'
1 'efi_mgr'
not found 6
0 'efi'
1 'efi_mgr'
not found 7
0 'efi'
1 'efi_mgr'
not found 8
0 'efi'
1 'efi_mgr'
not found 9
0 'efi'
1 'efi_mgr'
not found 10
0 'efi'
1 'efi_mgr'
not found 11
0 'efi'
1 'efi_mgr'
not found 12
0 'efi'
1 'efi_mgr'
not found 13
0 'efi'
1 'efi_mgr'
not found 14
0 'efi'
1 'efi_mgr'
not found 15
0 'efi'
1 'efi_mgr'
not found 16
0 'efi'
1 'efi_mgr'
not found 17
0 'efi'
1 'efi_mgr'
not found 18
0 'efi'
1 'efi_mgr'
not found 19
0 'efi'
1 'efi_mgr'
not found 20
0 'efi'
1 'efi_mgr'
not found 21
0 'efi'
1 'efi_mgr'
not found 22
0 'efi'
1 'efi_mgr'
not found 23
0 'efi'
1 'efi_mgr'
not found 0
0 'efi'
found 1
0 'efi'
1 'efi_mgr'
found iter: Setting dev to (none), flags 0 check - ret=-22 entry: err=-22 inc_dev=0 Hunting for priority 1 exit 0
bootdev_hunt_prio() ret 0
targets 0000000000000000 setup labels 0000000000000000 next prio 0: dev=0000000000000000/none
mmc@4744000.bootdev: 2, want 0
mmc@4784000.bootdev: 2, want 0 None found at prio 0, moving to 1 Hunting for priority 1 exit 0
bootdev_hunt_prio() ret 0
mmc@4744000.bootdev: 2, want 1
mmc@4784000.bootdev: 2, want 1 None found at prio 1, moving to 2 Hunting for priority 2 Hunting with: mmc bootdev_hunt_drv() return 0 exit 0
bootdev_hunt_prio() ret 0
mmc@4744000.bootdev: 2, want 2 Sending event 5/(unknown) to spy 'efi_disk add' Selected bootdev: mmc@4744000.bootdev ret=0, dev=000000007e660050 mmc@4744000.bootdev probe mmc@4744000.bootdev 0 iter: Setting dev to mmc@4744000.bootdev, flags 0 iter_incr: ret=0 ->get_bootflow mmc@4744000.bootdev,0=0000000000000000 Card did not respond to voltage select! : -110 mmc_init: -95, time 27 sibling_blk ret=-95, blk=(none) check - ret=-108 entry: err=-108 inc_dev=1 labels 0000000000000000 next prio 2: dev=000000007e660050/mmc@4744000.bootdev
mmc@4784000.bootdev: 2, want 2 Looking for iommu@c600000 Looking for iommu@c600000 - checking iommu@59a0000 - checking iommu@c600000
- result for iommu@c600000: iommu@c600000 (ret=0)
- result for iommu@c600000: iommu@c600000 (ret=0) Looking for clock-controller@1400000 Looking for clock-controller@1400000
  - checking qcom_clk
- result for clock-controller@1400000: qcom_clk (ret=0)
- result for clock-controller@1400000: qcom_clk (ret=0) Looking for clock-controller@1400000 Looking for clock-controller@1400000
  - checking qcom_clk
- result for clock-controller@1400000: qcom_clk (ret=0)
- result for clock-controller@1400000: qcom_clk (ret=0) Looking for clock-controller Looking for clock-controller
  - checking qcom_clk
  - checking xo-board
  - checking sleep-clk
  - checking can-clk
- result for clock-controller: (none) (ret=-19)
- result for clock-controller: (none) (ret=-19) Device 'mmc@4784000.bootdev' failed to probe
mmc@4744000.bootdev: 2, want 2 ret=0, dev=000000007e660050 mmc@4744000.bootdev probe mmc@4744000.bootdev 0 iter: Setting dev to mmc@4744000.bootdev, flags 0 iter_incr: ret=0 ->get_bootflow mmc@4744000.bootdev,0=0000000000000000 Card did not respond to voltage select! : -110 mmc_init: -95, time 28 sibling_blk ret=-95, blk=(none) check - ret=-108 entry: err=-108 inc_dev=1 labels 0000000000000000 next prio 2: dev=000000007e660050/mmc@4744000.bootdev
mmc@4784000.bootdev: 2, want 2 Looking for iommu@c600000 Looking for iommu@c600000 - checking iommu@59a0000 - checking iommu@c600000
- result for iommu@c600000: iommu@c600000 (ret=0)
- result for iommu@c600000: iommu@c600000 (ret=0) Looking for clock-controller@1400000 Looking for clock-controller@1400000
  - checking qcom_clk
- result for clock-controller@1400000: qcom_clk (ret=0)
- result for clock-controller@1400000: qcom_clk (ret=0) Looking for clock-controller@1400000 Looking for clock-controller@1400000
  - checking qcom_clk
- result for clock-controller@1400000: qcom_clk (ret=0)
- result for clock-controller@1400000: qcom_clk (ret=0) Looking for clock-controller Looking for clock-controller
  - checking qcom_clk
  - checking xo-board
  - checking sleep-clk
  - checking can-clk
- result for clock-controller: (none) (ret=-19)
- result for clock-controller: (none) (ret=-19) Device 'mmc@4784000.bootdev' failed to probe
mmc@4744000.bootdev: 2, want 2 ret=0, dev=000000007e660050 mmc@4744000.bootdev probe mmc@4744000.bootdev 0 iter: Setting dev to mmc@4744000.bootdev, flags 0 iter_incr: ret=0 ->get_bootflow mmc@4744000.bootdev,0=0000000000000000 Card did not respond to voltage select! : -110 mmc_init: -95, time 28 sibling_blk ret=-95, blk=(none) check - ret=-108 entry: err=-108 inc_dev=1 labels 0000000000000000 next prio 2: dev=000000007e660050/mmc@4744000.bootdev
mmc@4784000.bootdev: 2, want 2 Looking for iommu@c600000 Looking for iommu@c600000 - checking iommu@59a0000 - checking iommu@c600000
- result for iommu@c600000: iommu@c600000 (ret=0)
- result for iommu@c600000: iommu@c600000 (ret=0) Looking for clock-controller@1400000 Looking for clock-controller@1400000
  - checking qcom_clk
- result for clock-controller@1400000: qcom_clk (ret=0)
- result for clock-controller@1400000: qcom_clk (ret=0) Looking for clock-controller@1400000 Looking for clock-controller@1400000
  - checking qcom_clk
- result for clock-controller@1400000: qcom_clk (ret=0)
- result for clock-controller@1400000: qcom_clk (ret=0) Looking for clock-controller Looking for clock-controller
  - checking qcom_clk
  - checking xo-board
  - checking sleep-clk
  - checking can-clk
- result for clock-controller: (none) (ret=-19)
- result for clock-controller: (none) (ret=-19) Device 'mmc@4784000.bootdev' failed to probe
mmc@4744000.bootdev: 2, want 2 ret=0, dev=000000007e660050 mmc@4744000.bootdev probe mmc@4744000.bootdev 0 iter: Setting dev to mmc@4744000.bootdev, flags 0 iter_incr: ret=0 ->get_bootflow mmc@4744000.bootdev,0=0000000000000000 Card did not respond to voltage select! : -110 mmc_init: -95, time 28 sibling_blk ret=-95, blk=(none) check - ret=-108 entry: err=-108 inc_dev=1 labels 0000000000000000 next prio 2: dev=000000007e660050/mmc@4744000.bootdev
mmc@4784000.bootdev: 2, want 2 Looking for iommu@c600000 Looking for iommu@c600000 - checking iommu@59a0000 - checking iommu@c600000
- result for iommu@c600000: iommu@c600000 (ret=0)
- result for iommu@c600000: iommu@c600000 (ret=0) Looking for clock-controller@1400000 Looking for clock-controller@1400000
  - checking qcom_clk
- result for clock-controller@1400000: qcom_clk (ret=0)
- result for clock-controller@1400000: qcom_clk (ret=0) Looking for clock-controller@1400000 Looking for clock-controller@1400000
  - checking qcom_clk
- result for clock-controller@1400000: qcom_clk (ret=0)
- result for clock-controller@1400000: qcom_clk (ret=0) Looking for clock-controller Looking for clock-controller
  - checking qcom_clk
  - checking xo-board
  - checking sleep-clk
  - checking can-clk
- result for clock-controller: (none) (ret=-19)
- result for clock-controller: (none) (ret=-19) Device 'mmc@4784000.bootdev' failed to probe
mmc@4744000.bootdev: 2, want 2 ret=0, dev=000000007e660050 mmc@4744000.bootdev probe mmc@4744000.bootdev 0 iter: Setting dev to mmc@4744000.bootdev, flags 0 iter_incr: ret=0 ->get_bootflow mmc@4744000.bootdev,0=0000000000000000 Card did not respond to voltage select! : -110 mmc_init: -95, time 28 sibling_blk ret=-95, blk=(none) check - ret=-108 entry: err=-108 inc_dev=1 labels 0000000000000000 next prio 2: dev=000000007e660050/mmc@4744000.bootdev
mmc@4784000.bootdev: 2, want 2 Looking for iommu@c600000 Looking for iommu@c600000 - checking iommu@59a0000 - checking iommu@c600000
- result for iommu@c600000: iommu@c600000 (ret=0)
- result for iommu@c600000: iommu@c600000 (ret=0) Looking for clock-controller@1400000 Looking for clock-controller@1400000
  - checking qcom_clk
- result for clock-controller@1400000: qcom_clk (ret=0)
- result for clock-controller@1400000: qcom_clk (ret=0) Looking for clock-controller@1400000 Looking for clock-controller@1400000
  - checking qcom_clk
- result for clock-controller@1400000: qcom_clk (ret=0)
- result for clock-controller@1400000: qcom_clk (ret=0) Looking for clock-controller Looking for clock-controller
  - checking qcom_clk
  - checking xo-board
  - checking sleep-clk
  - checking can-clk
- result for clock-controller: (none) (ret=-19)
- result for clock-controller: (none) (ret=-19) Device 'mmc@4784000.bootdev' failed to probe
mmc@4744000.bootdev: 2, want 2 ret=0, dev=000000007e660050 mmc@4744000.bootdev probe mmc@4744000.bootdev 0 iter: Setting dev to mmc@4744000.bootdev, flags 0 iter_incr: ret=0 ->get_bootflow mmc@4744000.bootdev,0=0000000000000000 Card did not respond to voltage select! : -110 mmc_init: -95, time 28 sibling_blk ret=-95, blk=(none) check - ret=-108 entry: err=-108 inc_dev=1 labels 0000000000000000 next prio 2: dev=000000007e660050/mmc@4744000.bootdev
mmc@4784000.bootdev: 2, want 2 Looking for iommu@c600000 Looking for iommu@c600000 - checking iommu@59a0000 - checking iommu@c600000
- result for iommu@c600000: iommu@c600000 (ret=0)
- result for iommu@c600000: iommu@c600000 (ret=0) Looking for clock-controller@1400000 Looking for clock-controller@1400000
  - checking qcom_clk
- result for clock-controller@1400000: qcom_clk (ret=0)
- result for clock-controller@1400000: qcom_clk (ret=0) Looking for clock-controller@1400000 Looking for clock-controller@1400000
  - checking qcom_clk
- result for clock-controller@1400000: qcom_clk (ret=0)
- result for clock-controller@1400000: qcom_clk (ret=0) Looking for clock-controller Looking for clock-controller
  - checking qcom_clk
  - checking xo-board
  - checking sleep-clk
  - checking can-clk
- result for clock-controller: (none) (ret=-19)
- result for clock-controller: (none) (ret=-19) Device 'mmc@4784000.bootdev' failed to probe
mmc@4744000.bootdev: 2, want 2 ret=0, dev=000000007e660050 mmc@4744000.bootdev probe mmc@4744000.bootdev 0 iter: Setting dev to mmc@4744000.bootdev, flags 0 iter_incr: ret=0 ->get_bootflow mmc@4744000.bootdev,0=0000000000000000 Card did not respond to voltage select! : -110 mmc_init: -95, time 28 sibling_blk ret=-95, blk=(none) check - ret=-108 entry: err=-108 inc_dev=1 labels 0000000000000000 next prio 2: dev=000000007e660050/mmc@4744000.bootdev
mmc@4784000.bootdev: 2, want 2 Looking for iommu@c600000 Looking for iommu@c600000 - checking iommu@59a0000 - checking iommu@c600000
- result for iommu@c600000: iommu@c600000 (ret=0)
- result for iommu@c600000: iommu@c600000 (ret=0) Looking for clock-controller@1400000 Looking for clock-controller@1400000
  - checking qcom_clk
- result for clock-controller@1400000: qcom_clk (ret=0)
- result for clock-controller@1400000: qcom_clk (ret=0) Looking for clock-controller@1400000 Looking for clock-controller@1400000
  - checking qcom_clk
- result for clock-controller@1400000: qcom_clk (ret=0)
- result for clock-controller@1400000: qcom_clk (ret=0) Looking for clock-controller Looking for clock-controller
  - checking qcom_clk
  - checking xo-board
  - checking sleep-clk
  - checking can-clk
- result for clock-controller: (none) (ret=-19)
- result for clock-controller: (none) (ret=-19) Device 'mmc@4784000.bootdev' failed to probe
mmc@4744000.bootdev: 2, want 2 ret=0, dev=000000007e660050 mmc@4744000.bootdev probe mmc@4744000.bootdev 0 iter: Setting dev to mmc@4744000.bootdev, flags 0 iter_incr: ret=0 ->get_bootflow mmc@4744000.bootdev,0=0000000000000000 Card did not respond to voltage select! : -110 mmc_init: -95, time 28 sibling_blk ret=-95, blk=(none) check - ret=-108 entry: err=-108 inc_dev=1 labels 0000000000000000 next prio 2: dev=000000007e660050/mmc@4744000.bootdev
mmc@4784000.bootdev: 2, want 2 Looking for iommu@c600000 Looking for iommu@c600000 - checking iommu@59a0000 - checking iommu@c600000
- result for iommu@c600000: iommu@c600000 (ret=0)
- result for iommu@c600000: iommu@c600000 (ret=0) Looking for clock-controller@1400000 Looking for clock-controller@1400000
  - checking qcom_clk
- result for clock-controller@1400000: qcom_clk (ret=0)
- result for clock-controller@1400000: qcom_clk (ret=0) Looking for clock-controller@1400000 Looking for clock-controller@1400000
  - checking qcom_clk
- result for clock-controller@1400000: qcom_clk (ret=0)
- result for clock-controller@1400000: qcom_clk (ret=0) Looking for clock-controller Looking for clock-controller
  - checking qcom_clk
  - checking xo-board
  - checking sleep-clk
  - checking can-clk
- result for clock-controller: (none) (ret=-19)
- result for clock-controller: (none) (ret=-19) Device 'mmc@4784000.bootdev' failed to probe
mmc@4744000.bootdev: 2, want 2 ret=0, dev=000000007e660050 mmc@4744000.bootdev probe mmc@4744000.bootdev 0 iter: Setting dev to mmc@4744000.bootdev, flags 0 iter_incr: ret=0 ->get_bootflow mmc@4744000.bootdev,0=0000000000000000 Card did not respond to voltage select! : -110 mmc_init: -95, time 28 sibling_blk ret=-95, blk=(none) check - ret=-108 entry: err=-108 inc_dev=1 labels 0000000000000000 next prio 2: dev=000000007e660050/mmc@4744000.bootdev
mmc@4784000.bootdev: 2, want 2 Looking for iommu@c600000 Looking for iommu@c600000 - checking iommu@59a0000 - checking iommu@c600000
- result for iommu@c600000: iommu@c600000 (ret=0)
- result for iommu@c600000: iommu@c600000 (ret=0) Looking for clock-controller@1400000 Looking for clock-controller@1400000
  - checking qcom_clk
- result for clock-controller@1400000: qcom_clk (ret=0)
- result for clock-controller@1400000: qcom_clk (ret=0) Looking for clock-controller@1400000 Looking for clock-controller@1400000
  - checking qcom_clk
- result for clock-controller@1400000: qcom_clk (ret=0)
- result for clock-controller@1400000: qcom_clk (ret=0) Looking for clock-controller Looking for clock-controller
  - checking qcom_clk
  - checking xo-board
  - checking sleep-clk
  - checking can-clk
- result for clock-controller: (none) (ret=-19)
- result for clock-controller: (none) (ret=-19) Device 'mmc@4784000.bootdev' failed to probe
mmc@4744000.bootdev: 2, want 2 ret=0, dev=000000007e660050 mmc@4744000.bootdev probe mmc@4744000.bootdev 0 iter: Setting dev to mmc@4744000.bootdev, flags 0 iter_incr: ret=0 ->get_bootflow mmc@4744000.bootdev,0=0000000000000000 Card did not respond to voltage select! : -110 mmc_init: -95, time 28 sibling_blk ret=-95, blk=(none) check - ret=-108 entry: err=-108 inc_dev=1 labels 0000000000000000 next prio 2: dev=000000007e660050/mmc@4744000.bootdev
mmc@4784000.bootdev: 2, want 2 Looking for iommu@c600000 Looking for iommu@c600000 - checking iommu@59a0000 - checking iommu@c600000
- result for iommu@c600000: iommu@c600000 (ret=0)
- result for iommu@c600000: iommu@c600000 (ret=0) Looking for clock-controller@1400000 Looking for clock-controller@1400000
  - checking qcom_clk
- result for clock-controller@1400000: qcom_clk (ret=0)
- result for clock-controller@1400000: qcom_clk (ret=0) Looking for clock-controller@1400000 Looking for clock-controller@1400000
  - checking qcom_clk
- result for clock-controller@1400000: qcom_clk (ret=0)
- result for clock-controller@1400000: qcom_clk (ret=0) Looking for clock-controller Looking for clock-controller
  - checking qcom_clk
  - checking xo-board
  - checking sleep-clk
  - checking can-clk
- result for clock-controller: (none) (ret=-19)
- result for clock-controller: (none) (ret=-19) Device 'mmc@4784000.bootdev' failed to probe
mmc@4744000.bootdev: 2, want 2 ret=0, dev=000000007e660050 mmc@4744000.bootdev probe mmc@4744000.bootdev 0 iter: Setting dev to mmc@4744000.bootdev, flags 0 iter_incr: ret=0 ->get_bootflow mmc@4744000.bootdev,0=0000000000000000 Card did not respond to voltage select! : -110 mmc_init: -95, time 28 sibling_blk ret=-95, blk=(none) check - ret=-108 entry: err=-108 inc_dev=1 labels 0000000000000000 next prio 2: dev=000000007e660050/mmc@4744000.bootdev
mmc@4784000.bootdev: 2, want 2 Looking for iommu@c600000 Looking for iommu@c600000 - checking iommu@59a0000 - checking iommu@c600000
- result for iommu@c600000: iommu@c600000 (ret=0)
- result for iommu@c600000: iommu@c600000 (ret=0) Looking for clock-controller@1400000 Looking for clock-controller@1400000
  - checking qcom_clk
- result for clock-controller@1400000: qcom_clk (ret=0)
- result for clock-controller@1400000: qcom_clk (ret=0) Looking for clock-controller@1400000 Looking for clock-controller@1400000
  - checking qcom_clk
- result for clock-controller@1400000: qcom_clk (ret=0)
- result for clock-controller@1400000: qcom_clk (ret=0) Looking for clock-controller Looking for clock-controller
  - checking qcom_clk
  - checking xo-board
  - checking sleep-clk
  - checking can-clk
- result for clock-controller: (none) (ret=-19)
- result for clock-controller: (none) (ret=-19) Device 'mmc@4784000.bootdev' failed to probe
mmc@4744000.bootdev: 2, want 2 ret=0, dev=000000007e660050 mmc@4744000.bootdev probe mmc@4744000.bootdev 0 iter: Setting dev to mmc@4744000.bootdev, flags 0 iter_incr: ret=0 ->get_bootflow mmc@4744000.bootdev,0=0000000000000000 Card did not respond to voltage select! : -110 mmc_init: -95, time 28 sibling_blk ret=-95, blk=(none) check - ret=-108 entry: err=-108 inc_dev=1 labels 0000000000000000 next prio 2: dev=000000007e660050/mmc@4744000.bootdev
mmc@4784000.bootdev: 2, want 2 Looking for iommu@c600000 Looking for iommu@c600000 - checking iommu@59a0000 - checking iommu@c600000
- result for iommu@c600000: iommu@c600000 (ret=0)
- result for iommu@c600000: iommu@c600000 (ret=0) Looking for clock-controller@1400000 Looking for clock-controller@1400000
  - checking qcom_clk
- result for clock-controller@1400000: qcom_clk (ret=0)
- result for clock-controller@1400000: qcom_clk (ret=0) Looking for clock-controller@1400000 Looking for clock-controller@1400000
  - checking qcom_clk
- result for clock-controller@1400000: qcom_clk (ret=0)
- result for clock-controller@1400000: qcom_clk (ret=0) Looking for clock-controller Looking for clock-controller
  - checking qcom_clk
  - checking xo-board
  - checking sleep-clk
  - checking can-clk
- result for clock-controller: (none) (ret=-19)
- result for clock-controller: (none) (ret=-19) Device 'mmc@4784000.bootdev' failed to probe
mmc@4744000.bootdev: 2, want 2 ret=0, dev=000000007e660050 mmc@4744000.bootdev probe mmc@4744000.bootdev 0 iter: Setting dev to mmc@4744000.bootdev, flags 0 iter_incr: ret=0 ->get_bootflow mmc@4744000.bootdev,0=0000000000000000 Card did not respond to voltage select! : -110 mmc_init: -95, time 28 sibling_blk ret=-95, blk=(none) check - ret=-108 entry: err=-108 inc_dev=1 labels 0000000000000000 next prio 2: dev=000000007e660050/mmc@4744000.bootdev
mmc@4784000.bootdev: 2, want 2 Looking for iommu@c600000 Looking for iommu@c600000 - checking iommu@59a0000 - checking iommu@c600000
- result for iommu@c600000: iommu@c600000 (ret=0)
- result for iommu@c600000: iommu@c600000 (ret=0) Looking for clock-controller@1400000 Looking for clock-controller@1400000
  - checking qcom_clk
- result for clock-controller@1400000: qcom_clk (ret=0)
- result for clock-controller@1400000: qcom_clk (ret=0) Looking for clock-controller@1400000 Looking for clock-controller@1400000
  - checking qcom_clk
- result for clock-controller@1400000: qcom_clk (ret=0)
- result for clock-controller@1400000: qcom_clk (ret=0) Looking for clock-controller Looking for clock-controller
  - checking qcom_clk
  - checking xo-board
  - checking sleep-clk
  - checking can-clk
- result for clock-controller: (none) (ret=-19)
- result for clock-controller: (none) (ret=-19) Device 'mmc@4784000.bootdev' failed to probe
mmc@4744000.bootdev: 2, want 2 ret=0, dev=000000007e660050 mmc@4744000.bootdev probe mmc@4744000.bootdev 0 iter: Setting dev to mmc@4744000.bootdev, flags 0 iter_incr: ret=0 ->get_bootflow mmc@4744000.bootdev,0=0000000000000000 Card did not respond to voltage select! : -110 mmc_init: -95, time 28 sibling_blk ret=-95, blk=(none) check - ret=-108 entry: err=-108 inc_dev=1 labels 0000000000000000 next prio 2: dev=000000007e660050/mmc@4744000.bootdev
mmc@4784000.bootdev: 2, want 2 Looking for iommu@c600000 Looking for iommu@c600000 - checking iommu@59a0000 - checking iommu@c600000
- result for iommu@c600000: iommu@c600000 (ret=0)
- result for iommu@c600000: iommu@c600000 (ret=0) Looking for clock-controller@1400000 Looking for clock-controller@1400000
  - checking qcom_clk
- result for clock-controller@1400000: qcom_clk (ret=0)
- result for clock-controller@1400000: qcom_clk (ret=0) Looking for clock-controller@1400000 Looking for clock-controller@1400000
  - checking qcom_clk
- result for clock-controller@1400000: qcom_clk (ret=0)
- result for clock-controller@1400000: qcom_clk (ret=0) Looking for clock-controller Looking for clock-controller
  - checking qcom_clk
  - checking xo-board
  - checking sleep-clk
  - checking can-clk
- result for clock-controller: (none) (ret=-19)
- result for clock-controller: (none) (ret=-19) Device 'mmc@4784000.bootdev' failed to probe
mmc@4744000.bootdev: 2, want 2 ret=0, dev=000000007e660050 mmc@4744000.bootdev probe mmc@4744000.bootdev 0 iter: Setting dev to mmc@4744000.bootdev, flags 0 iter_incr: ret=0 ->get_bootflow mmc@4744000.bootdev,0=0000000000000000 Card did not respond to voltage select! : -110 mmc_init: -95, time 27 sibling_blk ret=-95, blk=(none) check - ret=-108 entry: err=-108 inc_dev=1 labels 0000000000000000 next prio 2: dev=000000007e660050/mmc@4744000.bootdev
mmc@4784000.bootdev: 2, want 2 Looking for iommu@c600000

To upload designs, you'll need to enable LFS and have an admin enable hashed storage. More information